MIT Shotgun S3's in the house....

24

Comments

  • Drenis
    Drenis Posts: 2,871
    edited October 2011
    Not sure what YMMV means... first I've seen it...

    I've been doing my share of reading and am very interested in Signal cables, Audioquest or MIT as a cable upgrade. I never looked at pricing or began to investigate what that type of upgrade would cost. Hell it's more than the price of my speakers! I wish I could hear the sound difference on your setup.
    · Share on FacebookShare on Twitter
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    YMMV = Your Mileage May Vary

    I've used all three and the MIT's win by a wide margin. The other two are no slouches however. I started with Signal and moved to a lower end MIT and now the upper middle MIT.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
    · Share on FacebookShare on Twitter
  • brgman
    brgman Posts: 2,859
    edited October 2011
    regular or bi-wire H9?
    Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC

    Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords

    I’M OFFENDED!!!!
    · Share on FacebookShare on Twitter
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    Regular.

    To answer your ealier question I was using MIT Terminator II's. I will probably throw those up on the FM shortly.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited October 2011
    Drenis wrote: »
    Are those S3's really worth $1500? Seriously!?!? I thought $400 at most... gosh cables are NOT a cheap upgrade.

    That is inexpensive, especially for MIT. I upgraded a couple of years ago the S1.3 XLR series, and it was money well spent. The sound stage expanded, and the music became more detailed and focused. I sure am glad I have an active imagination to help me hear the improvements. :smile:
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,243
    edited October 2011
    Depends on the gear your running.. IMO Yes they are worth every penny..
    · Share on FacebookShare on Twitter
  • falconcry72
    falconcry72 Posts: 3,580
    edited October 2011
    Drenis wrote: »
    ...Hell it's more than the price of my speakers!

    Generally speaking, you shouldn't spend more on cables than on speakers because speakers are a bigger factor in the overall sound quality; however, there are exceptions, and used SDA's are one of them. You can get a great set of SDA's for a few hundred dollars, and it would be worth every penny to spend more than that on cables, like Brock here did.:cool:
    2-Channel: PC > Schiit Eitr > Audio Research DAC-8 > Audio Research LS-26 > Pass Labs X-250.5 > Magnepan 3.7's

    Living Room: PC > Marantz AV-7703 > Emotiva XPA-5 > Sonus Faber Liuto Towers, Sonus Faber Liuto Center, Sonus Faber Liuto Bookshelves > Dual SVS PC12-Pluses

    Office: Phone/Tablet > AudioEngine B1 > McIntosh D100 > Bryston 4B-ST > Polk Audio LSiM-703's
    · Share on FacebookShare on Twitter
  • EndersShadow
    EndersShadow Posts: 17,590
    edited October 2011
    For HT I probably wouldnt run them, but for my 2 channel rig I plan to.
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited October 2011
    EndersShadow wrote: »
    For HT I probably wouldnt run them, but for my 2 channel rig I plan to.

    I upgraded my HT to MIT CVT Terminator 1 inter-connects, and it made a big improvement. The soundtrack, especially for the surrounds, is clearer and more precise. A good movie soundtrack has lots of background sounds that are missed with inexpensive cables. I know this is a surprise for some of you, but movies are not all about boom, boom, boom.

    Also, your HT setup should also double as your SACD surround sound system. Unless you want crap music, you need to use good cables.

    http://www.mitcables.com/available-in-stores/audio-interconnects/cvt-terminator-1-rca-interconnect.html
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • EndersShadow
    EndersShadow Posts: 17,590
    edited October 2011
    BlueFox wrote: »
    I upgraded my HT to MIT CVT Terminator 1 inter-connects, and it made a big improvement. The soundtrack, especially for the surrounds, is clearer and more precise. A good movie soundtrack has lots of background sounds that are missed with inexpensive cables. I know this is a surprise for some of you, but movies are not all about boom, boom, boom.

    Also, your HT setup should also double as your SACD surround sound system. Unless you want crap music, you need to use good cables.

    http://www.mitcables.com/available-in-stores/audio-interconnects/cvt-terminator-1-rca-interconnect.html

    Maybe someday I will go there but as H9 and others have said before, cables should be the last thing in the chain you tweak. So in my case I still need to upgrade my amp and some other items (sub, avr, tv) before I deal with IC's and speaker wire.

