SRS 2.3's

Cardinals-1
Cardinals-1 Posts: 80
edited February 2009 in For Sale (FS) Classifieds
I have a set of SDA SRS 2.3's for sale.

I am the original owner and they are in excellent condition both cosmetically and acoustically.

I would help deliver within 2 hours of ZIP 62234.

I will post photos soon. My IT department is blocking something in our firewall. "I think they expect me to work or something":rolleyes:

I am asking $850.00
Post edited by Cardinals-1 on
· Share on FacebookShare on Twitter

Comments

  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    Lasareath wrote: »
    Those Damn IT guys!

    I saw your rebuild. It was impressive. My 2.3's are in a little better shape then what you started out with. :)

    I have only moved them twice and each time in the back of a minivan with blankets.
    · Share on FacebookShare on Twitter
  • Mike Reeter
    Mike Reeter Posts: 4,315
    edited January 2009
    Collinsville IL. ????

    Some SDA's for sale in the midwest...a rare occasion
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    Yes I am in Collinsville/Maryville IL. They were bought at Sound Central on Lindberg back in the day.

    I will not ship them. I would cry if they got ruined by some knucklehead from a freight company. I would however deliver within 2 hours. I always recommend auditioning them first. I know how sweet they sound, but if someone is not use to the SDA effect they can take a little getting use to.
    · Share on FacebookShare on Twitter
  • Ricardo
    Ricardo Posts: 10,636
    edited January 2009
    Lasareath wrote: »
    I think that this time since they are in very good shape I may remove the top two 6.5" drivers and the Passive Radiator and use those holes as handholds to carry them down the stairs and into the van.

    Maybe these have not reached NJ?

    dolly_hand_truck.jpg

    ;)
    _________________________________________________
    ***\\\\\........................... My Audio Journey ............................./////***

    2008 & 2010 Football Pool WINNER
    SOPA
    Thank God for different opinions. Imagine the world if we all wanted the same woman
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,420
    edited January 2009
    are these the same ones that were on craigslist?
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • average_guy
    average_guy Posts: 236
    edited January 2009
    I'm 3 hours east of Indy. How far west of Indy are you?
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    Lasareath wrote: »
    Thank You.

    I'm dreading moving mine. I'm closing on my first house in a couple of days (the Damn Mortgage Company has my application for 6 weeks now, you won't believe the amount of crap they look through these days!) and I will have to Move them from my 2nd Floor Apartment into a van and to my new house.

    I think that this time since they are in very good shape I may remove the top two 6.5" drivers and the Passive Radiator and use those holes as handholds to carry them down the stairs and into the van.

    This idea may work very well. I'm always afraid of stretching out the fabric on the sides of the SRS speakers. So this way the hand that holds onto the speaker inside one of the driver holes will do most of the work and my other hand can just guide it and keep it stable.

    I'm going to rent a separate truck/van for just moving my speakers and get help from my brother and cousins.

    I cannot trust the Movers with my speakers.

    Sal

    Instead of removing drivers I would suggest using a heavy moving blanket and a few competent men to help you move them. Lay them down in the blanket and carry them hammock style. That is how I moved mine and had no issues.
    · Share on FacebookShare on Twitter
  • hoosier21
    hoosier21 Posts: 4,411
    edited January 2009
    Ricardo wrote: »
    Maybe these have not reached NJ?

    dolly_hand_truck.jpg

    ;)

    funny stuff
    Dodd - Battery Preamp
    Monarchy Audio SE100 Delux - mono power amps
    Sony DVP-NS999ES - SACD player
    ADS 1230 - Polk SDA 2B
    DIY Stereo Subwoofer towers w/(4) 12 drivers each
    Crown K1 - Subwoofer amp
    Outlaw ICBM - crossover
    Beringher BFD - sub eq

    Where is the remote? Where is the $%#$% remote!

    "I've always been mad, I know I've been mad, like the most of us have...very hard to explain why you're mad, even if you're not mad..."
    · Share on FacebookShare on Twitter
  • 4406bbl
    4406bbl Posts: 194
    edited January 2009
    2 guys can handle 1.2s no problem,I carried my 2.3tls in my house alone.
    · Share on FacebookShare on Twitter
  • george daniel
    george daniel Posts: 12,096
    edited January 2009
    4406bbl wrote: »
    2 guys can handle 1.2s no problem,I carried my 2.3tls in my house alone.

