Polk RT7 ports
Options
can anyone tell me what the port dimensions are for the RT7 bookshelf?
thanks
thanks
Comments
-
I have an old pair of cabinets, what dimensions specifically do you need for the ports?
-
i need the diameter and the length of the ports. i have the drivers and crossover. i want to build new cabinets for them.
thanks. -
I’ll get the measurements soon
-
thanks much. greatly appreciated!
-
So, the two ports are different lengths.
-
And the outside of the port is fluted as shown in the bottom of this photo
-
The longer port tube measures 7 3/4 inches to flush with front
-
The shorter tube located on left side is 4 1/4 inches from back of cardboard tube to flush with front. Both measurements I provided are approximate.
-
The tubes are approximately 1 3/4” I.D. Pretty hard to measure precisely
-
The cardboard tubes appear to be inserted into the fluted plastic front piece and hot glued together
-
thanks so much dromunds for providing these measurements and pictures. this was the last thing i needed for my new project.
-Mike
