Polk Sda's model ID
snow
Posts: 4,358
these appear to be 1C's to me but im not sure any ideas all you gurus? also any idea on value?
REGARDS SNOW
REGARDS SNOW
Well, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all 
Post edited by snow on
Comments
-
They look like mine which are 1C Studio's. If so, between $400 - $600 depending on condition, local, any upgrades, one-owner, etc.Sony 60'' SXRD 1080p
Amp = Carver AV-705THX 5-Channel
Processor = NAD T747
Panasonic BD35 Blu-Ray
Main = SDA-1C Studio with RD0s, spikes, XO rebuild, rings, I/C upgrade
Center=Polk CS10, Surround = Athena Dipoles, Sub= Boston 12HO
Music/Video Streaming = Netgear NEO550
TT = Audio Technica -
1C Studio's. Very nice.
They generally sell in the $350-500 range. I've seen them go for as much as $600 though.The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
Well,, it's unamious they are 1C studios,, buy em,, sonicap/mills/rdo/binding post/spike em/dynamat/moretite, hope I did not forget,,, yep,, bout' 40-80 watts tube power,, you're good to go for 20 years.Let us know how it turns out.:)JC approves....he told me so. (F-1 nut)
-
Did the SDA-1Bs ever come in black? Other than the finish, they are configured like my 1Bs. Mine came with the SL2000 tweeters and the MW6509s.
Jim5.1 System:
TCL R613 55" 4K
Front: SRS-3.1TL
Center: CS400i
Surround: Monitor 10B
PSW10 subwoofer
Onkyo PR-SC886P Pre/Pro
NAD T955 5 channel power amplifier
Technics SL-1710 MK2 turntable
Audio-Technica AT14Sa cartridge
Parasound P3 pre-amp
Oppo BDP-103 Blu-Ray
2014 MacBook Pro 2.8 GHz
2.0 Office System:
Monitor 10A (Peerless)
Outlaw 1050 receiver
Parasound HCA-1000A power amp
MacPro -
I wonder how they would blend in sonically with the 1.2tl's as surrounds if I used the RD0 tweeters? He wants $300.00 for these but I will try and offer him $200.00 if they look and sound good cuz im a cheap bastage and I would have to buy another pair of RD0's

REGARDS SNOWWell, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all
-
Hell,, 300 is a very good price in itself,, 200 and you stole em'. Good luck.JC approves....he told me so. (F-1 nut)
-
dang $300 is a deal...must be 'lot les Pokkie's up there n the Yukon....
$200 is just plain robbery....dammit...;) -
george daniel wrote: »Hell,, 300 is a very good price in itself,, 200 and you stole em'. Good luck.dang $300 is a deal...must be 'lot les Pokkie's up there n the Yukon....
$200 is just plain robbery....dammit...;)
Yup im a thief
but I really dont need these other than I bought a pair of RD0 tweeters the other day in the hopes of finding a pair of CRS's to use as surrounds but these will work as well. The good thing is these are only 85 lbs or so each and about a foot shorter than the 1.2TL's so it will be a breeze hauling these up a couple flights of stairs.
Thanks for the help guys.
REGARDS SNOWWell, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all
-
Just so you know, the 194's don't sound anything like the 198's.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Would I be better off leaving the SL 2000's in these or just not getting these? I havent upgraded the tweeters on my 1.2tl's yet to the 198's.Just so you know, the 194's don't sound anything like the 198's.
Too bad Polk didnt make any mini me 1.2TL's for surrounds
REGARDS SNOWWell, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all
-
Well, neither the SL2000 or the RD0194-1 sound anything like the SL3000 or the RD0198-1. You could always find a pair or CRS+ (pin/blade) or a pair of 2B's (pin/blade) and do the TL upgrade to them, so that you'd have a timbre match.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Ok thanks Jesse. I will pass on these then.Well, neither the SL2000 or the RD0194-1 sound anything like the SL3000 or the RD0198-1. You could always find a pair or CRS+ (pin/blade) or a pair of 2B's (pin/blade) and do the TL upgrade to them, so that you'd have a timbre match.
REGARDS SNOWWell, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all
-
Just thought of another option. One of the RTA xxTL series would work too, but no SDA.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Good Idea this would probally be the best option of them all because I dont I really need the SDA effect while using them in a 5.1 or 7.1 HT manner and not even sure how good they would sound as surrounds being used this way.Just thought of another option. One of the RTA xxTL series would work too, but no SDA.
I just had my hopes up about the 1C's because there are so few vintage Polks that come up for sale local to me. I have only seen 2 other pair of vintage polks for sale here one was a pair of SDA 2B's which I bought and couldndtd stand the sound of and a pair of 5JR's.
REGARDS SNOWWell, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all



