SERENE STABILISER

Options
Toolfan66
Toolfan66
in 2 Channel Audio
https://stackaudio.co.uk/serene-stabiliser/?utm_source=fb&utm_medium=paid_social&utm_campaign=AUVA+SW+-+US+Prospecting+-+R1&utm_content=SERENE+Stabaliser&utm_term=US+Broad+-+Purchase+-+AUVA+SW&fbclid=IwY2xjawUKPOtwZG9mA2V4dG4DYWVtATAAYWRpZAGrN7v0Ekdic3J0YwZhcHBfaWQPNDA5OTYyNjIzMDg1NjA5AAEeAdl5A6UG9I31h3ctjUU8cFb1NSTNEEaDZqsUOi9XiC4bjOREDQ9Y1jU6LmA_aem_yWZ7VNSHXzhJn0XuNSkdsA&utm_id=120250618266330770
· Share on Facebook

Comments

  • Toolfan66
    Toolfan66
    edited September 6
    Options
    Any one seen this? Not sure how it would be any better than a clamp.

    The mat looks interesting as well.
    · Share on Facebook
  • pitdogg2
    pitdogg2
    Options
    Looks familiar....

    😉
    · Share on Facebook
  • xschop
    xschop
    Options
    Build an oil-filled one.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • SCompRacer
    SCompRacer
    edited 12:11AM
    Options
    The mat does looks interesting.

    I've tried a few different mats on my Lenco idler drive. On the Lenco, a narrow idler drives the bottom of the heavy alloy platter, not the inner edge. Mine has a larger custom, no leak stainless platter bearing and aftermarket idler. The best mat so far has been the Boston Audio Mat-1, 3mm thick graphite acquired in 2008 or 9. It's still in use. Later they offered a Mat-2, 5mm thick. Lenco L75's were originally supplied with a 4mm thick rubber mat.

    Of interest, Tom Fletcher of Nottingham Analogue turntables used a 1" thick graphite matt on their high-end Dais (early 70's-80) and later Hyperspace, AnnaLog turntables. They offered that mat as a separate upgrade for their other tables, ~ $1600 retail IIRC which included the thick graphite element, spindle extension, and armboard spacers.
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook