SDA CRS + problem....
xj4094dg
Posts: 1,158
Happy Saturday,
Today I discovered the inner (stereo source) mid-woofer in the right speaker was not producing any sound:(. I opened the box and checked the connectors, ok. I pulled the wires from the offending driver and hooked up a spare driver, nothing. Pulled the dimensional source mid-woofer's wires and got sound from the all the drivers. Looks like I have a problem on the crossover. I was planning the 4.1 TL upgrade but don't know what to expect now. Is there an easy way to diagnose these?
Thanks in advance for any help.....
Today I discovered the inner (stereo source) mid-woofer in the right speaker was not producing any sound:(. I opened the box and checked the connectors, ok. I pulled the wires from the offending driver and hooked up a spare driver, nothing. Pulled the dimensional source mid-woofer's wires and got sound from the all the drivers. Looks like I have a problem on the crossover. I was planning the 4.1 TL upgrade but don't know what to expect now. Is there an easy way to diagnose these?
Thanks in advance for any help.....
"The good thing about science is that it's true whether or not you believe in it." Neil deGrasse Tyson.
Post edited by xj4094dg on
Comments
-
Take the crossover out and examine all of the solder joints and all of the cap/resistor/inductor leads.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk
