A question for the Sunfire Guys...

nooshinjohn
Posts: 25,554
Tonight the pretty warm amber glow from my power meter has gone out after a very brief power outage here at the house. Everything else is functioning perfectly after power came back on. How hard is it to replace the light myself on these amps or am I better served by sending it to Bob & Rita for a tune up anyway...
The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
Post edited by nooshinjohn on
Comments
-
Sorry mine does not have the gauges. Sorry.Current HT setup
Mains: B&W 804s
Center: Polk CSi5
Surround: Polk FXi3
Sub: Velodyne DLS-3750R
Receiver: Pioneer SC-07
Amplifier: Sunfire TGA5200
TV: Sony KDS60A2020
DBP: Sony DBP-S350
CDP: Pioneer DV-48AV
Interconnect cables: SignalCable analog II
speaker cables: SignalCable Ultra Speaker Cables Bi-wire -
Is it an LED or light bulb?~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
-
Its a bulb from I hear, but they do go out on a regular basis from reading on AVS, which is why I went for the TGA5200 model instead. You can do it yourself but it will require some soldering. Sunfire will probably send you a replacement for cheap. See here.
http://www.avsforum.com/avs-vb/showthread.php?t=1139116&highlight=sunfire+bulb
http://www.avsforum.com/avs-vb/showthread.php?t=835443&highlight=sunfire+bulb&page=2Shoot the jumper.....................BALLIN.............!!!!!
Home Theater Pics in the Showcase :cool:
http://www.polkaudio.com/forums/showcase/view.php?userid=73580 -
I just leave it, it's not like the guage fluctuates when its active it's all the way to the right, when not it's all the way on the left. Big deal.Marantz AV-7705 PrePro, Classé 5 channel 200wpc Amp, Oppo 103 BluRay, Rotel RCD-1072 CDP, Sony XBR-49X800E TV, Polk S60 Main Speakers, Polk ES30 Center Channel, Polk S15 Surround Speakers SVS SB12-NSD x2
-
They bulbs burn out frequently. I've never replaced mine & don't really give a rat's ****$ if it works or not. The amp sure as hell works~TNRabbit
NO Polk Audio Equipment :eek:
Sunfire TG-IV
Ashly 1001 Active Crossover
Rane PEQ-15 Parametric Equalizers x 2
Sunfire Cinema Grand Signature Seven
Carver AL-III Speakers
Klipsch RT-12d Subwoofer -
nooshinjohn wrote: »Tonight the pretty warm amber glow from my power meter has gone out after a very brief power outage here at the house. Everything else is functioning perfectly after power came back on. How hard is it to replace the light myself on these amps or am I better served by sending it to Bob & Rita for a tune up anyway...
You may want to PM beemers417 about this. To me, he is an expert and could probably guide you right through it.
Or you could e-mail him at : sales@vintagehifishop.com
I hope this helps you out nooshinjohn.
Take Care, B.B.3Sony 52in.XBR6
Sony 32in.XBR6
Anthem AVM50V
Anthem PRE-2L
Sonic Frontiers SFCD-1
Carver C-9
Carver C-19 PreAmp
Carver C-16 PreAmp
2-Carver Silver 7-T's
4-Carver TFM55's
2-Carver TFM35's
1-Carver TFM25
Carver 490T
Denon DCD1560
Sony BDP-S350
Sony PS3
Nintendo Wii
Panasonic DMK23DVR
Speakers :
PolkAudio SDA-SRS
PolkAudio SDA-SRS 1.2TL
PolkAudio SDA-CRS+(Compliments Of Mr. Jim Thomas"jtgranby")
PolkAudio RTA-15TL
PolkAudio M3
3-Velodyne F-1500's