Karma?
Options
dr1978
Posts: 424
Not sure if this would be a blessing or a curse, but...
I recently bought a Parasound HCA1200 on Ebay. When it arrived I could hear something rattling around and when I plugged it in, it started smoking. I was refunded, and rather than paying for the return shipping, the seller said I could just keep it.
If anyone would like to take a crack at it for repair or parts I would be willing to ship it at your cost. I could open it up and take some pictures if that would help anyone decide.
If you're in give me a number 1-100.
I recently bought a Parasound HCA1200 on Ebay. When it arrived I could hear something rattling around and when I plugged it in, it started smoking. I was refunded, and rather than paying for the return shipping, the seller said I could just keep it.
If anyone would like to take a crack at it for repair or parts I would be willing to ship it at your cost. I could open it up and take some pictures if that would help anyone decide.
If you're in give me a number 1-100.
Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
Comments
-
Open it and lets see some pictures.
-
Will do this eveningPro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
-
In in with a #52.
Please send pics via PM. I have a couple of things I need to get up on the bench. Always up for a challenge....and this sounds like a BIG one.Post edited by WLDock on2.2 Office Setup | LG 29UB55 21:9 UltraWide | HP Probook 630 G8 | Dell Latitude | Cabasse Stream Amp 100 | Boston Acoustics VS 240 | AUDIORAX Desk Stands | Mirage Omni S8 sub1 | Mirage Omni S8 Sub2 -
@WLDock I would suggest editing out your email and send in a PM....
-
I mean if you got it for free, I would hit up Big Sky audio and get an estimate. For the cost that they normally go for used you might be able to get one that's been refurbished by folks that know what they are doing...Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
Game Room 5.1.4: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra
Bedroom 2.1Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer -
Fixed,ken brydson wrote: »@WLDock I would suggest editing out your email and send in a PM....
Thanks Ken
Here's the Schematic: http://webpages.charter.net/ajbertelson/diyaudio/HCA1200II.pdf
Post edited by WLDock on2.2 Office Setup | LG 29UB55 21:9 UltraWide | HP Probook 630 G8 | Dell Latitude | Cabasse Stream Amp 100 | Boston Acoustics VS 240 | AUDIORAX Desk Stands | Mirage Omni S8 sub1 | Mirage Omni S8 Sub2 -
I've got a bench & some time.
Thanks & in with 21 -
Where are you at? And how much does it weigh? I would kinda like to get a shipping estimate. I’ll go in with number 75.
-
Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
Let me know if you want a closer up shot of anythingPro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
-
Wow looks like torrid slipped and slammed into everything in front of it. It that correct? Any broken boards? To be honest it is hard to tell, something just looks cantiwhompus in the middle there....
-
I mean if you got it for free, I would hit up Big Sky audio and get an estimate. For the cost that they normally go for used you might be able to get one that's been refurbished by folks that know what they are doing...
Thanks for the heads up. That does sound like a good idea, but I'm going to take my time on my next purchase, I'm sure I'll end up with something solid. Hopefully someone here can fix this up for cheap and either use it or make a nice little profit.Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
Wow looks like torrid slipped and slammed into everything in front of it. It that correct? Any broken boards? To be honest it is hard to tell, something just looks cantiwhompus in the middle there....
There were some black pieces that fell out of the grill...
Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
Personally I think they knew it was broke when they sent it. I'm sure they insured the shipment...Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
-
DO you have any idea where the black peices came from? I looked for somewhere in the pictures that it would have come from, but I didn’t see anything. Are they plastic or paper or something else? They look like paper to me, but I can’t tell.
Is it the mark ii or the original? -
It's a semi rigid plastic. Seems like the same material that's around the power supplies in this picture, but when I looked last night I didn't notice any issues with any of them.
It's the original.
Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
Ok, good to know.
-
Top right power cap by where the heat sink was dislodged. This is likely also to be the cause of the magic smoke...The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
Ha, now that I look at the picture, it sure does look like there's some missing from the middle supply on the left. I'll take another look when I get home.Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
-
Is the front crooked? It looks kinda sideways in the picture.
Also, could you show pictures of the front panel and rear panel? -
mlistens03 wrote: »Where are you at? And how much does it weigh? I would kinda like to get a shipping estimate. I’ll go in with number 75.
Oh yeah, I'm at zip code 24540 and according to the spec sheet it weighs 38lb.Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
OK, thanks!
-
Lol when I first got a shipping estimate it had auto selected ups air travel early next day, and it was like almost $350. I was very worried for a second.
-
mlistens03 wrote: »Is the front crooked? It looks kinda sideways in the picture.
Also, could you show pictures of the front panel and rear panel?
I think that was due to the angle I took the picture from.
I did take some of the panels...
Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra -
Goodness, what happened to the knobs on the front?
-
Water damage? The hold down plate on the toroidal is rusty too. This does not look like a job for the casual tinkerer.
-
I'll have to take a closer look at the knobs. I did not remember them looking quite like the picture shows. But yeah, there does appear to be some signs of water.Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
-
This might be a little bigger of a job than I first thought... but I will do my best if I get it, and if my best is not good enough then I will... uh... probably get it fixed professionally or something
-
This thing looks like it got wet and or sat out in the garage or a damp basement for some years.
Here are some photos of some others: http://www.ukaudiomart.com/details/649391951-parasound-hca1200-power-amp-205wpc/images/1695769/
http://www.usaudiomart.com/details/649100007-parasound_hca1200_high_current_power_amplifier_excellent_condition_200_wpc/images/677195/
http://www.hifishock.org/gallery/electronics/parasound/power-amplifier/
2.2 Office Setup | LG 29UB55 21:9 UltraWide | HP Probook 630 G8 | Dell Latitude | Cabasse Stream Amp 100 | Boston Acoustics VS 240 | AUDIORAX Desk Stands | Mirage Omni S8 sub1 | Mirage Omni S8 Sub2 -
I knew something was wrong with the color of the PCB!
Just junk it @dr1978This thing looks like it got wet and or sat out in the garage or a damp basement for some years.
Here are some photos of some others: http://www.ukaudiomart.com/details/649391951-parasound-hca1200-power-amp-205wpc/images/1695769/
http://www.usaudiomart.com/details/649100007-parasound_hca1200_high_current_power_amplifier_excellent_condition_200_wpc/images/677195/
http://www.hifishock.org/gallery/electronics/parasound/power-amplifier/