    Hell I dont even own any SACD's and just recently burned all my music as FLAC to my laptop, so I got lots of other tweaking to do first.

    P.S. My current speaker wire is the stuff Mantis runs in his rig, and if its good enough for him, its good enough for me lol.....
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2011
    Everything is worth Everything, Electrons roll Endlessly delivering Electrifying Editings.

    So Cables Matter.

    RT1..let your bottles Fire.
    · Share on FacebookShare on Twitter
  • PolkClyde
    PolkClyde Posts: 662
    edited October 2011
    TOOLFORLIFEFAN wrote: »
    I think one could be set for life with the S3's They are that good!!!

    I'm Glad The God of Christ made the money available for me to purchase the S3's through out my system. My Girl friend can't believe that I paid as much as I did for cables and let me add, the Oppo95 blu-ray player connected with MIT S3's of course. She told me,"you are set for life,no more money towards Audio stuff." mmmmmm,I don't know about that. I do want to enter a place of peace and comfort, where I'm satisfied with my audio gear and not always upgrade every year or so.
    PolkAudioClyde
    · Share on FacebookShare on Twitter
  • thsmith
    thsmith Posts: 6,082
    edited October 2011
    Drenis wrote: »
    Are those S3's really worth $1500? Seriously!?!? I thought $400 at most... gosh cables are NOT a cheap upgrade.

    My S3 1m ICs were $179 new per pair (3 pairs) and 15' S3 speaker cables were about $900.

    Worth every penny.
    Speakers: SDA-1C (most all the goodies)
    Preamp: Joule Electra LA-150 MKII SE
    Amp: Wright WPA 50-50 EAT KT88s
    Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
    Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
    Cables: Mits S3 IC and Spk cables| PS Audio PCs
    · Share on FacebookShare on Twitter
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    Tracy,

    Where/when did you get new Shotgun S3 I/C's for that cheap? Right now Joe is selling NIB, discontinued Shotgun S3's for $329 and 8' S3 speaker cables for $729.

    What you paid for NEW is a hella super deal!!

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,243
    edited October 2011
    Gavin Fish is here in town and will be doing a seminar Saturday at 11:00 am at the RMAF about high end cables and the value of 2 cents..

    I will be there!!!!
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited October 2011
    heiney9 wrote: »
    Tracy,

    Where/when did you get new Shotgun S3 I/C's for that cheap? Right now Joe is selling NIB, discontinued Shotgun S3's for $329 and 8' S3 speaker cables for $729.

    What you paid for NEW is a hella super deal!!

    H9

    Sounds like a cable confusion scenario. Current generation S3.3 1m ICs are list $799. I doubt if generation 1 was not much less in price. Even a discounter would not make money at $179/pair. Unless they were stolen. :smile:

    http://www.mitcables.com/available-online/shotgun-s3.3-interconnect.html
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • madmax
    madmax Posts: 12,434
    edited October 2011
    Drenis wrote: »
    Are those S3's really worth $1500? Seriously!?!? I thought $400 at most... gosh cables are NOT a cheap upgrade.

    Easily worth more than they cost.
    Vinyl, the final frontier...

    Avantgarde horns, 300b tubes, thats the kinda crap I want... :D
    · Share on FacebookShare on Twitter
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    madmax wrote: »
    Easily worth more than they cost.

    I would agree. As I've gotten more and more time with them, I can't believe how these are sounding. Kind of eerie..........I was listening to The Cowboy Junkies - Long Journey Home (Live) Dvd last night. It was damn near a religious experience. Like they were right in my living room. These are some really superb sounding cables.

    Clarity, refinement, tone, voicing, are simply superb. I feel they have about the blackest background of any cable I've heard to date.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
    · Share on FacebookShare on Twitter
  • brgman
    brgman Posts: 2,859
    edited October 2011
    heiney9 wrote: »
    I would agree. As I've gotten more and more time with them, I can't believe how these are sounding. Kind of eerie..........I was listening to The Cowboy Junkies - Long Journey Home (Live) Dvd last night. It was damn near a religious experience. Like they were right in my living room. These are some really superb sounding cables.

    Clarity, refinement, tone, voicing, are simply superb. I feel they have about the blackest background of any cable I've heard to date.

