Good amp for LSi9 2 channel

2»

Comments

  • ls7z06
    ls7z06 Posts: 95
    edited January 2010
    OK. You guys have me blowing my budget. But oh well. Now I am reading about an integrated Krell S 300i. $2500. Here are the specs. I am not even sure which specs are important! Would that be a good match for my LSI9's? If I got that, I would s-can my Onkyo AVR I am using for a pre out. Thoughts on that?

    Specifications:
    Frequency Response: 20 Hz–20 kHz (+0 Db, -0.14 dB)
    Signal/Noise Ratio: “A” Weighted 90 dB
    THD: @ 1kHz <0.04% / @ 20 kHz <0.25%
    Gain: 32.5 dB
    Input Sensitivity: 0.82 VRMS
    Input Impedance:
    47 kOhms Single-Ended
    94 kOhms Balanced
    Output Impedance: 0.15 Ohms
    Power Consumption:
    Idle 20 W
    Max. 1,800 W
    Transformer: 750VA
    Inputs: All with Theater Throughput
    1 Pair Balanced via XLR Connectors
    3 Pair Single-Ended via RCA Connectors
    1 Ipod via 30-Pin Connector
    Outputs:
    Loudspeaker via 5-Standard Binding Posts (Pr)
    Single-Ended Preamp via RCA Connectors (Pr)
    Output Voltage:
    Peak To Peak 138 V
    Output Power:
    8 Ohms @ 150 W
    4 Ohms @ 300 W
    Remote Control
    Handheld Wireless Remote
    12 VDC Trigger Ouput
    12 VDC Trigger Input
    RC-5 Input via 1/8” Stereo Connector
    Dimensions (HWD): 4x17.25x17.5"
    Weight:
    Shipped: 51.0 lbs Unit Only: 43.0 lbs
    · Share on FacebookShare on Twitter
  • Face
    Face Posts: 14,340
    edited January 2010
    You could keep the Onkyo for HT and the integrated for music listening for the best of both worlds.
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
    · Share on FacebookShare on Twitter