Need info Yaqin MC-10L
Comments
-
Here's a source of both info on tubes, and for purchases:
http://www.audiotubes.com/
Not affiliated in any way, except that I plan to purchase some 12AU7/ECC82's for my Candela linestage.
I've read that his reputation is good though."Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer -
Thanks for the link, but after reading the FAQ on that site I'm still not sure if I need to reset bias when installing the new 6N1P-EV's, I am keeping the stock EL34B Output tubes.
-
Bias is only for power tubes, you won't set the bias for signal tubes like driver and pre-amp tubes.
That's not to say you shouldn't rebias the power tubes if you are using a different driver tube, but if the driver tube/pre-amp tubes are similar in gain, etc you won't need to rebias.
H9"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul! -
Bias is only for power tubes, you won't set the bias for signal tubes like driver and pre-amp tubes.
That's not to say you shouldn't rebias the power tubes if you are using a different driver tube, but if the driver tube/pre-amp tubes are similar in gain, etc you won't need to rebias.
H9
Go it, Thank you very much!
