Figured Hard Maple Platforms

musky1963
musky1963 Posts: 275
edited February 2012 in For Sale (FS) Classifieds
Here is one of several hard maple platforms that I made. They have a natural/live edge on the fronts. I used to sell them on agon, before their site went south. The one in the pic measures approx 2" thick x 19 3/4" wide x 14'-15" deep. If there is a market for them here, I will take pics of the others w/ dimensions. All are similar. Very figured and very smooth finish. I will sell them ALOT cheaper than I used to, since CP has helped me alot :wink:. FWIW, I have been making custom furniture for over 25 years :redface: . $100 each.
400702265.jpg
400702264.jpg
400702262.jpg
400702261.jpg
Jeff
Post edited by musky1963 on
· Share on FacebookShare on Twitter
«1

Comments

  • vcwatkins
    vcwatkins Posts: 1,993
    edited January 2012
    Beautiful!
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
    · Share on FacebookShare on Twitter
  • EndersShadow
    EndersShadow Posts: 17,596
    edited January 2012
    Good Lord those things are sexy! If I didnt have finish carpenters in the family I would be looking in my wallet right now :smile:
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    Thanks! I am terrible with a camera, they look MUCH better than the pics.
    Jeff
    · Share on FacebookShare on Twitter
  • thsmith
    thsmith Posts: 6,082
    edited January 2012
    I am getting my rack this week and may be interested in 2 maybe 3. I need to take measurements to see if these will work.

    put me down as interested.
    Speakers: SDA-1C (most all the goodies)
    Preamp: Joule Electra LA-150 MKII SE
    Amp: Wright WPA 50-50 EAT KT88s
    Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
    Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
    Cables: Mits S3 IC and Spk cables| PS Audio PCs
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    Speaking of racks, here is one I made several years ago. This was HEAVY!


    367297386.jpg]
    367415417.jpg
    367297401.jpg
    367415426.jpg
    367415421.jpg
    Jeff
    · Share on FacebookShare on Twitter
  • flyfisher
    flyfisher Posts: 220
    edited January 2012
    That is one beautiful rack!!:lol:
    Living Room Monitor 60's*CS2*FXi A6's*VSX 21txh*BD-P1590
    Spare Room RTi A7*CSi A6*FXi A4's*Epik Legend*BDP-05fd*DVL-919 Laserdisc/DVD player
    · Share on FacebookShare on Twitter
  • halo71
    halo71 Posts: 4,606
    edited January 2012
    ****...that rack is amazing!
    --Gary--
    Onkyo Integra M504, Bottlehead Foreplay III, Denon SACD, Thiel CS2.3, NHT VT-2, VT-3 and Evolution T6, Infinity RSIIIa, SDA1C and a few dozen other speakers around the house I change in and out.
    · Share on FacebookShare on Twitter
  • Tony M
    Tony M Posts: 11,199
    edited January 2012
    Being a woodworker myself...You have awaken a desire to possibly make one myself. I can't afford that kind of special wood but I am inspired.

    Your rack is beautiful!!

    Great photos, thanks.
    Most people just listen to music and watch movies. I EXPERIENCE them.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,349
    edited January 2012
    OMG!!!!! That rack is amazing!!! Beautiful work!!!! I can't stop drooling over it..








    1
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • falconcry72
    falconcry72 Posts: 3,580
    edited January 2012
    cant see the pics at work...:mad:

    I'm interested, though. I'll check'em out when I get home.:smile:
    2-Channel: PC > Schiit Eitr > Audio Research DAC-8 > Audio Research LS-26 > Pass Labs X-250.5 > Magnepan 3.7's

    Living Room: PC > Marantz AV-7703 > Emotiva XPA-5 > Sonus Faber Liuto Towers, Sonus Faber Liuto Center, Sonus Faber Liuto Bookshelves > Dual SVS PC12-Pluses

    Office: Phone/Tablet > AudioEngine B1 > McIntosh D100 > Bryston 4B-ST > Polk Audio LSiM-703's
    · Share on FacebookShare on Twitter
  • DMara
    DMara Posts: 1,434
    edited January 2012
    falconcry72 wrote: »
    cant see the pics at work...:mad:

    I'm interested, though. I'll check'em out when I get home.:smile:

    Make sure the wife doesn't see you check out that rack.
    Gears shared to both living room & bedroom:
    Integra DHC-80.3 / Oppo BDP-105 / DirecTV HR24 DVR /APC S15blk PC-UPS
    Living room:
    LSiM707's / LSiM706c / LSiM702 F/X's / dual JL Audio Fathom F113's / Parasound Halo A51 / Panasonic 65" TC-P65VT50
    Bedroom:
    Usher Dancer Mini 2 Diamond DMD's / Logitech SB Touch / W4S STP-SE / W4S DAC-2 / W4S ST-1000 / Samsung 52" LN52B750
    Other rooms:
    Audioengine AP4's / GLOW Audio Sub One / audio-gd NFB-3 DAC / Audioengine N22
    audio-gd NFB-10.2 / Denon AH-D7000
    · Share on FacebookShare on Twitter
  • villock
    villock Posts: 72
    edited January 2012
    Please put me down for 1. And of course amazing work!
    SDA SRS 2.3tls; RDO 198's, Dynamatted, Armaflexed, Gimpod Boards, Crossovers by quadzilla: Clarity ESA 630V, Mills Resistors, Track Audio Spikes, Musky's Curly Maple Caps
    CSi5, FXi5, Rythmik D15SE sub, Pro-Ject Xpression III/Ortofon MC-3 Turbo. Pro-Ject Speed Box. Pro-Ject Tube Box II
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,804
    edited January 2012
    Damn nice rack!
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • audiocr381ve
    audiocr381ve Posts: 2,588
    edited January 2012
    That rack is insane. A piece of art really!
    · Share on FacebookShare on Twitter
  • halo71
    halo71 Posts: 4,606
    edited January 2012
    Oh snap...I gots da edit. Sorry Ken.... :redface:

    Just how much would that rack cost one of us? Jus' curious.
    --Gary--
    Onkyo Integra M504, Bottlehead Foreplay III, Denon SACD, Thiel CS2.3, NHT VT-2, VT-3 and Evolution T6, Infinity RSIIIa, SDA1C and a few dozen other speakers around the house I change in and out.
    · Share on FacebookShare on Twitter
  • evhudsons
    evhudsons Posts: 1,175
    edited January 2012
    Normally I get slapped when I compliment a nice rack, but I think I'm safe this time!

    Nice Rack!
    Polk Audio SDA CRS+ crossover 4.1TL by Trey/VR3 (Rings and custom stand by Larry)-Polk Audio SDA SRS2 crossovers by Trey/VR3Parasound HCA1500aYamaha rxa-3070 with musicast-Celestion SL6S presence,- sl9 surround backNHTsuper1's surroundMagnepan SMGParasound 1500pre- Sofia "Baby" tube amp - Monitor Audio Silver RX2 Marantz 2230/B&Kst140Technics 1200mk2 Gamertag: IslandBerserker I am but a infinitesimally small point meeting the line of infinity in the SDA universe
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    I ended up trading it for some gear a few years ago. Of course, I can make more. As far as price, well, not sure what to charge?
    Jeff
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    1 platform for villock . Thanks!
    Jeff
    · Share on FacebookShare on Twitter
  • michael1947
    michael1947 Posts: 775
    edited January 2012
    NICE RACK. and I love saying that, Nice Rack.
    Main Family Room: Sony 46 LCD, Sony Blue Ray, Sony DVD/VCR combo,Onkyo TXNR 708, Parasound 5250,
    Polk SDS-SRS with mods, CSI 5 center + Klipsch SC2, Polk RT2000P rears, Klipsch KG 1.5's sides, Polk Micro Pro 1000, Polk Micro Pro 2000, Polk SW505, Belkin PF60, Signal Cable Classics,Monster IC's, 2 15 amp circuits & 1 20 amp circuit.

    Living Room: Belkin PF60, Parasound HCA2200, MIT ProlineEXP balanced IC's,Emotiva XDA-1 DAC/Pre,Emotiva ERC2 transport,MIT AVT2, Polk LSI 9's.
    · Share on FacebookShare on Twitter
  • Big Dawg
    Big Dawg Posts: 2,005
    edited January 2012
    Sweet rack. And, I may be interested in a platform, although it would need to be something like 22" or 24" deep (need to check). Not for a couple months, though.

    Where are you located, near Erie?
    · Share on FacebookShare on Twitter
  • chandler9a
    chandler9a Posts: 878
    edited January 2012
    Very impressive work! Where are you located? I can't imagine it would be too far from where I am...Close enough to drive for work like that I can assure you.

    Very cool stuff
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    About 15 east of Erie, right on the lake near they PA/NY border.
    Jeff
    · Share on FacebookShare on Twitter
  • TECHNOKID
    TECHNOKID Posts: 4,298
    edited January 2012
    musky1963 wrote: »
    Speaking of racks, here is one I made several years ago. This was HEAVY!


    367297386.jpg]
    367415417.jpg
    367297401.jpg
    367415426.jpg
    367415421.jpg
    Beautifull craftsmanship, yes a real piece of art! Got to say it, beautifull RACK!!!
    DARE TO SOAR:
    “Your attitude, almost always determine your altitude in life” ;)
    · Share on FacebookShare on Twitter
  • Mike Reeter
    Mike Reeter Posts: 4,315
    edited January 2012
    Pamela Anderson has absolutely nothing on you,or should I say "your work"
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    Now these clocks are available...........no shipping on them though :eek:
    95938639.jpg
    95938658.jpg
    22293908.jpg
    Jeff
    · Share on FacebookShare on Twitter
  • musky1963
    musky1963 Posts: 275
    edited January 2012
    Here are some more of the platforms that are for sale.
    396198546.jpg
    Jeff
    · Share on FacebookShare on Twitter
  • Oldfatdogs
    Oldfatdogs Posts: 1,874
    edited January 2012
    Beautiful work Muskey,Its getting hard to find wood like that here in ca. If you do you pay through the nose.
    · Share on FacebookShare on Twitter
  • 72RR
    72RR Posts: 159
    edited January 2012
    Curious, how much does the lighthouse go for?
    Thanks
    · Share on FacebookShare on Twitter
  • villock
    villock Posts: 72
    edited January 2012
    Payment and email sent.

    Thanks Jeff
    SDA SRS 2.3tls; RDO 198's, Dynamatted, Armaflexed, Gimpod Boards, Crossovers by quadzilla: Clarity ESA 630V, Mills Resistors, Track Audio Spikes, Musky's Curly Maple Caps
    CSi5, FXi5, Rythmik D15SE sub, Pro-Ject Xpression III/Ortofon MC-3 Turbo. Pro-Ject Speed Box. Pro-Ject Tube Box II
    · Share on FacebookShare on Twitter
  • janmike
    janmike Posts: 6,146
    edited January 2012
    Very nice looking work.
    Michael ;)
    In the beginning, all knowledge was new!
    NORTH of 60°
    · Share on FacebookShare on Twitter