Third times a charm?

Gots a new thing in pieces!

jbixfwd6fsvp.jpg

So far...
qlfb0i8i79aw.jpg

Aaron
Enabler Extraordinaire
«1

Comments

  • heiney9heiney9 Posts: 24,125
    Cool! Keep me in mind if selling eventually becomes an option. I passed on the first 2 offerings. Now I'm on a waiting list.

    Anxious to see the build progress

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass

    Pass Aleph 30 | EE Avant Pre | EE Mini Max Plus DAC | MIT Shotgun S3 | MIT Z P/C's | updated SDA 1C| SQ Box Touch/Welbourne Labs P/S- Tubes add soul!
  • msgmsg Posts: 5,051
    Looks like fun!
    Which model did you go with?
    I disabled signatures.
  • ALL212ALL212 Posts: 1,146
    Silver stereo.

    Blake - I’ll keep you looped in and you’re #1 on the list,

    Another step done.

    uv3ysklp20ab.jpeg
    Aaron
    Enabler Extraordinaire
  • mhardy6647mhardy6647 Posts: 23,572
    pieces.
    are.
    good.

  • mlistens03mlistens03 Posts: 2,647
    mhardy6647 wrote: »
    pieces.
    are.
    good.

    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. :tongue:
    Not Tom or Trey or Jim just Micah
    KEF Q150s, NAD 1155 preamp and 4155 tuner courtesy of DaddyJT, NAD C352 playing power amp, BJC Belden cables, Technics SL3200, Marantz CD6004 courtesy of Clipdat, Salamander Archetype rack, Millenium Falcon :)
    I've always thought the goal of high-end audio was not to have your neighbors bang on the wall and say, 'Turn that darn music down' but to have your neighbors bang on the wall and say, 'Tell your friends to go home and you can practice later this week'.

    Resident Child of Club Polk
  • mhardy6647mhardy6647 Posts: 23,572
    mlistens03 wrote: »
    mhardy6647 wrote: »
    pieces.
    are.
    good.

    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. :tongue:
    You are young, young Jedi. Experience, it will come.

    Yoda Trioda
  • ALL212ALL212 Posts: 1,146
    Lol... Blake... Brock...

    I’m a moron..
    Aaron
    Enabler Extraordinaire
  • ALL212ALL212 Posts: 1,146
    Tonight’s progress. Directions for this are terrible, doable, but terrible.

    d74lte2x2ryr.jpeg
    Aaron
    Enabler Extraordinaire
  • heiney9heiney9 Posts: 24,125
    I knew who you meant. Looking good!

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass

    Pass Aleph 30 | EE Avant Pre | EE Mini Max Plus DAC | MIT Shotgun S3 | MIT Z P/C's | updated SDA 1C| SQ Box Touch/Welbourne Labs P/S- Tubes add soul!
  • mhardy6647mhardy6647 Posts: 23,572
    Directions?! Ever see the Venn diagram describing men and directions?

    There is no intersection.

    ;)
  • ALL212ALL212 Posts: 1,146
    Directions:
    Step 1:
    I don't mind that you have to figure out where the proper resistors go on the board - read schematic, place proper resistors. Insure you have a MM.
    Step 2: build the chassis...what? when done with step 2 you've successfully built the chassis. There is nothing in it but you've built the chassis. If you've mounted the circuit boards you have a chassis with two circuit boards in it but no connections or connectors.
    Step 3: place the connectors - maybe step 2 should go at the end?

    Now realize that the pictures are not of the connectors you have. Wing it.

    Step 4: wiring... "use some wire". ok...I can do that, but how much? Do I have enough?

    I think the major whoops is step 2 - it needs to go later in the build.

    Again - doable...but could be so much better!

    I'm at step 1.5 - realize that step 2 is in the wrong spot and how do I figure out how much wire to use with it disassembled so at assembly I don't come up short or have an extra 10' of wire in here.

    Bitchin' session over...
    Aaron
    Enabler Extraordinaire
  • mlistens03mlistens03 Posts: 2,647
    mhardy6647 wrote: »
    mlistens03 wrote: »
    mhardy6647 wrote: »
    pieces.
    are.
    good.

    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. :tongue:
    You are young, young Jedi. Experience, it will come.

    Yoda Trioda

    HA! Love the Star Wars reference.
    I actually fully disassembled a receiver the other day (an Onkyo TX-V940) down to every single board, and actually put it back together! My skills are increasing!! :wink:
    Not Tom or Trey or Jim just Micah
    KEF Q150s, NAD 1155 preamp and 4155 tuner courtesy of DaddyJT, NAD C352 playing power amp, BJC Belden cables, Technics SL3200, Marantz CD6004 courtesy of Clipdat, Salamander Archetype rack, Millenium Falcon :)
    I've always thought the goal of high-end audio was not to have your neighbors bang on the wall and say, 'Turn that darn music down' but to have your neighbors bang on the wall and say, 'Tell your friends to go home and you can practice later this week'.

    Resident Child of Club Polk
  • pitdogg2pitdogg2 Posts: 14,888
    edited August 2018
    mlistens03 wrote: »
    mhardy6647 wrote: »
    mlistens03 wrote: »
    mhardy6647 wrote: »
    pieces.
    are.
    good.

    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. :tongue:
    You are young, young Jedi. Experience, it will come.

    Yoda Trioda

    HA! Love the Star Wars reference.
    I actually fully disassembled a receiver the other day (an Onkyo TX-V940) down to every single board, and actually put it back together! My skills are increasing!! :wink:

    But does it work???
  • mlistens03mlistens03 Posts: 2,647
    pitdogg2 wrote: »
    mlistens03 wrote: »
    mhardy6647 wrote: »
    mlistens03 wrote: »
    mhardy6647 wrote: »
    pieces.
    are.
    good.

