2 POLK PSW505 SUBS for the price of 1 SVS = something to think about, or laugh at?

Options
stonepa
stonepa Posts: 5
I'm in a interesting bind. Currently with the POLK promotions I can purchase (2) BRAND new POLK PSW505's for $589 shipped. My original thought was getting (1) SVS PB12-ISD subwoofer for $599. Although, since SVS does not offer free shipping this would actually make the total cost around $660ish for the SVS.

With that given, how would the concept of just going with the (2) Polk's, which on paper would give me 600 RMS watts, vrs 320 RMS with the SVS. Given how highly touted the SVS products are, would it be a bold claim that (2) POLK PSW505's could match and perhaps exceed the overall experience of the (1) SVS PB12-ISD? My theater room is also very large, 25 Feet wide and 30 deep, I have a 106" Fixed Screen. I'm trying to keep the cost somewhat down but yet want to really fill things up.

Am I just fooling myself here.. Should I just somehow find another $300 and get the "PB12-ISD/2" for $899? I wish shipping was free

let me know what you think would be highly appreciated as I hope to order soon.

Thanks gang!!!
Post edited by stonepa on

Comments

  • kingtut
    kingtut Posts: 813
    edited January 2005
    Options
    Check w/Polk Thug. He had two 505 and ended up w/ a SVS.
  • AsSiMiLaTeD
    AsSiMiLaTeD Posts: 11,728
    edited January 2005
    Options
    If you do decide to go with the SVS, you could always add another one of those down the road when you got the extra funds.

    Personally, I'd think going with the SVS would be a better idea, buy as much as you can afford.

    How talll is that room? You have 750 square ft, but it's the cubic ft that is really going to determine what you need in terms of a sub...
  • VR3
    VR3 Posts: 29,696
    edited January 2005
    Options
    The SVS will SMASH them - maybe not above 30hz (which will probally still be moderately close) - but below 30hz, it won't even be fair... the Polks will be obliterated...

    And there is alot of stuff below 30 hz in movies, that seperates the Subwoofers From The Monsters
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
    I went from two 505's to two PB10's. I'm guessing that the twin 505's will be 'louder' than the single PB12, but they won't be able to go as deep. I've got a chart somewhere on this forum comparing the 505's vs PB10's, which will help you visualize what I'm talking about.

    Regards,
    PolkThug
  • AsSiMiLaTeD
    AsSiMiLaTeD Posts: 11,728
    edited January 2005
    Options
    Originally posted by PolkThug
    I've got a chart somewhere on this forum comparing the 505's vs PB10's, which will help you visualize what I'm talking about.

    Here you go...

    http://clubpolk.polkaudio.com/forum/showthread.php?s=&threadid=18977&highlight=505
  • Stroonzo
    Stroonzo Posts: 37
    edited January 2005
    Options
    Wait until SVS has one on B stock. They are usually $50 off and are perfect subs too. My SVS was B Stock.

    B Stock Inventory:
    http://svsubwoofers.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=SSL&Category_Code=B-stock
    Onkyo TX-SR501
    Polk Rti38 x 4
    Polk Csi40
    SVS PB1-ISD (aka PB12-ISD)
    -=See It Here=-
    http://www.JConti.Net/HT
  • Stroonzo
    Stroonzo Posts: 37
    edited January 2005
    Options
    Wait until SVS has one on B stock. They are usually $50 off and are perfect subs too. My SVS was B Stock.

    B Stock Inventory:
    http://svsubwoofers.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=SSL&Category_Code=B-stock
    Onkyo TX-SR501
    Polk Rti38 x 4
    Polk Csi40
    SVS PB1-ISD (aka PB12-ISD)
    -=See It Here=-
    http://www.JConti.Net/HT
  • Mjr7531
    Mjr7531 Posts: 856
    edited January 2005
    Options
    stonepa, where do you live? Anywhere near Ohio?
    They are based in Youngstown, Ohio (An hour from Cleveland) and I beleive you can do a pickup,
    Matt
  • Stroonzo
    Stroonzo Posts: 37
    edited January 2005
    Options
    Zero,

    Stroonzo is an Italian (Sicilian dialect perhaps) for Caca or poo. Example: I feel like stroonzo. I have got to stroonzo etc...
    Onkyo TX-SR501
    Polk Rti38 x 4
    Polk Csi40
    SVS PB1-ISD (aka PB12-ISD)
    -=See It Here=-
    http://www.JConti.Net/HT
  • VR3
    VR3 Posts: 29,696
    edited January 2005
    Options
    WAAAAAAAAAAAAAA!!!

    LOL!!!!!!!!!!! SEAN!!! WAAAAAAAAA!!!

    LMAO!!! LOL!!!! OMG!!! WAAAA!!! LOL!!!!

    I thought MY NAME was bad... but yours is much much worse! LOL
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • RuSsMaN
    RuSsMaN Posts: 17,985
    edited January 2005
    Options
    WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service.
  • fireshoes
    fireshoes Posts: 3,167
    edited January 2005
    Options
    Owned.
  • stonepa
    stonepa Posts: 5
    edited January 2005
    Options
    someone please end this thread, its gone to crap

    :(
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
  • stonepa
    stonepa Posts: 5
    edited January 2005
    Options
    Wow great chart..

    Just a quick question, that drop off is quite large... Was the POLK inaudible with that drop-off, say at 25-20 hz or was just hugely weak in power and sound?

    Appears SVS is the true choice with bass below 25 hz, that chart is somewhat depressing for any polk fan

    Thanks
  • okiepolkie
    okiepolkie Posts: 2,258
    edited January 2005
    Options
    Just by looking at the chart, it was still pretty strong at 25 HZ. Less than 60db for a subwoofer is probably closer to inaudible for a subwoofer. If you have a ratshack db meter, listen to sounds at frequences between 50-80 and see if you can live with a subwoofer that is that loud. There is a good bit of sound at 70 db, however it is nice in an HT to go low and loud at the same time.

    This is all IMHO though, so take what you want and leave the rest.

    Zach
    Tschüss
    Zach
  • Stroonzo
    Stroonzo Posts: 37
    edited January 2005
    Options
    Originally posted by PolkThug
    here you go

    Would you happen to have a chart for a pb12-ISD? I am interested to see how that compares to a dual PB10.

    Thanks,
    Jeff
    Onkyo TX-SR501
    Polk Rti38 x 4
    Polk Csi40
    SVS PB1-ISD (aka PB12-ISD)
    -=See It Here=-
    http://www.JConti.Net/HT
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
    Originally posted by stonepa
    Just a quick question, that drop off is quite large... Was the POLK inaudible with that drop-off, say at 25-20 hz or was just hugely weak in power and sound?

    There's still a lot of sound there, just not in comparison.
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
    The PB10's really are remarkable, I had 'car audio friend' over and I played a 120-20Hz sweep followed by a 40-0Hz sweep, and he asked, "Are those 12's or 15's?" :)
  • Stroonzo
    Stroonzo Posts: 37
    edited January 2005
    Options
    I found the response chart for the pb12 on SVS's web site:

    http://www.svsubwoofers.com/images/performancecharts/pb1isd.jpg
    Onkyo TX-SR501
    Polk Rti38 x 4
    Polk Csi40
    SVS PB1-ISD (aka PB12-ISD)
    -=See It Here=-
    http://www.JConti.Net/HT
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
    Originally posted by Zero
    Damn - Polk freakin "pwned" me and I never even realized it. Slick...

    LMAO!
  • Willow
    Willow Posts: 11,339
    edited January 2005
    Options
    I don't know why they call the pb-10 an entry level sub...... it goes low and according to reviews is clean and tight
  • stonepa
    stonepa Posts: 5
    edited January 2005
    Options
    I'm i'm viewing the PB12 chart correctly, and the one POLKTHUG posted, is that suggesting that the PB10 drops off less then the PB12 after 20hz? YIKES!!!
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2005
    Options
    Originally posted by stonepa
    I'm i'm viewing the PB12 chart correctly, and the one POLKTHUG posted, is that suggesting that the PB10 drops off less then the PB12 after 20hz? YIKES!!!

    Yes, but also keep in mind that my chart has "room gain".
    However the PB10 is definitely ground breaking at 19-150Hz +/- 1 db, when tested in the same conditions as the PB12.
  • VR3
    VR3 Posts: 29,696
    edited January 2005
    Options
    The I have the PCi 22-31 (the 25-31 with a free 22hz tune) --

    And it hits strong at 15hz in my room.

    The PB10 is tuned to 18hz, where as the PB 12 is tuned to 22hz - so the PB10 will roll off later...

    You also have to remember Thug has DUAL** PB10s

    deftechsvsgraph.jpg
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • stonepa
    stonepa Posts: 5
    edited January 2005
    Options
    Some great info here , and I think honestly dual PB10's are really a nice way to go with there amazing performance, low footprint, and price. Having two stacked would be nice, but I'd like to have them in different parts of the theater to help BASS the entire theater even more. Since I've started this thread I've found a INFINITY HPS-1000 subwoofer which I'm picking up this week, I'm gonna give it a shot and see how it works. Anyone by chance any feelings on that unit? if things don't work out I might be looking at a dual pb10 option :)

    T