HT Receiver Recommendation?

dpowell
dpowell Posts: 3,067
in Electronics
I have been a satisfied (from a SQ) Pioneer Elite owner for the past 8 years or so starting out with a 92-txh and then moving to my current SC-67 (which I've had just over 3.5 years. Last night the SC-67 displayed the dreaded UE22 error that units from 2011 and 2012 are apparently prone to. I now have a $2,000 boat anchor in the rack. Having also had to have a custom HDMI board repair done to the 92-txh receiver, I'm seriously considering leaving the Pioneer brand for good. Looking for ideas on a next move. Some things I'm considering:

I don't need Class D amps in a receiver since I use the Sunfire to drive the L/R/C but I do need amplification for the 4 rear channels (and possibly another 4 Atmos channels in the future). I do plan to install Atmos at some point and already have an additional 2 in-ceiling speakers ready to go.

I have dual subs and Pioneer never supported room EQ for a dual sub configuration
____________________________________________________________

polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
· Share on FacebookShare on Twitter

Comments

  • EndersShadow
    EndersShadow Posts: 17,590
    Anthem MRX
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on FacebookShare on Twitter
  • dolbyd
    dolbyd Posts: 430
    I was a Pioneer Elite buyer for 25 years. 9 receivers.
    Since the Onkyo merger I have not been happy with their products, And let's not even get started about how they dropped the ball on Blu-ray/UHD.

    I am currently running a Pioneer elite SC87 with 4 ATMOS in ceilings in my family room. It works but I have not been happy with it as far as control.
    I recently upgraded to Marantz in the master bedroom
    and couldn't be happier.

    My plan is to buy the Marantz 7704 when it drops this fall.
    I would look at that or possibly the new 7012 receiver. I think that would match well with your Sunfire amp. Also the Sub EQ will work great with your dual subs.
    Main room- RTiA9 x4, CSiA6, in ceiling Atmos RT-70 x4, SVS PC 4000 x2, Marantz 8805A, OPPO 203, Emotiva DR3 G3, Emotiva XPA-2 G3, Emotiva XPA-5 G3, Emotiva X300, Sony 75" 940E, Panasonic Plasma VT50, PS Audio Power Port X2, PS Audio AC-5 x8, AQ Rocket 33 Biwire speaker cables, AQ King Cobra XLR IC, Furman PFi20 W/Cullen cable, SoildSteel S4-4 rack, Gik room treatments

    Office- Legend L600, in ceiling Polk RC80i, Marantz 7704, OPPO 203, Pioneer Elite PDF-59 CD, PSA Stellar 300, Sony 55" 800B, Gik room treatment

    Master BR- Signature ES60, Signature S35 Center, Signature S15 Dolby Height, LSI700 in ceiling, SVS-SB4000, Marantz 5012, Emotiva XPA5 G2, OPPO 203, Pioneer DVL-919 Laser Disc, Sony 55" OLED

    Patio- SDI Atrium8 x3, Emotiva A-100 amps x3
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,067
    Thanks for the input. There may be hope yet for the receiver. I called Pioneer this morning and they have referred me to a specific program they have in place for addressing this issue, even when the unit is out of warranty. Will post results when I know more.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • teamjhertz
    teamjhertz Posts: 361
    I used the program a couple of times.

    There was no cost and the tuen around was quick.

