biwired speaker cables
nooshinjohn
Posts: 25,416
looking for a pair of 15ft biwired speaker cables at around 200.00 or less
any help would be grately appreciated
John
any help would be grately appreciated
John
The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
Post edited by nooshinjohn on
Comments
-
Simple: get 30' of Canare 4S11, terminate it with GLS Audio plugs or spades, and wrap the cable in Tech Flex braid. Heat shrink the ends of the braid, mark high and low pairs with heat shrink tape, and you're done for well under $100.
Challenge anyone to tell it apart from "high end" cables in a blind test. Put money on it, if you can. -
tech flex (carbon color, but take your pick):
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=082-348
$12.30/25'
Canare 4s11:
http://www.bluejeanscable.com/store/speaker/index.htm
$1.35/ft x 27' = $36.45 (can be found a little cheaper)
GLS Audio Bananas:
http://www.speakerrepair.com/mm5/merchant.mvc?Screen=PROD&Store_Code=genem&Product_Code=BR8&Category_Code=safe_connect
$20 for 4 pair, but I have the same for $12. You may want spades or locking bananas, though.
$68.75, before the heat shrink. Get a better deal on the 4s11, and buy my nanners, and come in under $60.
