Monitor 10 stands

aloutah
aloutah Posts: 241
edited April 2010 in Wanted (WTB) Classifieds
I recently purchased a pair of monitor 10's. They did not come with the stands. I am looking to purchase a pair of original stands or recommendations of new stands that tilt back and would be a good fit. Thanks
Post edited by aloutah on
· Share on FacebookShare on Twitter

Comments

  • aloutah
    aloutah Posts: 241
    edited April 2010
    I understand that the original polkstands are difficult to come by. Does anyone have any recommendations of a pair of similar stands? Or something that is the same height and angle of the polkstands.
    · Share on FacebookShare on Twitter
  • RCFGuitars
    RCFGuitars Posts: 159
    edited April 2010
    Where are you located? I've got an original pair I may be willing to part with, but I really would not want to go the trouble of shipping them. They are bulky and heavy, so it would probably be to costly to ship them anyway. If you are in the Chicago area, let me know, and perhaps we can work something out.
    Primary System
    Polk Audio SDA SRS 2.3TL (RDO198,Sonicap/Dayton/Mills,CardasCCGR,Mye Spikes,DynamatX,Driver Rings,Ben's IC,Bi-Wired)
    Polk Audio CSiA4 x2 (C)
    Polk Audio FXiA6 (S)
    Polk Audio RTiA3 (RS)
    Polk Audio FXiA4 (FX)
    Epik Sentinel x2
    Yamaha RX-V3900
    Rotel RB-1090
    Rotel RMB-1095
    NAD C565 BEE
    Technics/KAB SL-1210M5G w/ Denon DL-160
    Parasound Halo P7
    OPPO BDP-83
    Panasonic TC-P65V10 65" Plasma
    · Share on FacebookShare on Twitter
  • aloutah
    aloutah Posts: 241
    edited April 2010
    Sorry, im in slc, utah. Thanks for the response though. I really dont want to spend a ton. What did you want for that pair?
    · Share on FacebookShare on Twitter
  • RCFGuitars
    RCFGuitars Posts: 159
    edited April 2010
    aloutah wrote: »
    Sorry, im in slc, utah. Thanks for the response though. I really dont want to spend a ton. What did you want for that pair?

    Well, I really had not thought of selling them until I saw your post, so I'm not exactly sure what a fair price would be. They are in very good shape, but I'm thinking they can only be worth $30-$40. It would probably cost that much or more to ship them to you, and I don't have any boxes that would fit them anyway. Sorry, I thought that if you were close by, I could help you out. Best of luck.
    Primary System
    Polk Audio SDA SRS 2.3TL (RDO198,Sonicap/Dayton/Mills,CardasCCGR,Mye Spikes,DynamatX,Driver Rings,Ben's IC,Bi-Wired)
    Polk Audio CSiA4 x2 (C)
    Polk Audio FXiA6 (S)
    Polk Audio RTiA3 (RS)
    Polk Audio FXiA4 (FX)
    Epik Sentinel x2
    Yamaha RX-V3900
    Rotel RB-1090
    Rotel RMB-1095
    NAD C565 BEE
    Technics/KAB SL-1210M5G w/ Denon DL-160
    Parasound Halo P7
    OPPO BDP-83
    Panasonic TC-P65V10 65" Plasma
    · Share on FacebookShare on Twitter
  • gcstokes1
    gcstokes1 Posts: 56
    edited April 2010
    aloutah wrote: »
    I recently purchased a pair of monitor 10's. They did not come with the stands. I am looking to purchase a pair of original stands or recommendations of new stands that tilt back and would be a good fit. Thanks

    Hi I have a pair from Monitor 7B, which are in pretty good shape cosmetically and great shape structurally. The 7B and the 10 have close to the same footprint IIRC. I don't mind shipping (from Denver) and can work on a quote for that if you want. $40 for the stands, $5 for Paypal and materials.
    G
    · Share on FacebookShare on Twitter
  • aloutah
    aloutah Posts: 241
    edited April 2010
    Any idea what shipping would be to 84102?
    · Share on FacebookShare on Twitter
  • gcstokes1
    gcstokes1 Posts: 56
    edited April 2010
    I will check that this eve.
    G
    · Share on FacebookShare on Twitter
  • gcstokes1
    gcstokes1 Posts: 56
    edited April 2010
    aloutah wrote: »
    Any idea what shipping would be to 84102?

    PM Sent
    · Share on FacebookShare on Twitter
  • wutadumsn23
    wutadumsn23 Posts: 3,702
    edited April 2010
    I was looking for some stands for my 10's as well. Just bought them a few weeks ago, and they too didn't come with the stands.

    -Jeff
    HT Rig
    Receiver- Onkyo TX-SR806
    Mains- Polk Audio Monitor 70
    Center- Polk Audio CS2
    Surrounds- Polk Audio TSi 500's :D
    Sub- Polk Audio PSW125
    Retired- Polk Audio Monitor 40's
    T.V.- 60" Sony SXRD KDS-60A2000 LCoS
    Blu-Ray- 80 GB PS3


    2 CH rig (in progress)
    Polk Audio Monitor 10A's :cool:

    It's not that I'm insensitive, I just don't care.. :D
    · Share on FacebookShare on Twitter
  • Zitro
    Zitro Posts: 864
    edited April 2010
    wutadumsn23 wrote: »
    I was looking for some stands for my 10's as well. Just bought them a few weeks ago, and they too didn't come with the stands.

    -Jeff

    Ditto lol
    - Jeremy

    Amps: Jolida FX-10, NAD 3045, NAD C320BEE, Sansui G-9700
    Speakers: Polk Monitor 7A's, KEF Reference 104aB
    Sources: ProJect Debut Carbon, Sonos streaming FLAC
    · Share on FacebookShare on Twitter
  • comfortablycurt
    comfortablycurt Posts: 6,745
    edited April 2010
    RCFGuitars wrote: »
    Where are you located? I've got an original pair I may be willing to part with, but I really would not want to go the trouble of shipping them. They are bulky and heavy, so it would probably be to costly to ship them anyway. If you are in the Chicago area, let me know, and perhaps we can work something out.

    I'm in the Chicago area(kind of)...and I might be interested in them.

    PM sent.
    The nirvana inducer-
    APC H10 Power Conditioner
    Marantz UD5005 universal player
    Parasound Halo P5 preamp
    Parasound HCA-1200II power amp
    PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
    Audioquest Speaker Cables and IC's
    · Share on FacebookShare on Twitter
  • aloutah
    aloutah Posts: 241
    edited April 2010
    A member in this forum gave me a pair of stands for free. I appreciate the other offers as well, but hey, free is hard to beat, lol.
    · Share on FacebookShare on Twitter