skrol

  • Re: Monitor 5B Update

    skrolskrol
    They have a 1.5 inches clearance. Damping material applied to the PRs Magnets glued and damping material applied to the MWs XO's mounted All together again. Radiohead sounds magical. Now time fo…
    ·

  • Re: Monitor 5B Update

    skrolskrol
    I took the polyswitches out, replacing them with a jumper. Since the resistors were in series with the polyswitches, I replaced the 2.0 ohm resistors with 2.7ohms to compensate.
    ·

  • Re: Monitor 5B Update

    skrolskrol
    I believe the crossovers are done. I went with the PX 15uF + 18Uf to replace the 34uF, CSA for the 12uF and Mundorf 2.7 ohm 10 watt resistors. I found one of the 34uF were reading 39uF but worse, one…
    ·

  • Mincom 8300A-W Flutter Meter

    skrolskrol
    So my dad found a 3M Mincom 8300A-W flutter meter and gave it to me about 20 years ago. It has been sitting in my basement and I decided to pull it out to play around with it. I cleaned the switches,…
    ·

  • Re: Monitor 5B Update

    skrolskrol
    Temporarily installed. In the burn-in chamber as to not annoy my wife.
    ·
Avatar