SDA SRS 2 (1986 Blade Blade Version)
JohnLocke88
Posts: 1,150
Hello everyone.
Looking to sell a set of SDA SRS 2's I picked up about six months ago. I purchased them with the hopes of restoring them with new caps, mortite, RDOs... the works.
Long story short, never got around to doing anything with them and realistically, they're far more speaker than I need given my current living situation.
There are some snags in the grille cloth, and the end caps could probably use a bit of refinishing. All drivers and tweeters work great, all surrounds are good. Interconnect cable included.
Looking to get $400 for these, but I'm definitely open to offers. (Especially if they can be kept "in the family.")
Because of the size of these speakers, this will of course be local pickup / cash only, in central / south orange county, CA.
Pictures should be available by tomorrow evening.
Thanks everyone.
Looking to sell a set of SDA SRS 2's I picked up about six months ago. I purchased them with the hopes of restoring them with new caps, mortite, RDOs... the works.
Long story short, never got around to doing anything with them and realistically, they're far more speaker than I need given my current living situation.
There are some snags in the grille cloth, and the end caps could probably use a bit of refinishing. All drivers and tweeters work great, all surrounds are good. Interconnect cable included.
Looking to get $400 for these, but I'm definitely open to offers. (Especially if they can be kept "in the family.")
Because of the size of these speakers, this will of course be local pickup / cash only, in central / south orange county, CA.
Pictures should be available by tomorrow evening.
Thanks everyone.
Post edited by JohnLocke88 on
Comments
-
Pics please!!! When you get them up!
-
I think you live near Mole'. He buys everything!"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
Benjamin Franklin, February 17th, 1775.
"The day that I have to give up my constitutional rights AND let some dude rub my junk...well, let's just say that it's gonna be a real bad day for the dude trying to rub my junk!!"
messiah, November 23rd, 2010 -
so far away... <sob> ... and I'm pretty sure my friend with the big truck won't be willing to come out there.
I'm seriously considering buying these from you and letting you hang on to them until I can figure out how to come pick them up.Turntable: Empire 208
Arm: Rega 300
Cart: Shelter 501 III
Phono Pre: dsachs consulting
Digital: Marantz SACD 30n
Pre: Conrad Johnson ET3 SE
Amp: Conrad Johnson Premier 350
Cables: Cardas Neutral Reference
Speakers: SDA 2.3TL, heavily modified -
John,
Put me down as first in line!
I'll shoot you a PM. I'm in N. San Diego Co.
Can these be TL modded?____________________________________________________________
polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, McIntosh C2300, Marantz AV7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Sim Audio Moon 380D DAC, EPSON Pro Cinema 6050 -
uh oh...
Did I unknowingly break some sort of courtesy protocol?
-
I think you live near Mole'. He buys everything!
looks like they are taken already. if not LMKmole' -
Can these be TL modded?
Some say yes, and others say no. I have a set of SRS 2's blade/blade and am going to do it to them. Inspiredsports has done a set, and from what I understand it can be done, and gives improvements close to what you get from the SDA 2Btl upgrade. Check out this very informative, and detailed thread by inspiredsports.
http://www.polkaudio.com/forums/showthread.php?t=74946Sunfire Theater Grand IV
Sunfire Cinema Grand Signature
SRS 2.1TL
SDA 2BTL's
CSiA6
FXiA4
FXiA6
SDA 2A's
Monitor 10A's
http://www.douglasconnection.com -
What I don't get is why can it be done to the SRS 2's but not the 1C's?? I know it has to do with the crossover..
-
TOOLFORLIFEFAN wrote: »What I don't get is why can it be done to the SRS 2's but not the 1C's?? I know it has to do with the crossover..
Blade/blade srs2's and 1c's use the same crossover. -
Blade/blade srs2's and 1c's use the same crossover.
The SDA 1B and the SRS 2 blade/blade have the same crossover. From looking at the 1C diagram, they look to be a little different. The SRS 2 Pin/Blade and the SDA 1C appear to be the same. You will find all of them here:
http://www.polkaudio.com/forums/showthread.php?t=55888Sunfire Theater Grand IV
Sunfire Cinema Grand Signature
SRS 2.1TL
SDA 2BTL's
CSiA6
FXiA4
FXiA6
SDA 2A's
Monitor 10A's
http://www.douglasconnection.com -
Have these been sold?
-
If anyone is interested, these are back up for sale. Price is still $400
Dpowell, Leftcoast, mole have priority in that order for expressing interest before.
Pictures up here. (The spots on a few of the pictures are from the camera, not the speakers. There are some "owwies" but those are on the sides.
http://kus049.imgur.com/Q2Q6N -
I'd be interested in buying the badges.....
-
:biggrin: Please line me up accordingly. I'm interested.
-
I'd be interested in buying the badges.....
Ouch. Speakers are a total loss then I guess. I'll part out accordingly. :rolleyes::biggrin: Please line me up accordingly. I'm interested.
Will do. -
These are still for sale @ $400 in Southern Irvine.
I have listed them on CL as well.
Thanks. -
Bump for a stupidly low price on some bitchin speakers. Hello!?!
