Sanyo A35 Plus Series integrated amp

stuwee
stuwee Posts: 1,508
edited September 2012 in Electronics
Just bought off ebay because it was my first brand new audio purchase back in high school. I loved that amp but it got away from me, I was looking for years to replace it, found one that was built the same day I was born 8/10 (what are the odds?!?) I stupidly hooked it up to the Martin Logans keeping the volume low. Amazing MOSFET sound from this little 50watt amp! I had a cassette deck on top of it, checking frequently to feel if it was getting hot, it was getting quite warm (there was no other way to set the amp and a source with my custom speaker cables). It suddenly shuts down. Into protection I assume. I unplug it, there was no magic smoke, nothing smelled burnt, I let it cool down overnight. Next day I push the power button, the lights come on, the meters salute, the button doesn't stay engaged, the lights go back out, I opened her up, nothing looks amiss. I took some crappy pics. #3 and #5 show the power switch area, there is a small brown wire going from the bottom of the switch to the main board, it has 'mute' stamped on top of the board where the wire wraps around a post. I have little to no tech skills. I'd appreciate any and all input on areas to look for the trouble spot. The fuse is intact, it's hard to see in pic #1 under the bundle of wires.
Thanks in advance, SM's for this amp must be like hen's teeth.

Craig
Thorens TD125MKII, SME3009,Shure V15/ Teac V-8000S, Denon DN-790R cass, Teac 3340 RtR decks, Onix CD2...Sumo Electra Plus pre>SAE A1001 amp>Martin Logan Summit's
Post edited by stuwee on

Comments

  • Mark Wilson
    Mark Wilson Posts: 4
    edited April 2009
    Craig I bought and still have an A35. Somewhere in the basement in its origional box. I bought the schematic diagram when I bought the amp. I can scan and email it to you. Or send it by post. During the 28 years I've owned mine only the "on" switch and one channel power transister has failed. I had them both replaced by a pro. One of the best sounding amps for the money. Email me at mtwphl@yahoo.com
  • stuwee
    stuwee Posts: 1,508
    edited April 2009
    Craig I bought and still have an A35. Somewhere in the basement in its origional box. I bought the schematic diagram when I bought the amp. I can scan and email it to you. Or send it by post. During the 28 years I've owned mine only the "on" switch and one channel power transister has failed. I had them both replaced by a pro. One of the best sounding amps for the money. Email me at mtwphl@yahoo.com

    Hi Mark! Your first post and it's to help me out! :) You are a Godsend! Welcome to clubpolk!! You have an email, I can't tell you how nice and how much this means to me! Please let me know if there's anyway I can return the favor, anytime! :)!

    Regards,
    Craig Chester
    Thorens TD125MKII, SME3009,Shure V15/ Teac V-8000S, Denon DN-790R cass, Teac 3340 RtR decks, Onix CD2...Sumo Electra Plus pre>SAE A1001 amp>Martin Logan Summit's
  • nistor35
    nistor35 Posts: 1
    edited September 2009
    Hi, Please help me , I need schematic for Sanyo A35, If this is posible, email me this schematic to nistor35@yahoo.com Excuse my english language, I am from Romania.
  • Mark Wilson
    Mark Wilson Posts: 4
    edited October 2009
    Sent you the diagrams you asked for. Check your email.
  • jpaudio
    jpaudio Posts: 1
    edited July 2010
    Hello to all. First of all congratulations to all about this energetic and enthousiastic community. I would appreciate if you send me the Sanyo's A35 schematics to jpaudiolab@hotmail.com. This amp is a very good one for its size and age.
    Thanks in advance.
    Regards,
    John
  • Mark Wilson
    Mark Wilson Posts: 4
    edited August 2010
    Hi John, Wanted to let you know I sent the schematics to your email. This thread is still active. I respond to all requests for the diagram. Typing "Sanyo A35" in the subject area alerts to them! It seems the world is still fiull of A35's!

    M. Wilson (mtwphl@yahoo.com}
  • Mark Wilson
    Mark Wilson Posts: 4
    edited September 2012
    DSC02853.jpg
    Hi,
    Just wanted to update and let all who have been looking for the schematic diagram for the Sanyo A35 Plus Series integrated amp that this link is still alive. I respond to the email address above. I have had quite a few requests over the past few years. And have replied to all of them. Also I have submitted the diagram to "HiFi Engine" so you can also find it there. Also I have brought the old stereo components up from the basement and started using them again. Wish I had done it a long time ago. Happy listening . . .

    Mark