Subwoofer not working what to do?

surinder
surinder Posts: 2
edited November 2010 in Troubleshooting
My Polk audio DSW 600 pro stopped working in middle of a movie while master audio volume level +2 DB on my Onkyo 807 and at middle audio volume level on this active sub woofer.

I checked few things and got following results.

Sub working indicator on front of the sub gone off and blinks for split of a second when I press led on/off button from the remote. When I used level calibration for sub from AVR there is no sound from sub at all. When I switched the power toggle switch to on state the power indicating led on the rare starts blinking green in color same behavior of led I found when I switched it to auto mode. And led remains always orange when I switched it to standby mode while level calibration for sub from AVR was always present in all three modes. And in standby mode led turns orange to green for split of a second and gets back to orange in color when I press power on/off button from remote. I checked the fuse and it is not blown I even changed the power and coaxial cables but no success.

What all that means and what to do now?
Post edited by surinder on
· Share on FacebookShare on Twitter

Comments