    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. :tongue:
    You are young, young Jedi. Experience, it will come.

    Yoda Trioda

    HA! Love the Star Wars reference.
    I actually fully disassembled a receiver the other day (an Onkyo TX-V940) down to every single board, and actually put it back together! My skills are increasing!! :wink:

    But does it work???

    uh... I-uh... hmm... well... ye-no. :wink:
    But in my defense, it was already broken when I started. The only reason I took it apart was to find something amiss... but, alas, there was nothing to be found.
    Not Tom or Trey or Jim just Micah
    KEF Q150s, NAD 1155 preamp and 4155 tuner courtesy of DaddyJT, NAD C352 playing power amp, BJC Belden cables, Technics SL3200, Marantz CD6004 courtesy of Clipdat, Salamander Archetype rack, Millenium Falcon :)
    I've always thought the goal of high-end audio was not to have your neighbors bang on the wall and say, 'Turn that darn music down' but to have your neighbors bang on the wall and say, 'Tell your friends to go home and you can practice later this week'.

    Resident Child of Club Polk
  • SCompRacerSCompRacer Posts: 7,194
    ALL212 wrote: »
    Tonight’s progress. Directions for this are terrible, doable, but terrible.


    Nice work but you need a refresher course on symmetry. Phillips screw heads should all be clocked in the same position. :D
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • ALL212ALL212 Posts: 1,146
    I had to throw the whole thing away... I couldn't get all the screw heads clocked right.

    Finis… The directions just plain suck but it is doable.

    Wire layout just prior to mounting the back panel:
    382igpn6ur5t.jpg

    Cat 5 wire to led, their "speaker connection" wire to power supply, Mogami from inputs and a stripped out Canare wire to the speaker outs.
    ghjiaeu3j57p.jpg

    Back panel completed:
    jojsu1e6jq1i.jpg

    The Back of the back - middle connector does nothing but fill a hole. Use that for balanced in on mono's.
    96xtyo1dm9yv.jpg

    The Front of the front - that switch - does nothing but fill a hole. Power switch is on the back where it should be.
    yrlbr1hhqzbh.jpg

    It plays! Will need to put it on something other than the test rig to see what it can do.






    Aaron
    Enabler Extraordinaire
  • SCompRacerSCompRacer Posts: 7,194
    Kewl! Nice work! I really dig the bat handle switch! We'll have to think of an alternate plug for the front panel switch.

    BTW, nice you see you got some class..... :D
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • heiney9heiney9 Posts: 24,125
    Nice!
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass

    Pass Aleph 30 | EE Avant Pre | EE Mini Max Plus DAC | MIT Shotgun S3 | MIT Z P/C's | updated SDA 1C| SQ Box Touch/Welbourne Labs P/S- Tubes add soul!
  • nooshinjohnnooshinjohn Posts: 21,578
    SCompRacer wrote: »
    Kewl! Nice work! I really dig the bat handle switch! We'll have to think of an alternate plug for the front panel switch.

    BTW, nice you see you got some class..... :D
    How about a power meter with a soft blue glow...
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB700/800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • SCompRacerSCompRacer Posts: 7,194
    How about a power meter with a soft blue glow...

    The answer, right here!
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • mhardy6647mhardy6647 Posts: 23,572
    SCompRacer wrote: »
    Kewl! Nice work! I really dig the bat handle switch! We'll have to think of an alternate plug for the front panel switch.

    BTW, nice you see you got some class..... :D
    Quickly, Robin! The Bat Handle Switch!

    :|
  • ALL212ALL212 Posts: 1,146
    SCompRacer wrote: »
    BTW, nice you see you got some class..... :D

    I thought I got shots to keep me safe from that!
    Aaron
    Enabler Extraordinaire
  • ALL212ALL212 Posts: 1,146
    edited August 2018
    I gave it a real job. Volume on pre @ 3 o’clock

    1n6e6oakk2n2.jpeg
    Aaron
    Enabler Extraordinaire
  • warrenwarren Posts: 665
    Not when its my gear. For me, pieces means that it may never be assembled correctly ever again. You paid your money and took your chances ...
    Some final words,
    "If you keep banging your head against the wall,
    you're going to have headaches."
    Warren
  • SCompRacerSCompRacer Posts: 7,194
    ALL212 wrote: »
    I gave it a real job. Volume on pre @ 3 o’clock


    Sweet jebus, IIRC 88dB sensitivity? What a workout!
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • ALL212ALL212 Posts: 1,146
    And now a bit of crow...kinda.

    Found out the 1.6 build directions had yet to be done and are not yet released. So...you release a build without direction? No wonder I was a bit confused and aggravated.

    That back switch is for flipping between balanced and not balanced. Since I am not balanced and don't intend to be balanced it stays.

    The switch of the front is, indeed, the power switch on a normal build. I am also not normal so it stays as is, unused.

    BAJEEZUS!!!

    On the other hand - this thing is nice. The Carvers have its temp up a bit but nothing has caught fire yet. I've been listening for a couple of hours and no fatigue and no bitchin.
    Aaron
    Enabler Extraordinaire
  • SCompRacerSCompRacer Posts: 7,194
    knt10qpk522c.jpg
    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • mhardy6647mhardy6647 Posts: 23,572
    SCompRacer wrote: »
    knt10qpk522c.jpg

    so, so close...

    ccworbllg3gi.png
  • ALL212ALL212 Posts: 1,146
    What is really ironic is that, other than wiring and upgraded caps, I intended to build this stock.

    Oops . :#
    Aaron
    Enabler Extraordinaire
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!