    H9

    After reading this tread i couldn't help but break open the piggy bank.A local guy was selling a set of S3.3's just 6 months old.Got him down to less than half of new price.I've only had them for a day and had about an hour of listening and H9 couldn't have said it better.These suckers are sweet!
    Listened to PF Animals last night and the acoustic guitar was like having David Gilmour sitting on my sofa.
    Really incredible.
    I replaced AQ CV4.2's w/48DBS and also use some nice Audio Art SC5SE's.Both are great but these are just off the charts.
    Can't see upgrading for a looooooooong time.
    The guy is buying Morrow's instead.Don't know much about them.Hard to believe they could be better but maybe so....
    Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC

    Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords

    I’M OFFENDED!!!!
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2011
    falconcry72 wrote: »
    Your review may just push me over the edge...:redface:

    huh???...for at least the past seven years or so CP members have been giving these cables positive reviews....the things is when you get them like (H9 just did) most guys wish they had done so long ago, as you cannot make up lost days, so for a bit over a grand you can get two sets of IC and speaker cables. In the big picture not really that much, I think though everyone takes their individual path to accept they deserve a set of quality cables rather than wasting money on the necessaties of life.......the S-3 offer an awful lot, I use the S-1 as well and although I do enjoy them just a bit more, you are getting the magic with the S-3.

    Enjoy the cables H9.

    RT1
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,565
    edited October 2011
    Just a reminder, the MIT CVT1 cable demo/review program is available to those who qualify.

    http://www.polkaudio.com/forums/showthread.php?115800-MIT-CVT-1-Cable-Demo-Review-Round-3
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • inspiredsports
    inspiredsports Posts: 5,501
    edited October 2011
    brgman wrote: »
    After reading this tread i couldn't help but break open the piggy bank.A local guy was selling a set of S3.3's just 6 months old.Got him down to less than half of new price.I've only had them for a day and had about an hour of listening and H9 couldn't have said it better.These suckers are sweet!
    Listened to PF Animals last night and the acoustic guitar was like having David Gilmour sitting on my sofa.
    Really incredible.
    I replaced AQ CV4.2's w/48DBS and also use some nice Audio Art SC5SE's.Both are great but these are just off the charts.
    Can't see upgrading for a looooooooong time.
    The guy is buying Morrow's instead.Don't know much about them.Hard to believe they could be better but maybe so....

    I also found MIT's sound best when you use them system-wide, meaning all same-series MIT IC's, Speaker Interface Cables and Power Cables. So break open that piggy bank, and it's Mama too :mrgreen:
    VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
    Conrad Johnson PV-5 w/mods
    TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
    Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
    Tuners w/mods Kenwood KT5020 / Fisher KM60
    MF x-DAC V8, HAInfo NG27
    Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
    PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
    Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
    NAD SS rigs w/mods
    GIK panels
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,068
    edited October 2011
    brgman wrote: »
    After reading this tread i couldn't help but break open the piggy bank.A local guy was selling a set of S3.3's just 6 months old.Got him down to less than half of new price.I've only had them for a day and had about an hour of listening and H9 couldn't have said it better.These suckers are sweet!
    Listened to PF Animals last night and the acoustic guitar was like having David Gilmour sitting on my sofa.
    Really incredible.
    I replaced AQ CV4.2's w/48DBS and also use some nice Audio Art SC5SE's.Both are great but these are just off the charts.
    Can't see upgrading for a looooooooong time.
    The guy is buying Morrow's instead.Don't know much about them.Hard to believe they could be better but maybe so....

    I've been half tempted to give the Morrow Cables a try myself. Quite possibly in the near future. I'm always game for new auditions.
    "2 Channel & 11.2 HT "Two Channel:Magnepan LRSSchiit Audio Freya S - SS preConsonance Ref 50 - Tube preParasound HALO A21+ 2 channel ampBluesound NODE 2i streameriFi NEO iDSD DAC Oppo BDP-93KEF KC62 sub Home Theater:Full blown 11.2 set up.
    · Share on FacebookShare on Twitter
  • inspiredsports
    inspiredsports Posts: 5,501
    edited October 2011
    pearsall001 wrote: »
    I've been half tempted to give the Morrow Cables a try myself. Quite possibly in the near future. I'm always game for new auditions.

