Nice Luxman L430 100w/ch Duo beta integrated amp
geppy1
Posts: 3,076
Nice Luxman L430 100 watt per channel integrated amp from their Revolver line of the early 1980s. Features their Duo beta circut and a nice moving coil/ moving magnet phono stage. Has bass and treble controls with tone defeat, phono straight, 2 tape inputs, tuner, DAD/CD, phono MM/MC ,preamp out and power amp in and can take two sets of speakers. Unit is in very nice shape with one small ding on the right rear corner of the cover. The original power cord has been repaired as I was using a detachable with it. All features and functions work as they should and the faceplate is very nice. Check my feedback. Asking $185 Thanks,keith
Form Integrated amplifier
Effective output 105W+105W (8 ohms, 1kHz, both channel)
THD 0.009% or less (8 ohms-3dB, 20Hz - 20kHz)
Cross modulation distortion 0.009% or less (8 ohms, 60Hz:7kHz=4:1)
Input sensitivity/impedance Phono man month: 2.5mV/50kohm
Phono MC: 100 microvolt/High-Low switching
Tuner, AUX/DAD, Monitor:200mV/40kohm
Main In: 200mV/50kohm
SN ratio (IHF-A) Phono man month: 90dB (input short-circuit, 5mV conversion)
Phono MC: 67dB (input short-circuit, 250-microvolt conversion)
Tuner, AUX/DAD, Monitor, Main In: 110dB
Frequency characteristic Phono: 20Hz-20000Hz?0.3dB
Tuner, AUX/DAD, Monitor, Main In: 10Hz - -100kHz one dB
Tone control ?8dB, a turnover shift type
Puri part output 200mV(Pre Out)
Light filter Subsonic Filter: 30Hz
A high cut-off filter: 7kHz
A low boost + 8dB, 70Hz
Tapes monitor Two lines (Tape-1, Tape-2)
Tapes dubbing 1->2, 2->1
Speaker switchpoint Two lines
Power consumption 220W
Dimensions Width 453x height 135x depth of 425mm
Weight 13.5kg
Form Integrated amplifier
Effective output 105W+105W (8 ohms, 1kHz, both channel)
THD 0.009% or less (8 ohms-3dB, 20Hz - 20kHz)
Cross modulation distortion 0.009% or less (8 ohms, 60Hz:7kHz=4:1)
Input sensitivity/impedance Phono man month: 2.5mV/50kohm
Phono MC: 100 microvolt/High-Low switching
Tuner, AUX/DAD, Monitor:200mV/40kohm
Main In: 200mV/50kohm
SN ratio (IHF-A) Phono man month: 90dB (input short-circuit, 5mV conversion)
Phono MC: 67dB (input short-circuit, 250-microvolt conversion)
Tuner, AUX/DAD, Monitor, Main In: 110dB
Frequency characteristic Phono: 20Hz-20000Hz?0.3dB
Tuner, AUX/DAD, Monitor, Main In: 10Hz - -100kHz one dB
Tone control ?8dB, a turnover shift type
Puri part output 200mV(Pre Out)
Light filter Subsonic Filter: 30Hz
A high cut-off filter: 7kHz
A low boost + 8dB, 70Hz
Tapes monitor Two lines (Tape-1, Tape-2)
Tapes dubbing 1->2, 2->1
Speaker switchpoint Two lines
Power consumption 220W
Dimensions Width 453x height 135x depth of 425mm
Weight 13.5kg
Post edited by geppy1 on
Comments
-
That unit looks quite nice. GLWTS!"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
-
I'm broke, drooling & jealous!!!!, someone needs to pick this up.Monitor 7C's With Tubes
-
Yeah, I may buy this just out of general principle. That's a SOLID unit.CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
-
How about a couple of pics from under the hood?Review Site_ (((AudioPursuit)))
Founder/Publisher Affordable$$Audio 2006-13.
Former Staff Member TONEAudio
2 Ch. System
Amplifiers: Parasound Halo P6 pre, Vista Audio i34, Peachtree amp500, Adcom GFP-565 GFA-535ii, 545ii, 555ii
Digital: SimAudio HAD230 DAC, iMac 20in/Amarra,
Speakers: Paradigm Performa F75, Magnepan .7, Totem Model 1's, ACI Emerald XL, Celestion Si Stands. Totem Dreamcatcher sub
Analog: Technics SL-J2 w/Pickering 3000D, SimAudio LP5.3 phono pre
Cable/Wires: Cardas, AudioArt, Shunyata Venom 3 -
Oh Man! My first intro to hi-fi was this unit driving a pair of Infinitys RS series speakers. Blew me away and I was hooked. Would love to have it, but saving for tweets and a SACD player. GLWTS!
-
I will try and get more pictures.
-
Solid phono pre on that unit for sure
-
-
Wow that's solid. Being broke FTL
GLWS!! -
Mulling it over.............Review Site_ (((AudioPursuit)))
Founder/Publisher Affordable$$Audio 2006-13.
Former Staff Member TONEAudio
2 Ch. System
Amplifiers: Parasound Halo P6 pre, Vista Audio i34, Peachtree amp500, Adcom GFP-565 GFA-535ii, 545ii, 555ii
Digital: SimAudio HAD230 DAC, iMac 20in/Amarra,
Speakers: Paradigm Performa F75, Magnepan .7, Totem Model 1's, ACI Emerald XL, Celestion Si Stands. Totem Dreamcatcher sub
Analog: Technics SL-J2 w/Pickering 3000D, SimAudio LP5.3 phono pre
Cable/Wires: Cardas, AudioArt, Shunyata Venom 3 -
would like to be in line after mark to talk to geppy about thishumpty dumpty was pushed
-
Hell of a deal!Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Source: Rotel CD14MkII CD Player - Speakers: Elac Debut 2.0 B5.2
-
anybody know if this sold, cant get a response from geppy or markmarc,and its not been relisted as sold. Would love to know a little more from geppy, but im a serious buyer if markmarc passes.
Hope all is well with geppy, and if so, would like to know if available.humpty dumpty was pushed -
Hi, Well this sucks. I am sorry to say it has sold. I never heard from markmarc and did anyone send me a private message I missed??
