psw 250 connections

ctgraham
ctgraham Posts: 1
edited February 2009 in Subwoofer Hookup & Bass Management
I Have my psw250 connected to a system with the rm6200 surround speakers. I am using a Harmon Kardon AVR 347 receiver. The speakers all sound great with the exception of the sub. I am getting little to no bass output and a fair amount of feedback. Any suggestions on how to fix this issue? I have tried adjusting the volme levels and all that does is increase the feedback. I am fairly new to this so im sure I have something wrong:confused:
Post edited by ctgraham on
· Share on FacebookShare on Twitter

Comments

  • Vette C6.r
    Vette C6.r Posts: 1,560
    edited January 2009
    There is probably a setting in the receiver that allows you to set the bass to subwoofer or mains or both.

    Try that it might help

    TK
    · Share on FacebookShare on Twitter
  • Music Junkie
    Music Junkie Posts: 17
    edited February 2009
    Be sure your receiver is set to subwoofer = "off" or "none"

    This is assuming you have your wires as follows:
    a) receiver to the R and L speaker inputs on the sub, and
    b) the 2 front speakers connected to the output channels of the sub.

    Good luck!
    · Share on FacebookShare on Twitter