RT5 driver issue/cost?
FAU5TU5
Posts: 5
Am using some older RT5s as rears for HT, one is having a strange issue where the main driver has a little scratchy rattle. I took it out to see if there was some separation somewhere or something silly like that, but everywhere visible is attached. Surrounds look fine, etc. But you can feel the actual area that is causing the problem.
If you (and please forgive the layman abuse of terminology and phrasings) "thump on" the cone gently 75% of it comes back with a nice taut tone like gently thumping a drum, "boomp, boomp".. 25% is flat. "blat" ( told you you have to forgive LOL)
Also if you manually "massage" the cone/driver throw or travel, its smooth everywhere except that same dead area.. there it almost feels "rusty" along the travel,. so it like light sandpaper internally.. and that scraping sound is exactly the sound that comes out of it at low volumes.
So I dont know if there is a possibility of rust, or of something else causing this, or if it is something completely different.
Either way, if there is an easy fix, I'd love to hear it. Or if a replacement of the RT5 main driver is worthwhile to replace how much is it and how do I get it.
I'm obviously not married to these as they are the lowest end Polks I own.. But they work great for rears matching RT7s and LS50s etc.
(By the way, after massaging that little scratchy travel area, the problem greatly decreased but is still there from time to time.
Please,... enlighten me.
If you (and please forgive the layman abuse of terminology and phrasings) "thump on" the cone gently 75% of it comes back with a nice taut tone like gently thumping a drum, "boomp, boomp".. 25% is flat. "blat" ( told you you have to forgive LOL)
Also if you manually "massage" the cone/driver throw or travel, its smooth everywhere except that same dead area.. there it almost feels "rusty" along the travel,. so it like light sandpaper internally.. and that scraping sound is exactly the sound that comes out of it at low volumes.
So I dont know if there is a possibility of rust, or of something else causing this, or if it is something completely different.
Either way, if there is an easy fix, I'd love to hear it. Or if a replacement of the RT5 main driver is worthwhile to replace how much is it and how do I get it.
I'm obviously not married to these as they are the lowest end Polks I own.. But they work great for rears matching RT7s and LS50s etc.
(By the way, after massaging that little scratchy travel area, the problem greatly decreased but is still there from time to time.
Please,... enlighten me.
Post edited by FAU5TU5 on
Comments
-
surprised no one chimed in here,
driver is definitly shot. it happens. might have been playing too loudly at some point, maybe the amp clipped to a degree, but if your pushing on the driver and feel that "rusty" feeling, thats definitly a problem, with no fix that I know of except get a new driver.
might want to give Polk Customer service a call, they still carry old drivers, have no idea of the cost but tell them your a club polk member, you get a discount.
as to wether it is worth it, thats a harder question to answer....i know some of the guys here have some regard for the old RT series.Living Room 2 Channel -
Wiim Ultra. Jolida CD player. Fiio k11 R2R DAC, XTZ as300 Edge amp. Focal Cobalt 826 towers,
Upstairs 2 Channel Rig -
Classe Audio 5 Preamp, DIY1200as2 Icepower Amp x 2, Wiim pro streamer and Topping E70 Velvet DAC, California Audio Labs DX1 CD player, Polk LSi15's with MM840 woofer upgrade.
Studio Rig - Scarlett 18i20(Gen3) DAW, Schitt Saga 2 preamp, Topping a90 headphone amp, Mac Mini, Audiophonics Hypex NC252m amp, Polk r200's
