One bad channel..B&K ST 1430 II

paymontna
paymontna Posts: 188
edited July 2008 in For Sale (FS) Classifieds
Sold and Shipped to SKsolutions


I was testing my new Sunfire CGP. I had to test the processor with this B&K amp because my Sunfire amp will not be in for a few days, and there is only a 7 day return policy on the TGP. So...I did a stupid thing and plugged the RCA jack in while the power was on and blew the 1 channel on the B&K amp :eek: :eek:.

$130 shipped anywhere in the East + PayPal. Work something out if you are farther away.

I am totally bumbed about this; ruined a sunny day.

Pay

Old link to previous sale for pictures
http://www.polkaudio.com/forums/showthread.php?t=69460
And I mean calling all cars, blackhawk down, mushroom cloud, Three Mile Island, lock the door behind you kind of mad.:mad:
Post edited by paymontna on

Comments

  • amulford
    amulford Posts: 5,020
    edited July 2008
    Did you open it up and check for fuses?
  • MKZ
    MKZ Posts: 1,068
    edited July 2008
    You can still uses as 2 channel amp anyway.
  • GEBBY44
    GEBBY44 Posts: 939
    edited July 2008
  • ViperZ
    ViperZ Posts: 2,046
    edited July 2008
    I'll get in line if Gebby doesn't want it.
    Panasonic PT-AE4000U projector for movies
    Carada 106" Precision Series (Classic Cinema White)
    Denon AVR-X3600H pre/pro
    Outlaw 770 7-channel amplifier
    B&W CDM1-SE fronts
    B&W CDM-CNT center
    B&W CDM1 rears on MoPADs
    JBL SP8CII in-ceiling height speakers
    Samsung DTB-H260F OTA HDTV tuner
    DUAL NHT SubTwo subwoofers
    Oppo BDP-93 Blu-Ray player
    Belkin PF60 Power Center
    Harmony 1100 RF remote with RF extender
    Sony XBR-X950G 55" 4K HDR Smart TV + PS3 in the living room
  • dcmeigs
    dcmeigs Posts: 708
    edited July 2008
    Me three.
    The world is full of answers, some are right and some are wrong. - Neil Young
  • GEBBY44
    GEBBY44 Posts: 939
    edited July 2008
    I pulled out early...

    So I whoever is next in line, it's yours.
  • Sami
    Sami Posts: 4,634
    edited July 2008
    Check out the fuses before selling it. If it still is broken, put me down as well, I could use it as 2ch amp.
  • ViperZ
    ViperZ Posts: 2,046
    edited July 2008
    GEBBY44 wrote: »
    I pulled out early...

    So I whoever is next in line, it's yours.

    I PM'd OP.
    Panasonic PT-AE4000U projector for movies
    Carada 106" Precision Series (Classic Cinema White)
    Denon AVR-X3600H pre/pro
    Outlaw 770 7-channel amplifier
    B&W CDM1-SE fronts
    B&W CDM-CNT center
    B&W CDM1 rears on MoPADs
    JBL SP8CII in-ceiling height speakers
    Samsung DTB-H260F OTA HDTV tuner
    DUAL NHT SubTwo subwoofers
    Oppo BDP-93 Blu-Ray player
    Belkin PF60 Power Center
    Harmony 1100 RF remote with RF extender
    Sony XBR-X950G 55" 4K HDR Smart TV + PS3 in the living room
  • unc2701
    unc2701 Posts: 3,587
    edited July 2008
    Gallo Ref 3.1 : Bryston 4b SST : Musical fidelity CD Pre : VPI HW-19
    Gallo Ref AV, Frankengallo Ref 3, LC60i : Bryston 9b SST : Meridian 565
    Jordan JX92s : MF X-T100 : Xray v8
    Backburner:Krell KAV-300i
  • paymontna
    paymontna Posts: 188
    edited July 2008
    I looked and all the fuses looked good, unless they do not have to be totally broken to be bad. I really only took a good look at the channel one fuse, but then I got to thinking why were the there fuses in there for the 3 channels that do not exist. Maybe they are wired in parallel with the 3 existing channels. I will have to take a look at the specs in that link. If they are wired in parallel, that means that if one fuse goes bad, say the 6th channel fuse, it would cause the 6th and 1st channel to go out.
    And I mean calling all cars, blackhawk down, mushroom cloud, Three Mile Island, lock the door behind you kind of mad.:mad:
  • ViperZ
    ViperZ Posts: 2,046
    edited July 2008
    paymontha, according to the service manual, there are two rail fuses (F1 and F2 - slow blow fuses on V+ and V- rails).

    Per parts list, there are also F1A, F1B, F2A and F2B fuses. They are the same 4A fuses. I haven't looked at the schematic in detail, but they are most likely rail (V+ and V-) fuses for each channel (2 fuses per channel).

    Find the above 6 fuses, and check the continuity with the multimeter - even with the cheap multimeter (just check that the resistance is zero ohms).

    If the fuses are good, then it's likely that you blew something in the channel (like an output transistor).

    (and I am still very interested in buying this amp ;)).
    Panasonic PT-AE4000U projector for movies
    Carada 106" Precision Series (Classic Cinema White)
    Denon AVR-X3600H pre/pro
    Outlaw 770 7-channel amplifier
    B&W CDM1-SE fronts
    B&W CDM-CNT center
    B&W CDM1 rears on MoPADs
    JBL SP8CII in-ceiling height speakers
    Samsung DTB-H260F OTA HDTV tuner
    DUAL NHT SubTwo subwoofers
    Oppo BDP-93 Blu-Ray player
    Belkin PF60 Power Center
    Harmony 1100 RF remote with RF extender
    Sony XBR-X950G 55" 4K HDR Smart TV + PS3 in the living room
  • ViperZ
    ViperZ Posts: 2,046
    edited July 2008
    My apologies. Due to unforeseen purchase (another receiver on ebay), I am pulling out. dcmeigs, you were next?
    Panasonic PT-AE4000U projector for movies
    Carada 106" Precision Series (Classic Cinema White)
    Denon AVR-X3600H pre/pro
    Outlaw 770 7-channel amplifier
    B&W CDM1-SE fronts
    B&W CDM-CNT center
    B&W CDM1 rears on MoPADs
    JBL SP8CII in-ceiling height speakers
    Samsung DTB-H260F OTA HDTV tuner
    DUAL NHT SubTwo subwoofers
    Oppo BDP-93 Blu-Ray player
    Belkin PF60 Power Center
    Harmony 1100 RF remote with RF extender
    Sony XBR-X950G 55" 4K HDR Smart TV + PS3 in the living room
  • SKsolutions
    SKsolutions Posts: 1,820
    edited July 2008
    If I'm reading the thread right, it's up to dcmeigs. If he doesn't take it, I'd be happy to.
    -Ignorance is strength -
  • Sami
    Sami Posts: 4,634
    edited July 2008
    I think the OP is still looking to get it fixed, as he should. If he chooses to go with the order of interest expressed, yes, it's up to dcmeigs, then me and I won't pass it up, could pair it with the 3ch Acurus I just got to get 5 channels.
  • paymontna
    paymontna Posts: 188
    edited July 2008
    Sami wrote: »
    I think the OP is still looking to get it fixed, as he should. If he chooses to go with the order of interest expressed, yes, it's up to dcmeigs, then me and I won't pass it up, could pair it with the 3ch Acurus I just got to get 5 channels.

    The stork just delivered my baby Sunfire. So, I will not be ampless if I selloff the B&K. So as soon as I can get it unpacked and checked out, I will replace all six fuses in question. If that does not work out, the price stands and dcmeigs has firsts. I do request that anyone on the other side of the Miss. help out with the shipping. I am guessing about $60 to the west coast via UPS ground.

    Pay
    And I mean calling all cars, blackhawk down, mushroom cloud, Three Mile Island, lock the door behind you kind of mad.:mad:
  • shawn474
    shawn474 Posts: 3,047
    edited July 2008
    I'll get in line too. If dc and sks pass, I am in.

    Shawn
    Shawn
    AVR: Marantz SR-5011
    Center Channel: Polk LsiM706c
    Front: Polk LsiM703
    Rear: LSI fx
    Subwoofer: SVS 20-39pci
    Television: Samsung UN58NU7100FXZA
    DVD Player: Sony PS4
  • dcmeigs
    dcmeigs Posts: 708
    edited July 2008
    PM sent.

    I'm out. SKS, are you at bat?
    The world is full of answers, some are right and some are wrong. - Neil Young
  • Sami
    Sami Posts: 4,634
    edited July 2008
    I'm in next...