Help With Wiring Of The SDA CRS That Has The Two MW6510 And One SL2000 Tweeter

Options
13»

Answers

  • F1nut
    F1nut Posts: 52,406
    Options
    Pin/blade cable.
    https://www.ebay.com/itm/Interconnect-Cable-for-Polk-SDA-Speakers-PIN-Blade-Connector-Black-16ga-AWG-NEW-/166855963593?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
    · Share on Facebook
  • Benjisan
    Benjisan Posts: 64
    Options
    F1nut wrote: »
    ordered the replacement film capacitors and resistors from Digi-key.
    Ummmm...no!

    Why?

    The ones I ordered are audio quality and are just about the same size the OEM's as there's not a lot room for larger caps like Solens or Sonicaps for the crossover board.

    Help me out here if I'm wrong as I can still cancel my order.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    edited July 2024
    Options
    Benjisan wrote: »
    F1nut wrote: »
    ordered the replacement film capacitors and resistors from Digi-key.
    Ummmm...no!

    Why?

    The ones I ordered are audio quality and are just about the same size the OEM's as there's not a lot room for larger caps like Solens or Sonicaps for the crossover board.

    Help me out here if I'm wrong as I can still cancel my order.

    What brand and models did you order? Digi-key isn't known for quality audio grade components.
    · Share on Facebook
  • Benjisan
    Benjisan Posts: 64
    Options
    F1nut wrote: »
    Benjisan wrote: »
    F1nut wrote: »
    ordered the replacement film capacitors and resistors from Digi-key.
    Ummmm...no!

    Why?

    The ones I ordered are audio quality and are just about the same size the OEM's as there's not a lot room for larger caps like Solens or Sonicaps for the crossover board.

    Help me out here if I'm wrong as I can still cancel my order.

    What brand and models did you order? Digi-key isn't known for quality audio grade components.

    I cancelled the order.

    I found a few threads here that people had used Parts Express and Parts Connexion.

    Will spend some time tomorrow going through them and put an order together.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Try Clarity CSA or Jantzen Superior Z for caps. Vishay-Mills for resistors.
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • Benjisan
    Benjisan Posts: 64
    Options
    Thanks guys.

    Madissound is where I'm putting a order in with. They are USA based and have a great deal of everything I will need from multiple manufactures to do the upgrade.



    · Share on Facebook
  • Benjisan
    Benjisan Posts: 64
    Options
    Toolfan66 wrote: »
    Driver swap is complete, 6511's should see you by Saturday..

    I can not thank you enough Larry in making this a very pleasant interaction.

    And that goes for you too Boston1450.

    All you guys here on the Polk forum ROCK!!

    · Share on Facebook
  • Benjisan
    Benjisan Posts: 64
    Options
    Toolfan66 wrote: »
    Driver swap is complete, 6511's should see you by Saturday..

    Hi Larry,
    The drivers arrived safe and sound.

    Thanks again.
    · Share on Facebook