LSi7 for Centre
jacob.simpson
Posts: 481
Am using RX-v663 Can i use a pair of LSi7 Bookshelf connected in Series to get 8 ohm Load as a centre Channel, Am using R50 as Front and Fxi3 as Surrounds (additionally RM6800 as 5.1) Planning to Sell RM6800 and get a DSW MP1000, or if i get a Monitor 40 at good price, for Centre and connect in series it will be 16 ohm will it be too bad to connect it in series or will i damage the AVR with parallel connection which will presend 4 ohms load.
I know am mixing up series here. Will the sound be very different with mix up of the series.
I know am mixing up series here. Will the sound be very different with mix up of the series. Post edited by jacob.simpson on
Comments
-
Bad idea. Use them as mains and if budget holds it, get a 2ch amp to power them.
-
Keep the front stage (L-R-C) speakers the same. You can probably get away with the FXi3's for surrounds. So decide on what you want to use as fronts and pick a center accordingly.
-
Your running 3 different types of speakers in your HT setup. I would pick one type you like and use those. As far as using LSI 7's for a center channel I did but I ran mine on a external amp.
