EQ setting from HT to 2 channel

Options
brian2469
brian2469 Posts: 7
edited June 2006 in 2 Channel Audio
I have an onkyo 803 ht reciever with rti12's for fronts powered by 2 audiosource amp 300's, (470watts each). For HT I use my pb10 sub. When I did my original set up with the mic, it set the woofers in the rti's to -6dbs and eq eq settings to 200hz. This sounds great for HT, but when I listen to music I would rather not use the sub instead the full range of the rti 12's. Is there an easy way to do this. I know how to change to manual EQ settings but I wouldn't know where to set all the different freq's. Any suggestions?
Brian
Onkyo 803 reciever
RTI-12's w/audiosource amp 300 x 2
CSI-5 w/audiosource amp 200
TC265i's w/audiosource amp 200 (surrounds)
RC80i's (rears)
SVS pb-10 sub
Post edited by brian2469 on
· Share on FacebookShare on Twitter

Comments

  • organ
    organ Posts: 4,969
    edited June 2006
    Options
    Hi Brian,
    Welcome to Club Polk!:).

    I used to have an Onkyo receiver and the easiest way is to get to the bass management settings and simply set your "subwoofer" to "off". This should send full range signal to your RTi12's.

    You have a great system btw.
    · Share on FacebookShare on Twitter
  • brian2469
    brian2469 Posts: 7
    edited June 2006
    Options
    Thanks for the reply Organ, Question?
    By setting the sub to off, will my eq setting be correct for music?
    Onkyo 803 reciever
    RTI-12's w/audiosource amp 300 x 2
    CSI-5 w/audiosource amp 200
    TC265i's w/audiosource amp 200 (surrounds)
    RC80i's (rears)
    SVS pb-10 sub
    · Share on FacebookShare on Twitter
  • organ
    organ Posts: 4,969
    edited June 2006
    Options
    When you set the sub to off, the eq settings should be bypassed. Or if you have "direct stereo" feature, it should be pretty much the same thing.
    · Share on FacebookShare on Twitter
  • brian2469
    brian2469 Posts: 7
    edited June 2006
    Options
    Thanks alot Organ, Brian
    Onkyo 803 reciever
    RTI-12's w/audiosource amp 300 x 2
    CSI-5 w/audiosource amp 200
    TC265i's w/audiosource amp 200 (surrounds)
    RC80i's (rears)
    SVS pb-10 sub
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited June 2006
    Options
    most Onks have a setting called Direct, this will automatically by-pass the units sub output as well as other dsp, its generally held as the best way to listen to music with an Onk receiver. All information will be output through the left/right front rca jacks.

    RT1
    · Share on FacebookShare on Twitter