Monitor 11 crossover question
Options
gjmess
Posts: 15
Just picked up a pair of monitor 11s . They are in bad shape but a good winter project. Strip vinyl and re-veneer...among other things. Would like to replace the binding posts...just wondering how to pull the crossover apart...thought I would ask before I break something.
Answers
-
XO should be on the binding post cup. Pull out the cup after you remove and document the wires on the midwoofers. You'll need to remove the XO from the stand-offs on the cup to get to the binding post.
Report back once you see all the glue we'll go from there. -
So I removed the crossover from the spools....now I have two spools of inductors but still no access to the binding posts.
-
-
I think you're going to have to push the center pins back on those expandable white nylon rivets and then you will gain access to the binding posts.George / NJ
Polk 7B main speakers, std. mods+ (1979, orig owner)
Martin Logan Dynamo sub w/6ft 14awg Power Cord
Crown D150 amp
Logitech Squeezebox Touch Streamer w/EDO applet
iFi nano iDSD DAC
iPurifier3
iDefender w/ iPower PS
Custom Steve Wilson 1m UPOCC Interconnect
iFi Mercury 0.5m OFHC continuous cast copper USB cable
Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
Custom Vibration Isolation Speaker Stands and Sub Platform -
That's what I was thinking....easier said than done. Off we go.....
-
FYI....yep. What a pain. Whose idea was that?