    Good luck
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,067
    Glad to hear it!
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • Dmega
    Dmega Posts: 83
    Anthem mrx
    Speakers: Polk - Front RtiA9 - Center Csi6 - Surrounds RtiA1 - Heights Sc60 - Sub Psw125 +SVS PB2000
    Power: Anthem MRX1120 11 ch. Atmos/dtsx receiver
    TV: Vizio m70c3 4k led TV
    Player: Philips bdp7501 uhd player
    · Share on FacebookShare on Twitter
  • deronb1
    deronb1 Posts: 5,021
    Anthem does have the best room correction going.
    · Share on FacebookShare on Twitter
  • gce
    gce Posts: 2,158
    I've moved up the ladder from Yamaha to Marantz and now I have an Anthem. Anthem for me was a good choice. Not that threes anything wrong with Yamaha or Marantz. Maybe it's the room correct[on, but the Anthem sounds the best to me.
    Anaheim Hills CA,
    HT 5.1: Anthem MRX 720 / BDP-Denon DBT1713UD / Polkaudio LSiM703 / W4S mAmp's / Polkaudio LSiM706c / Polkaudio LSiM702F/X's / SVS PC12-NSD / Panasonic TC P55VT30

    2 Channel: Rogue RP-5 / WireWorld Electra power cord / Marantz TT-15S1/ Ortofon - Quintet Black MC / Marantz NA8005 DAC / W4S mAmp's / Synology DS 216+ll-4TB / Polkaudio LSiM703
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,383
    edited September 2017
    ToTL Yamaha Aventage is where I go next, I think... the CXa-5100 and a separate amp.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • motorhead43026
    motorhead43026 Posts: 3,897
    edited September 2017
    I agree, Anthem just for the sound and ARC.

    Post edited by motorhead43026 on
    The best way to predict the future is to invent it.

    It is imperative that we recognize that an opinion is not a fact.
    · Share on FacebookShare on Twitter
  • mdaudioguy
    mdaudioguy Posts: 5,165
    nooshinjohn wrote: »
    ToTL Yamaha Aventage is where I go next, I think... the CXa-5100 and a separate amp.

    Oooh, that looks nice! Could be my next step too, and I wasn't even thinking about it until you had to go and post that!
    · Share on FacebookShare on Twitter
  • jeremymarcinko
    jeremymarcinko Posts: 3,785
    +1 on the Yamaha AVENTAGE
    Oh, Listen here mister. We got no way of understandin' this world. But we got as much sense of this bird flyin in the sky. Now there is a lot that bird don't know, but it don't change the fact that the world is happening to him all the same. What I am tryin to say is, is that the course of your life, well its changing, and you don't even see it- Forest Bondurant
    · Share on FacebookShare on Twitter
  • rpf65
    rpf65 Posts: 2,127
    If your using the AVR as a pre/pro, i would also go Yamaha. They build a lot of bells and whistles geared towards HT into their Aventage line, and room correction is pretty good.

    As far as power to drive your surrounds, just about every manufacturer's higher end units should be capable, so I wouldn't really worry about that side of the equation.

    · Share on FacebookShare on Twitter
  • mrloren
    mrloren Posts: 2,461
    I like my Marantz, Audyssey can be a pain to get dialed in but one completely done it is rather nice.

    Sign up for Fry's Promo code and the RX-A1070 is $779
    When I was a kid my parents told me to turn it down. Now I'm an adult and my kids tell me to turn it down.
    Family Room:LG QNED80 75", Onkyo RZ50 Emotiva XPA3 GEN3 Oppo BDP-93,Sony UBP-X800BM. Main: Polk LsiM 705Center: Polk LSiM 704CFront High/Rear High In-Ceiling Polk 80F/X RT Surrounds: Polk S15 Sub: HSU VTF3-MK5
    Bed Room; Marantz SR5010, BDP-S270Main: Polk Signature S20Center: Polk Signature S35Rear: Polk R15 Sub: SVS SB2000
    Working Warehouse; Yamaha A-S301, Sony DVP-NS3100ES for disc Plok TSX550T SVS PB2000 Mini tower PC with 400GB of music
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,067
    I will definitely look at Yamaha's if I can't get the Pioneer repaired. The 1070 only supports two channels of Atmos so I will have to look at higher end models.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,383
    dpowell wrote: »
    I will definitely look at Yamaha's if I can't get the Pioneer repaired. The 1070 only supports two channels of Atmos so I will have to look at higher end models.

