Mod companies

pearsall001
pearsall001 Posts: 5,264
edited December 2010 in Electronics
Anyone have 1st hand experience with any of the numerous mod companies out there? If so what feedback can you give. They seem to be all over the place on what they do along with pricing.
Post edited by pearsall001 on
· Share on FacebookShare on Twitter

Comments

  • ben62670
    ben62670 Posts: 15,969
    edited December 2010
    What are you looking to have modded?
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
    · Share on FacebookShare on Twitter
  • Face
    Face Posts: 14,340
    edited December 2010
    I wouldn't use anyone who doesn't tell you exactly what they're changing.
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,264
    edited December 2010
    ben62670 wrote: »
    What are you looking to have modded?

    Possibly my Music Hall DAC. I'm having fun so far with the little I've done to date...replaced the stock op-amps w/ Bursons & swapped out different tubes. Just these two mods have produced fantastic results. I'd like to tackle some other mods myself but I have zero knowledge of electronics. I would probably butcher the damn thing!
    Face wrote: »
    I wouldn't use anyone who doesn't tell you exactly what they're changing.

    I hear you, from reading up on some of the mod companies that seems to be a sticky point. Some are straight forward with what they do & pricing. Others act like it's a military secret as to what they do.
    · Share on FacebookShare on Twitter
  • fbm211
    fbm211 Posts: 1,488
    edited December 2010
    musical design/musical concepts has a great reputation.John will tell you what mods he will perform and even give you an estimated cost.(Its not cheap but its worth it IMO)

    http://www.musicaldesign.com/
    SDA-2BTL with custom IC
    Adcom 565 monoblocks--Monarchy Audio M-10 preamp
    Theta Data Basic Transport--Stello DA100 Signature DAC--Camelot Dragon Pro2 MK III
    Harman Kardon T-55c TT
    DH Labs Q-10 Signature Speaker Cables With Furez silver plated copper bananas
    Revelation Audio Labs Prophecy Cryo-Silver Reference AES/EBU
    Revelation Audio Labs Prophecy Cryo-Silver i2s digital cable
    4 Furutech FP-314Ag with FI-11cu Plugs/FI-11AG IECs--- Power Cords
    DH LABS REVELATIONS ICs-amps
    Revelation Audio Labs Paradise cryo-silver ICs-Source to pre
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,576
    edited December 2010
    Face wrote: »
    I wouldn't use anyone who doesn't tell you exactly what they're changing.

    I agree. The smoke an mirrors BS should be a flag.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,576
    edited December 2010
    fbm211 wrote: »
    musical design/musical concepts has a great reputation.John will tell you what mods he will perform and even give you an estimated cost.(Its not cheap but its worth it IMO)

    http://www.musicaldesign.com/

    Not a fan.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • Jetmaker737
    Jetmaker737 Posts: 1,113
    edited December 2010
    My tuner was modded by Joseph Chow at Audio Horizons. He did a fantastic job. It still boggles my mind the quality of sound I get out of it.
    SystemLuxman L-590AXII Integrated Amplifier|KEF Reference 1 Loudspeakers|PS Audio Directream Jr|Sansui TU-9900 Tuner|TEAC A-6100 RtR|REL T/9X SE Sub
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,264
    edited December 2010
    dorokusai wrote: »
    Not a fan.

    Any particular reason?
    · Share on FacebookShare on Twitter
  • shack
    shack Posts: 11,154
    edited December 2010
    The only one I have used is Matt Anker at sacdmods.com. A quick search indicates his site is no longer active. That's too bad! The guy did awesome work and turned average to good CDPs in excellent CDPs.
    "Just because you’re offended doesn’t mean you’re right." - Ricky Gervais

    "For those who believe, no proof is necessary. For those who don't believe, no proof is possible." - Stuart Chase

    "Consistency requires you to be as ignorant today as you were a year ago." - Bernard Berenson
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,576
    edited December 2010
    shack wrote: »
    The only one I have used is Matt Anker at sacdmods.com. A quick search indicates his site is no longer active. That's too bad! The guy did awesome work and turned average to good CDPs in excellent CDPs.

    Matt did his work in his off time while in college if I'm not mistaken. He was seasonal at best but did very good work.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,576
    edited December 2010
    pearsall001 wrote: »
    Any particular reason?

    I've heard pieces done by them and was not impressed. Simply personal.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • shack
    shack Posts: 11,154
    edited December 2010
    dorokusai wrote: »
    Matt did his work in his off time while in college if I'm not mistaken. He was seasonal at best but did very good work.

    His site used to be very comprehensive with a list of machines he could mod, and the level of mods he would do with specific prices. I don't remember there being "off" times but it has been a year or two since I visited his site, so I could be wrong. Too bad. I have a Sony DVD/SACD player I always intended to send to him to upgrade...but never got around to it. Too late now I guess.
    "Just because you’re offended doesn’t mean you’re right." - Ricky Gervais

    "For those who believe, no proof is necessary. For those who don't believe, no proof is possible." - Stuart Chase

    "Consistency requires you to be as ignorant today as you were a year ago." - Bernard Berenson
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,264
    edited December 2010
    Matt is an engineer at Cessna Aircraft Co. in Wichita, Kansas. I might reach out to him to see if he still dabbles in mods.
    · Share on FacebookShare on Twitter
  • zingo
    zingo Posts: 11,258
    edited December 2010
    Do it yourself, or have a fellow Polkie help you for cash or beer. I've done my own mods, had help, and helped other Polkies, and had fun with a sense of accomplishment the entire time.
    Jake
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,264
    edited December 2010
    zingo wrote: »
    Do it yourself, or have a fellow Polkie help you for cash or beer. I've done my own mods, had help, and helped other Polkies, and had fun with a sense of accomplishment the entire time.

    I actually thought about that. Maybe I'll give give a shout out to see if anyone is interested. It would be especially nice if I could find anyone in my area (South Jersey, Philly). I would like to learn more about the innards of audio gear.
    · Share on FacebookShare on Twitter
  • zingo
    zingo Posts: 11,258
    edited December 2010
    I'm sure someone can help out locally, but you can always email me with questions and I'll try to help as well.
    Jake
    · Share on FacebookShare on Twitter