LSiM 705

fontentgenie5
fontentgenie5 Posts: 3
in Speakers
What could be the issue if my 705 'passes the battery test for response, but no sound from my a functioning avr, where only one speaker works.
· Share on FacebookShare on Twitter

Answers

  • pitdogg2
    pitdogg2 Posts: 27,503
    Have you ran through the AVR menu to double check everything?
    · Share on FacebookShare on Twitter
  • fontentgenie5
    fontentgenie5 Posts: 3
    Thank you for your help 🙏. Didn't have to, because everything had been just great until I disconnected it. It played again for a while and when I tried to connect it to a tube integrated amplifier, nothing went my way . Again thank you for your support
    · Share on FacebookShare on Twitter
  • treitz3
    treitz3 Posts: 20,197
    If only one speaker works, swap the speaker leads from the speaker that does work to the channel that doesn't, and vice versa. If the issue follows the speaker, then you have a speaker issue. If the same thing happens, you have an AVR issue. This will be the same, regardless of whether you use the AVR or the tubed integrated.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on FacebookShare on Twitter
  • fontentgenie5
    fontentgenie5 Posts: 3
    I appreciate you. Thank you .
    · Share on FacebookShare on Twitter