    Seriously look at the CX-a5100. Let's you keep or upgrade amplification, and unless they come up with a format that lets you become the star of the film instead of just watch, it should be pretty much all you could ever need from an HT processor.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • mrloren
    mrloren Posts: 2,461
    Hmm,

    Maybe a Denon https://www.amazon.com/gp/product/B01KZRPNIQ/ref=s9u_simh_gw_i1?ie=UTF8&fpl=fresh&pd_rd_i=B01KZRPNIQ&pd_rd_r=QV3H48HCF6J5M68WRE21&pd_rd_w=fCwba&pd_rd_wg=8p6N3&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=VSMSAJ10FA8D9R5FGVTZ&pf_rd_t=36701&pf_rd_p=1dd2ffc3-992f-4bde-81b0-de270e0ead5a&pf_rd_i=desktop
    When I was a kid my parents told me to turn it down. Now I'm an adult and my kids tell me to turn it down.
    Family Room:LG QNED80 75", Onkyo RZ50 Emotiva XPA3 GEN3 Oppo BDP-93,Sony UBP-X800BM. Main: Polk LsiM 705Center: Polk LSiM 704CFront High/Rear High In-Ceiling Polk 80F/X RT Surrounds: Polk S15 Sub: HSU VTF3-MK5
    Bed Room; Marantz SR5010, BDP-S270Main: Polk Signature S20Center: Polk Signature S35Rear: Polk R15 Sub: SVS SB2000
    Working Warehouse; Yamaha A-S301, Sony DVP-NS3100ES for disc Plok TSX550T SVS PB2000 Mini tower PC with 400GB of music
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,067
    It's been a while since I posted this and thought I'd update the thread. I contacted Pioneer and told the CS rep the error code. He groaned and said, "oh that error" then quickly connected me with their repair department. Sent them two pics of the back (SN and MFR date) and they confirmed it was covered, no questions asked. Pioneer shipped me a box with packing materials with a prepaid label for shipping the receiver in for repair. The unit arrived back within a week fixed and working perfectly. Extending a warranty to cover an issue nearly 6 years after manufacture date....Zero cost to me.....Now THAT is solid customer service! Kudo's to Pioneer!
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • [Deleted User]
    [Deleted User] Posts: 0
    Hell yeah! I love when a company stands behind their products. Especially since I have a Pioneer myself.
    · Share on FacebookShare on Twitter
  • verb
    verb Posts: 10,176
    Good to know. I have a Pioneer SC-95 for 6 months now. So far so good. Love it!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
    · Share on FacebookShare on Twitter
  • dolbyd
    dolbyd Posts: 430
    Awesome. Glad it worked out.
    Main room- RTiA9 x4, CSiA6, in ceiling Atmos RT-70 x4, SVS PC 4000 x2, Marantz 8805A, OPPO 203, Emotiva DR3 G3, Emotiva XPA-2 G3, Emotiva XPA-5 G3, Emotiva X300, Sony 75" 940E, Panasonic Plasma VT50, PS Audio Power Port X2, PS Audio AC-5 x8, AQ Rocket 33 Biwire speaker cables, AQ King Cobra XLR IC, Furman PFi20 W/Cullen cable, SoildSteel S4-4 rack, Gik room treatments

    Office- Legend L600, in ceiling Polk RC80i, Marantz 7704, OPPO 203, Pioneer Elite PDF-59 CD, PSA Stellar 300, Sony 55" 800B, Gik room treatment

    Master BR- Signature ES60, Signature S35 Center, Signature S15 Dolby Height, LSI700 in ceiling, SVS-SB4000, Marantz 5012, Emotiva XPA5 G2, OPPO 203, Pioneer DVL-919 Laser Disc, Sony 55" OLED

    Patio- SDI Atrium8 x3, Emotiva A-100 amps x3
    · Share on FacebookShare on Twitter