Jolida Sj302A Integrated Amp
nikolas812
Posts: 2,915
For Sale
Jolida Sj302A Integrated Amp
New Cardas Binding Posts
PS Audio Prelude Power Cord
New Sonicaps fully burned in.
3 new Aluminum Volume knobs
Custom Pearl White Paint Job.
NOS Amperex 6dj8's with A getters PQ Orange Labels in the pre amp side
6201 - 12atwa Triple micas in the diver stage. I think there Jan Phillips NOS??
Unknown EL34's in the back. I don't know what they are but they are the best sounding to me. And I have tried a few tubes.
Max Power Output 75wpc at 8 ohms 1KHz
Rated Putput Power 50wpc 25Hz to 70 KHz
Frequency Response (at 1 watt into 8 ohms) 8Hz to 130 KHz +1db
Circuit Type Ultra Linear, Class AB
Output Impedence 4 ohms and 8 ohms
Tube Complement 4- EL34 Power output tubes 2 6dj8 pre amp tubes 212at7 power drivers
Weight 40 pounds
Bias setting 40 millivolts +4 mV I run it at 36mV's Seems to be the most musical at 36mV
The amp sounds fabulous!
$500.00 plus shipping
http://
http://
http://
http://
[URL="http://[IMG]http://i272.photobucket.com/albums/jj162/nikolas812 Picture278.jpg[/IMG]"]http://[/URL]
http://
Jolida Sj302A Integrated Amp
New Cardas Binding Posts
PS Audio Prelude Power Cord
New Sonicaps fully burned in.
3 new Aluminum Volume knobs
Custom Pearl White Paint Job.
NOS Amperex 6dj8's with A getters PQ Orange Labels in the pre amp side
6201 - 12atwa Triple micas in the diver stage. I think there Jan Phillips NOS??
Unknown EL34's in the back. I don't know what they are but they are the best sounding to me. And I have tried a few tubes.
Max Power Output 75wpc at 8 ohms 1KHz
Rated Putput Power 50wpc 25Hz to 70 KHz
Frequency Response (at 1 watt into 8 ohms) 8Hz to 130 KHz +1db
Circuit Type Ultra Linear, Class AB
Output Impedence 4 ohms and 8 ohms
Tube Complement 4- EL34 Power output tubes 2 6dj8 pre amp tubes 212at7 power drivers
Weight 40 pounds
Bias setting 40 millivolts +4 mV I run it at 36mV's Seems to be the most musical at 36mV
The amp sounds fabulous!
$500.00 plus shipping
http://
http://
http://
http://
[URL="http://[IMG]http://i272.photobucket.com/albums/jj162/nikolas812 Picture278.jpg[/IMG]"]http://[/URL]
http://
Post edited by [Deleted User] on
Comments
-
hmmm no likey?
-
Those look like JJ/Tesla EL34's.
Very nice looking amp...what is it around 30 watts per?
MikeModwright SWL 9.0 SE (6Sons Audio Thunderbird PC with Oyaide 004 terminations)
Consonance cd120T
Consonance Cyber 800 tube monoblocks (6Sons Audio Thunderbird PC's with Oyaide 004 terminations)
Usher CP 6311
Phillips Pronto TS1000 Universal Remote -
If I didn't just pick up that dyna kit, I would have been all over this.
Good luck with your sale."He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche -
Just the opposite.
I love it.... It the best piece of gear I've ever owned.
Its just time to move on.
I have some personnel issues that came up also. -
Midnite Mick wrote: »Those look like JJ/Tesla EL34's.
Very nice looking amp...what is it around 30 watts per?
Mike
Oh... I fogot the specs.:o I'll get them posted shortly.
But its 50wpc. -
Nikolas - Who did the paint job?CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
-
-
Nikolas - Who did the paint job?
Me.
My dad owns a body shop. I have been doing it all my life.
I have a run down of the complete process.
There are 3 different types of pearls I used. Two white pearls and one blue.
The paint job alone would have ran $150+ for a walk in. Thats on the low side. The pearls are Extremely expensive. Don't tell dad!:D -
She's a Looker for sure :cool:Rogue Audio stereo 100 tube amplifier - Lector Zoe preamplifier with 6H30 pi's
.Audience AU24SE speaker and ic cables- Chord Qutest DAC - Black Cat Silverstar II 75ohm digital cable-Tyler Acoustics Linbrook Signature system with large bass cabinets to accommodate 10" Seas magnesium woofers. -
jmwest1970 wrote: »...where's the roll of TP go?
LOL!
Tape Player is what it stands for.:D
I had to make due with the graphics I had. -
I love it but now is not the right time. Good luck with your sale. Nice piece.I like speakers that are bigger than a small refrigerator but smaller than a big refrigerator:D
-
Payday Bump...
-
Wow! That is the coolest looking amp!"Wish I didn't know now what I didn't know then." Bob Seger
-
Buy it...:D
Its still for sale....
If nobody bites in within the next two weeks I might end up being able to keep it...
I have to work some over time this weekend though.:) and next weekend.... -
pm sent
-
Sweet!!!2 channel - Willsenton R8 tube integrated, Holo Audio Spring 3 KTE DAC, audio optimized NUC7i5, Windows 10 Pro/JRiver MC29/Fidelizer Plus 8.7 w/LPS and external SSD drive, PS Audio PerfectWave P3 regenerator, KEF R3 speakers, Rythmik F12SE subwoofer, Audioquest Diamond USB cable, Gabriel Gold IC's, Morrow Audio SP5 speaker cables. Computer - Windows 10/JRiver, Schiit Magni 3+/Modi 3+, Fostex PMO.4n monitors, Sennheiser HD600 headphones
-
Unless somebody shows up with some cash real soon I think I am going to keep it.
I had a sweet listening session yesterday with it and it blew me away.
I listened for about 5 hours and towards the end I decided to push it. It hasn't been past the 12 o' clock mark in a long time. I put in some Alan Parsons and turned it up a little at a time. I'll be damn if I didn't max the volume out.:eek: And it was just sweet as ever. The Parsons CD is bit low gain but still. It was very impressive..
Maybe its not time to move on...
I hope I don't get flamed for it. But I think I am going to mate some Lsi's to it. I just can't help it. If it doesn't sound right I will just keep the Lsi's until I get more suitable amplification. I don't think there efficiency is any worse then my 7B's and the amp is four ohm stable. -
No issues at all with keeping it. Rock on!!HT/2-channel Rig: Sony 50 LCD TV; Toshiba HD-A2 DVD player; Emotiva LMC-1 pre/pro; Rogue Audio M-120 monoblocks (modded); Placette RVC; Emotiva LPA-1 amp; Bada HD-22 tube CDP (modded); VMPS Tower II SE (fronts); DIY Clearwave Dynamic 4CC (center); Wharfedale Opus Tri-Surrounds (rear); and VMPS 215 sub
"God grooves with tubes." -
Wait till you put some speakers on those 4 ohm taps...if it's anything like my 502.....damn it's sweet. Keep it....roll some tubes....rock on!
-
BaggedLancer wrote: »Wait till you put some speakers on those 4 ohm taps...if it's anything like my 502.....damn it's sweet. Keep it....roll some tubes....rock on!
Hmmm... Thats good to hear.
Now if I could just my money whoas cleared up.:D -
I apologize for putting this here as it really is not the place, and if you would like me to delete it just let me know, but isn't 50 watts HUGE to try and get out of 2 EL34's? Do you think this is a case of Jolida exaggerating the specs much in the same way they do with the phono stage as per another thread?
MikeModwright SWL 9.0 SE (6Sons Audio Thunderbird PC with Oyaide 004 terminations)
Consonance cd120T
Consonance Cyber 800 tube monoblocks (6Sons Audio Thunderbird PC's with Oyaide 004 terminations)
Usher CP 6311
Phillips Pronto TS1000 Universal Remote -
There are four EL34's
But I assume you mean two for one channel.
Correct?
I think it might a bit exaggerated. Its probably closer to 40wpc. But who knows. I have know way of doing a bench test. -
The only specs that matter are what your ears tell you. What is says on the paper is just another way to enlarge your e-peen. If it sounds good, it is good.
-
Push-pull EL34 willl do 50 watts, as in the EICO HF-52 integrated. Definitely at the limit, though.
-
nikolas812 wrote: »But I think I am going to mate some Lsi's to it. I just can't help it. If it doesn't sound right I will just keep the Lsi's until I get more suitable amplification. I don't think there efficiency is any worse then my 7B's and the amp is four ohm stable.
Great, but be aware the LSi 7's are in fact a lot less efficient, but that shouldn't preclude you from giving it a try because I know a few people on the forum who run low power tubes with LSi's. Just don't expect it to play at loud volume. Depending on your set-up it may actually be to your liking. You won't know until you try it.
H9"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul! -
Great, but be aware the LSi 7's are in fact a lot less efficient, but that shouldn't preclude you from giving it a try because I know a few people on the forum who run low power tubes with LSi's. Just don't expect it to play at loud volume. Depending on your set-up it may actually be to your liking. You won't know until you try it.
H9
Thanks for the advice.
I will be getting a pair of 9's as soon as my money flow is back.:cool: -
My 15wpc tubes sound good; I can imagine that 40-50wpc would sound great. I wish I had some coin for this amp because it is a great deal!
-
Sale Pending..
Looks like a new setup with seperates this time.
I am think of going the Tube pre SS amp way this time with some Lsi9's.:cool: -
I just noticed that giant bird **** in the picture of the amp on your deck. That's a mighty **** right there.....
-
I just noticed that giant bird **** in the picture of the amp on your deck. That's a mighty **** right there.....
Yeah we have a maple tree that shades the deck.
I tried to keep the **** out of the shots but I guess I missed some.
On a sadder note I'm really gonna miss the Jolida.:(
But I am anticipating better things to come.:)