    It's an interesting website, but I can't find anything about Morrow's credentials or R&D department/R&D experience.

    He also appears to build them by hand himself, so there would be a huge component of labor in his pricing.

    I also noticed an anomaly in that his demo/returned cables are half-off right now, but so are his brand new cables so oddly, there is no savings at all for used/demo.
    VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
    Conrad Johnson PV-5 w/mods
    TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
    Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
    Tuners w/mods Kenwood KT5020 / Fisher KM60
    MF x-DAC V8, HAInfo NG27
    Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
    PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
    Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
    NAD SS rigs w/mods
    GIK panels
    · Share on FacebookShare on Twitter
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    MIT's will be my last stop on the cable train. I have been thrilled with all the MIT cables I've used. At some point in the future I may look at upgrading my power cables from MIT Z and Z-II's to something farther up the line and I'd like to get an MIT power center/conditioner. But that's in the future, right now I had to force myself not to listen to my rig last night so I could get caught up around the house rather than sitting on my kester listening to these fabulous cables.

    It's the synergy, what I had before was certainly extremely nice. But since the move to a new house, new room, etc something has just been a little off. Now that the Shotguns are in the mix, things are better than ever. There is a certain hyperactivity that's completely gone, a much more relaxed presentation but still all the resolution, detail and air. Everything seems more fluid and integrated.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
    · Share on FacebookShare on Twitter
  • amulford
    amulford Posts: 5,020
    edited October 2011
    There may be something better out there, but I haven't heard it yet. I think we are well into the diminishing return area here.

    There is definitely something to be said about the synergy. I started out with just 1 set of ic's and speaker cables. As I added sets the difference was marked. If I switched the source, you could really tell. It wound up taking a while and some coin, but I think I am done. The only thing I wish is that I could find some longer ic's relatively cheap...
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,243
    edited October 2011
    heiney9 wrote: »
    MIT's will be my last stop on the cable train. I have been thrilled with all the MIT cables I've used. At some point in the future I may look at upgrading my power cables from MIT Z and Z-II's to something farther up the line and I'd like to get an MIT power center/conditioner. But that's in the future, right now I had to force myself not to listen to my rig last night so I could get caught up around the house rather than sitting on my kester listening to these fabulous cables.

    It's the synergy, what I had before was certainly extremely nice. But since the move to a new house, new room, etc something has just been a little off. Now that the Shotguns are in the mix, things are better than ever. There is a certain hyperactivity that's completely gone, a much more relaxed presentation but still all the resolution, detail and air. Everything seems more fluid and integrated.

    H9


    MIT Cables will be the last I will buy but I will be making me a full set in the near future..
    · Share on FacebookShare on Twitter
  • falconcry72
    falconcry72 Posts: 3,580
    edited October 2011
    Larry, you gonna sell me your S3 IC's or what?:question::biggrin:
    2-Channel: PC > Schiit Eitr > Audio Research DAC-8 > Audio Research LS-26 > Pass Labs X-250.5 > Magnepan 3.7's

    Living Room: PC > Marantz AV-7703 > Emotiva XPA-5 > Sonus Faber Liuto Towers, Sonus Faber Liuto Center, Sonus Faber Liuto Bookshelves > Dual SVS PC12-Pluses

    Office: Phone/Tablet > AudioEngine B1 > McIntosh D100 > Bryston 4B-ST > Polk Audio LSiM-703's
    · Share on FacebookShare on Twitter
  • tonyb
    tonyb Posts: 32,967
    edited October 2011
    falconcry72 wrote: »
    Larry, you gonna sell me your S3 IC's or what?:question::biggrin:


    Hey now, Larry already promissed to sell them to me in exchange for my Brittney Spears blow up doll.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,068
    edited October 2011
    tonyb wrote: »
    Hey now, Larry already promissed to sell them to me in exchange for my Brittney Spears blow up doll.

    Sounds like a fair trade to me!
    "2 Channel & 11.2 HT "Two Channel:Magnepan LRSSchiit Audio Freya S - SS preConsonance Ref 50 - Tube preParasound HALO A21+ 2 channel ampBluesound NODE 2i streameriFi NEO iDSD DAC Oppo BDP-93KEF KC62 sub Home Theater:Full blown 11.2 set up.
    · Share on FacebookShare on Twitter