    How?
    JC approves....he told me so. (F-1 nut)
    · Share on FacebookShare on Twitter
  • 4406bbl
    4406bbl Posts: 194
    edited January 2009
    They are the perfect size,you can set them sideways,pick them up,lean the top on your shoulder, and carry them in. They only weigh 130 lbs I weigh 265.
    · Share on FacebookShare on Twitter
  • Face
    Face Posts: 14,340
    edited January 2009
    4406bbl wrote: »
    They are the perfect size,you can set them sideways,pick them up,lean the top on your shoulder, and carry them in. They only weigh 130 lbs I weigh 265.
    A friend used the same method to carry SRS 2's into my house and it didn't damage them at all.
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    I finally got pics. I will get driver closeups tomorrow.

    Sorry for the delay
    · Share on FacebookShare on Twitter
  • opus
    opus Posts: 1,252
    edited January 2009
    Welcome back Cardinals, Good luck on your sale
    The Flea rig
    Hitachi 50VG825 LCD
    Rotel RSP 1066 (pre) :)-flea market
    B&K St-202 (mains)-flea market
    Carver M 200t (x2) (center and surrounds)-flea market
    Blu-Ray..PS3 (dvd player)
    Polk RTA-11t-flea market
    LsiC, Fxi30's
    Dual SVS PC-Utra's (1 port blocked) thanks MikeC78
    Behringer Feedback Destroyer    -flea market
    AudioAlchemy DDE v1.0 DAC-flea market
    Cambridge Audio Azur 640 CDP-flea market
    Signal Cable and Kimber Kable
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,567
    edited January 2009
    Ricardo wrote: »
    Maybe these have not reached NJ?

    dolly_hand_truck.jpg

    ;)

    Hilarious!


    BTW, the 2.3(TL) weigh 155 lbs.



    Good luck with your sale.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,567
    edited January 2009
    Sal, as big as you are just put one under each arm....you're good to go.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    I will try to get more detailed driver photos soon.

    Sorry for the delay.
    · Share on FacebookShare on Twitter
  • ND13
    ND13 Posts: 7,601
    edited January 2009
    Are those donut drivers even available anymore?
    "SOME PEOPLE CALL ME MAURICE,
    CAUSE I SPEAK OF THE POMPITIOUS OF LOVE"
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    I do not think so.

    All the drivers are in very good shape and with the neoprene surrounds they should last a long time.
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited January 2009
    I am posting them in the local papers soon. I would take $700.
    · Share on FacebookShare on Twitter
  • Dennis47
    Dennis47 Posts: 65
    edited January 2009
    Cardinals-1,

    PM sent....
    PL 4000 II / PL 400 II x2 / PL 5100 II / PL 6000 II
    PL 7000 II / PL 1000 w/JDV mod x2 / PL 1100 II
    Carver C-1 / C-11 / C-4000t / M-1.0t (MKII opt 002)
    M-1.5t x2 / TFM-15 / TFM-22 x2 / TFM-24 x2
    TFM-45 x2 / HR-752 / DPL-33 / TD-1400 / TD-1700
    TDR-2400 / TX-12 / DTL-100 / SDA-490t
    Thorens 316 / Roberts 770X x2 / ADC SS3 MKII
    Polk SDA SRS / Polk SDA SRS 2.3 (XO upgrade)
    Polk SDA-2B (XO upgrade)
    Polk Monitor 12 & Monitor 5jr
    Polk Monitor 10B (XO upgrade)
    Polk Monitor 7C (XO upgrade)
    · Share on FacebookShare on Twitter
  • Cardinals-1
    Cardinals-1 Posts: 80
    edited February 2009
    Sold and delivered to Dennis47. I believe it was an excellent transaction.

    I already miss them :-(
    · Share on FacebookShare on Twitter
  • Dennis47
    Dennis47 Posts: 65
    edited February 2009
    Thanks to Cardinals-1 I am now the owner
    of a set of Polk SDA SRS 2.3's. ::D:D:D
    Flawless transaction with delivery to boot!
    PL 4000 II / PL 400 II x2 / PL 5100 II / PL 6000 II
    PL 7000 II / PL 1000 w/JDV mod x2 / PL 1100 II
    Carver C-1 / C-11 / C-4000t / M-1.0t (MKII opt 002)
    M-1.5t x2 / TFM-15 / TFM-22 x2 / TFM-24 x2
    TFM-45 x2 / HR-752 / DPL-33 / TD-1400 / TD-1700
    TDR-2400 / TX-12 / DTL-100 / SDA-490t
    Thorens 316 / Roberts 770X x2 / ADC SS3 MKII
    Polk SDA SRS / Polk SDA SRS 2.3 (XO upgrade)
    Polk SDA-2B (XO upgrade)
    Polk Monitor 12 & Monitor 5jr
    Polk Monitor 10B (XO upgrade)
    Polk Monitor 7C (XO upgrade)
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited February 2009
    yes they still make the donut drivers MW6513 I just got one for mine a few weeks ago.
    · Share on FacebookShare on Twitter