BLADE / BLADE SDA Interconnects - 2 Available
inspiredsports
Posts: 5,501
I've just built myself some custom IC's for my Polks' leaving me with TWO SDA Blade / Blade Interconnects available for sale.
--- The first is the original 20' 16-2 AWG cable with factory molded blade/blade connectors that was supplied new-in-the-box by Polk in 1987 when I purchased my SDA-2B's. I'd like $35 (OBO) shipped anywhere in the US and I will absorb the PayPal fee.
--- The second is a 23' cable I purchased four months ago from Polk in November '08. I ordered a 20 footer, but I think they custom build and must have had 23' left on the Belden 16-2 cable roll they were using as that is what they shipped. This cable use the same after-market blade/blade connectors I was able to source at http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=248760& to build my custom cables. I'd also like $35 (OBO) shipped anywhere in the US and I will absorb the PayPal fee.
Both are in excellent condition . . . Good photos follow . . .
.
--- The first is the original 20' 16-2 AWG cable with factory molded blade/blade connectors that was supplied new-in-the-box by Polk in 1987 when I purchased my SDA-2B's. I'd like $35 (OBO) shipped anywhere in the US and I will absorb the PayPal fee.
--- The second is a 23' cable I purchased four months ago from Polk in November '08. I ordered a 20 footer, but I think they custom build and must have had 23' left on the Belden 16-2 cable roll they were using as that is what they shipped. This cable use the same after-market blade/blade connectors I was able to source at http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=248760& to build my custom cables. I'd also like $35 (OBO) shipped anywhere in the US and I will absorb the PayPal fee.
Both are in excellent condition . . . Good photos follow . . .
.
VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels
Post edited by inspiredsports on
Comments
-
They are custom built, by Kim Jasper...inside a very small cube at Polk HQ.CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
-
I will take the first original cable. You can PM with the payment specifics. Thanks.Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
Yamaha RX-V2500 System, Carver A753 3 channel amp.
Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp
Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9 -
I will take the first original cable. You can PM with the payment specifics. Thanks.
Thanks! PM sent.VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels -
I would love to take the second.SDA 1C, SDA 2A, SDA SRS 2, CMT-340SE, Swan M200MKII, Swan D1080MKII, Behringer MS40
Outlaw Audio M2200 x2, GFA 555 II, BGW 750C
GDA 700, Outlaw Audio Model 990, Sansa Fuze, X-Fi Platinum Fatality -
VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels -
I will take the first original cable. You can PM with the payment specifics. Thanks.
Thanks!
1st one (20 footer) is sold and was shipped via 2-3 Day Priority Mail at 4PM EST.
PM sent and second (23 footer) sale is pending.
GregVTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels -
Both sold and Shipped - Thanks!
Feedback left
gwVTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels