-
Re: Billet RD-0194/8 tweeter plate design.
Mod or die. B) I'd say do the full-monty on the 4a's, step-by-step and judge for yourself. A must for those 4A's would be the masking tape mod on those dusty domes.3 · -
Re: Must try MOD - Foam inside the stamped steel baskets - YES!
Shrinkflation is real. :D In other news, did a test run. I took a 3/8" wide wood chisel to an MW that had a torn surround and badly creased cone. About every 1/4 turn of the perimeter I put a dr…2 · -
Re: Billet RD-0194/8 tweeter plate design.
What a vanilla welcome, dumped your post right off the bat... SMH. You're in good hands here, looking forward to your build. If there is not an inner brace to the bottom PR cabinet area, I'd put that…2 · -
Re: Off Topic
Decisions...1 · -
Re: RTiA 6.5" driver Phase Plugs
1 single drop wintergreen oil to capful olive oil is the sweet spot for fixing these dried out surrounds...2 ·
