External Cooling

smglbrth
smglbrth Posts: 1,492
edited February 2009 in Electronics
I've been reading alot on other forums lately about heat build-up on some audio equipment and wondered if you guys, anyone, actually uses some type of external fans. The used AVR I bought runs warm, just above the case (Appr. 3/4 inch) my wifes food thermometer say anywhere from 110-127.6 degrees F. My cabinet is totally open in the front with 6 inches above, 1 inch on each side and three inches in the rear free. The back is closed off except for two small holes which I drilled out for cables and such. I need to leave the back of the cabinet on for the WAF. The AVR does have it's own internal fan (which has never turned on) which faces the rear of the unit.

I've never actively cooled any of my audio equipment, ever. Part of me thinks it would be a good idea and part of me thinks it's nuts.

Any thoughts?
Remember, when you're running from something, you're running to something...-me
Post edited by smglbrth on

Comments

  • GEBBY44
    GEBBY44 Posts: 939
    edited February 2009
    Depending upon the AVR, it may not need it. My Onkyo 805 supposedly has internal fans, but I never heard them kick on, even when it got really hot. I like to be safe so I bought a cooling fan with a dc wall wart that I just plug into the back of the AVR. Kicks on whenever AVR is on and it keeps the internal temp about 10 degrees C cooler.

    I got a package with one of these fans and an adjustable speed wall wart. The piece of mind was worth the $30 to me.

    http://www.coolerguys.com/sff21.html
  • smglbrth
    smglbrth Posts: 1,492
    edited February 2009
    I've seen some fans which are supposed to go directly on top of the equipment and they look kind of fake. Like they were painted to look cool and such. Taking a hole out of the back of this cabinet of that size will not be in the works for me. I'd probably get shot (she wasn't real wild about me purchasing this anyway). If I was to do something like this I'd probably just get a small square fan and lay it directly over the processing area pulling the inside air out. At least this is where it's the warmest. By the way, it is an Oink, the 787. Older, to be sure, but sounds excellent for movies. Much better than my old Pro Logic stuff. DTS is awesome... Not too good for 2 channel but that's not why I have it.:D
    Remember, when you're running from something, you're running to something...-me
  • Mike21
    Mike21 Posts: 252
    edited February 2009
    The Onk 805 does not have any internal fans - I've seen the insides. I cool off my 805 the same way GEBBY does. My rig cost $9. Amazingly, the Onk 705 does have a fan.

    For fans that will fit in a cabinet, take a look at

    > the Parasound Zbreeze - $200 @ www.audioadvisor.com

    > the Cool Components fans - $55 to $165 @ www.parts-express.com

    Mike21
    ____________________________________________
    Home Theater 32"LG LCD; Comcast; 7.1 Onkyo 805; Fronts: Polk M50s; Center: Polk CS2; Sides: Polk M40s; Rear: B&W LM1s; Subs: (2) Sony 12" x 100w; Samsung 1500BDP; Toshiba A-2 HD-DVDP.
    PC stereo: Viper custom PC: Windows XP; ASIO4ALL; JRiver Jukebox> Pop Pulse USB to S/PDIF conv> Monarchy DIP > Musiland MD10 DAC > Parasound 2100 pre> Aragon 4004 MKII amp> Dali Ikon6 towers; Sunfire True Sub; PSA Duet, Ultimate outlet and Noise Harvestors.
  • comfortablycurt
    comfortablycurt Posts: 6,745
    edited February 2009
    If it's between 110 and 127 degrees it's probably alright. I remember reading somewhere a while back, that the optimum operating temp. of most AVR's is around 115-120 degrees. Once it starts getting up to 135 or higher it might be time to look into cooling fans.

    It definitely won't hurt anything to put some in though.
    The nirvana inducer-
    APC H10 Power Conditioner
    Marantz UD5005 universal player
    Parasound Halo P5 preamp
    Parasound HCA-1200II power amp
    PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
    Audioquest Speaker Cables and IC's