5-Channel Amp Question
Options
sir_lagzalot
Posts: 258
Right now I'm using two Sony amps running mono@300wpc for the fronts and an Onkyo 805 for the center, surrounds, and rears. My question is it better to buy a good 3-channel amp and run the fronts and center off of it and use the Sonys stereo@110wpc to run the surrounds and rears, or buy a good 5-channel amp to run the center, surrounds, and rears and leave the Sonys running the fronts.
****Home Theater****
Integra DHC-40.1
Rotel RMB-1075
Fronts 265-RT
Center 265-RT
Rears 65-RT
Sub BIC H-100
****VIDEO****
Projector Epson 8700 UB
BLU-RAY Sony BDP-S1000ES
****2-Channel****
Magnepan SMGa
Sub ED A3-250
AMC 3100a
TT Music Hall 2.2
Bellari VP 130 Phono Pre
Grant Fidelity Tube DAC-09
Sirius Stiletto 2
Integra DHC-40.1
Rotel RMB-1075
Fronts 265-RT
Center 265-RT
Rears 65-RT
Sub BIC H-100
****VIDEO****
Projector Epson 8700 UB
BLU-RAY Sony BDP-S1000ES
****2-Channel****
Magnepan SMGa
Sub ED A3-250
AMC 3100a
TT Music Hall 2.2
Bellari VP 130 Phono Pre
Grant Fidelity Tube DAC-09
Sirius Stiletto 2
Post edited by sir_lagzalot on
Comments
-
Buy a 7-channel amp. The difference in cost between a 5 vs. 7 channel amp is negligible and gives you more options. Buy an Emotiva UPA-7.HT/2-channel Rig: Sony 50 LCD TV; Toshiba HD-A2 DVD player; Emotiva LMC-1 pre/pro; Rogue Audio M-120 monoblocks (modded); Placette RVC; Emotiva LPA-1 amp; Bada HD-22 tube CDP (modded); VMPS Tower II SE (fronts); DIY Clearwave Dynamic 4CC (center); Wharfedale Opus Tri-Surrounds (rear); and VMPS 215 sub
"God grooves with tubes." -
Thanks for the advice Early****Home Theater****
Integra DHC-40.1
Rotel RMB-1075
Fronts 265-RT
Center 265-RT
Rears 65-RT
Sub BIC H-100
****VIDEO****
Projector Epson 8700 UB
BLU-RAY Sony BDP-S1000ES
****2-Channel****
Magnepan SMGa
Sub ED A3-250
AMC 3100a
TT Music Hall 2.2
Bellari VP 130 Phono Pre
Grant Fidelity Tube DAC-09
Sirius Stiletto 2 -
I would definately recommend running all your speakers with the same amp, be it 5 or 7 channel. My HT solidified tremendously when I went from a 2 channel x 200 ADCOM powering the L&R and the receiver driving the rest to a 5 channel x 125w ADCOM GFA-7000.HT
RTi70 mains
CSi30 center
RTi28 Rears
Velodyne CHT-12
H/K AVR-247
ADCOM GFA-7000
Samsung PN58B860
Playstation 3
2-Channel
Polk Audio LSi15's
Rotel RCD-1072
Nakamichi CA-5 Pre
ADCOM GFA-555
Signal Cable Analog II IC's
Signal Ultra Bi-Wire Speaker Cables -
If I were you, I'd consider getting another sony TA-N330ES to run my center channel. I think those amps are awesome - they sound very good, drive almost anything, and seem to last forever. Your 805 has plenty of juice to run the surrounds.
To be honest though, I think you have more than enough amplification. I don't think you're going to get a significant improvement (if any). The TA-N330ES's can easily drive 2 RTi10s each. I know b/c I own 2. I've tried them bridged and in stereo and heard no difference on my RTi10's in a rather large room. I'm currently using them to drive some other speakers though. Perhaps consider soom room treatments or upgrading speakers if you are dissatisfied. I seriously think you'd be wasting money on more amps...your Sonys are awesome and the onkyo is one of the strongest receivers around. -
If I were you, I'd consider getting another sony TA-N330ES to run my center channel. I think those amps are awesome - they sound very good, drive almost anything, and seem to last forever. Your 805 has plenty of juice to run the surrounds.
To be honest though, I think you have more than enough amplification. I don't think you're going to get a significant improvement (if any). The TA-N330ES's can easily drive 2 RTi10s each. I know b/c I own 2. I've tried them bridged and in stereo and heard no difference on my RTi10's in a rather large room. I'm currently using them to drive some other speakers though. Perhaps consider soom room treatments or upgrading speakers if you are dissatisfied. I seriously think you'd be wasting money on more amps...your Sonys are awesome and the onkyo is one of the strongest receivers around.
It's not an issue of having enough power with the Sony's. Any external amp is going to have higher quality power than the Oinker amp section. Adding a 5 channel amp will allow all 5 speakers to be driven by the same amp all with the same sound signature. I was perfectly happy with my GFA-555 and AVR setup, but once I added the GFA-7000 powering all 5 channels, the soundstage solidified and location in the room is now seamless. I can't directly tell which speaker sound is coming from easily. I actually stepped down in power from 200wpc to 125wpc and am happier with the performance of my HT.HT
RTi70 mains
CSi30 center
RTi28 Rears
Velodyne CHT-12
H/K AVR-247
ADCOM GFA-7000
Samsung PN58B860
Playstation 3
2-Channel
Polk Audio LSi15's
Rotel RCD-1072
Nakamichi CA-5 Pre
ADCOM GFA-555
Signal Cable Analog II IC's
Signal Ultra Bi-Wire Speaker Cables -
I have never been happier since I started using a five channel amp, up from a two. I feel the sound is more even thoughout the room. I debated over the power of the amp also. I elected to go with 200w Vs. 125w. Not sure if it would have made a big difference for me (room size and speaker quality), but I was afraid I would always wonder if I had gone with 125w.Anthem D2v
NAD M50 Music Server
B & K Reference 200.5
Parasound A21
B & W 804 (Mains)
B & W HTM1 (Center)
Polk Rti4 (Surrounds)
PS3
Seaton Submersive HP
Pioneer PDP 6010FD Kuro -
Welcome to Club Polk TG.Marantz AV-7705 PrePro, Classé 5 channel 200wpc Amp, Oppo 103 BluRay, Rotel RCD-1072 CDP, Sony XBR-49X800E TV, Polk S60 Main Speakers, Polk ES30 Center Channel, Polk S15 Surround Speakers SVS SB12-NSD x2
