Dead PSW10?

kinzr13
kinzr13 Posts: 1
edited March 2010 in Subwoofer Hookup & Bass Management
I bought a used Polk PSW10 less than a year ago. Recently I noticed it was no longer making any noise, I checked it, the connections and some settings on my reciever then realized that the power indicator wasn't lit up, so I tried plugging it in to some other outlets to try to get power. Now I'm convinced that it's not getting power. I'm wondering what my options are. I removed the back plate to see what a replacement might involve and feel it's beyond my abilities (there are a lot of wires connected to the power cord). I feel like I'm relatively knowledeable about A/V stuff, however some posts I've read here have made me second guess my "knowledge". Any advice or input would be appreciated.

Thanks,

John
Post edited by kinzr13 on
· Share on FacebookShare on Twitter

Comments

  • wutadumsn23
    wutadumsn23 Posts: 3,702
    edited March 2010
    I'm not overly familiar with the PSW10, but if it has a fuse, I would check that first. Other than that, I would call Polk CS in the morning and see what they can do for you. Unfortunately you are not the original owner, and the warranty is not transferable, but they should be able to help you out anyway.

    -Jeff

    1-800-377-POLK (7655)
    9AM-5:30PM EST Mon-Fri
    HT Rig
    Receiver- Onkyo TX-SR806
    Mains- Polk Audio Monitor 70
    Center- Polk Audio CS2
    Surrounds- Polk Audio TSi 500's :D
    Sub- Polk Audio PSW125
    Retired- Polk Audio Monitor 40's
    T.V.- 60" Sony SXRD KDS-60A2000 LCoS
    Blu-Ray- 80 GB PS3


    2 CH rig (in progress)
    Polk Audio Monitor 10A's :cool:

    It's not that I'm insensitive, I just don't care.. :D
    · Share on FacebookShare on Twitter