StarQuad Silver Speaker wires 6ft

ben62670
ben62670 Posts: 15,969
edited February 2008 in For Sale (FS) Classifieds
End of roll sale
I have been making a bunch of cables, and I thought I didn't have much left on the spool. So I rolled it out, and had enough for a pair of 6 footers(50feet of cable).
$140 shipped
compare to AQ type 4's in copper at $200;)
These also have low dielectric Teflon insulation.
Sheathed with braided material, and terminated with nanners, and boots.

attachment.php?attachmentid=29762&d=1197306474
Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben
Post edited by ben62670 on

Comments

  • heiney9
    heiney9 Posts: 25,165
    edited February 2008
    Ben, are these the same as I won in the Karma only with different brand of nanner's?

    Plus I don't understand the 6ft./pr = 50 feet of cable :confused:
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
  • dorokusai
    dorokusai Posts: 25,577
    edited February 2008
    It's a 6ft. pair from 50ft. of leftovers.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
  • heiney9
    heiney9 Posts: 25,165
    edited February 2008
    dorokusai wrote: »
    It's a 6ft. pair from 50ft. of leftovers.

    Not important
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
  • nikolas812
    nikolas812 Posts: 2,915
    edited February 2008
    These are very tempting. I have been procrastinating about a pair of your speaker cables forever. These don't look like the ones in the losers karma though. Looks like a different shielding and ends. The shielding looks green or black on these were the ones in the losers karma looked silver. Am I wrong? Not that it matters I guess but I thought the ones in the karma were sexier.:D Did you use different materials on these?? I know this is completely pointless to thread and I wish you the best of luck on your sale. But I AM going to buy a pair from you eventually and was just wondering if this is what they look like now or if you have options. I assume you have options for the ends but what about the shielding? May be this should have been sent in a PM.:o

    Good luck on you sale.
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    8 6 foot pieces make a 6 foot pair;)
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • dorokusai
    dorokusai Posts: 25,577
    edited February 2008
    Oh....they are silver lengths....duh. I get it now.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
  • heiney9
    heiney9 Posts: 25,165
    edited February 2008
    ben62670 wrote: »
    8 6 foot pieces make a 6 foot pair;)

    So they don't come as a "quad" you make them that way? That's what I didn't understand. AQ type IV and Canare come in quad configuration underneath the isolation. So you hand braid 4 separate pieces of wire?

    Anyways if these are the same as Ben gave away for Karma, these are really nicely done and they sound great. Very open and detailed up top and good solid bass too.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    nikolas812 wrote: »
    These are very tempting. I have been procrastinating about a pair of your speaker cables forever. These don't look like the ones in the losers karma though. Looks like a different shielding and ends. The shielding looks green or black on these were the ones in the losers karma looked silver. Am I wrong? Not that it matters I guess but I thought the ones in the karma were sexier.:D Did you use different materials on these?? I know this is completely pointless to thread and I wish you the best of luck on your sale. But I AM going to buy a pair from you eventually and was just wondering if this is what they look like now or if you have options. I assume you have options for the ends but what about the shielding? May be this should have been sent in a PM.:o

    Good luck on you sale.

    Same identical sheathing. My old Nikon was good. The new one's flash makes dark light. The pair I am selling is the pair you see below. Sheathing, no shielding. I can do nearly any color you want. I have been using these nanners for my own. They make a very solid connection(much better than my AQ's nanners), and the price is right;)
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    heiney9 wrote: »
    So they don't come as a "quad" you make them that way? That's what I didn't understand. AQ type IV and Canare come in quad configuration underneath the isolation. So you hand braid 4 separate pieces of wire?

    Anyways if these are the same as Ben gave away for Karma, these are really nicely done and they sound great. Very open and detailed up top and good solid bass too.

    H9

    Yep. I have to make them that way. It's a pia, but I feel it's worth it. I use 4 16's which is the equivalent of 2 13's. I don't like to go too high in ga. I feel you lose some of the top, and detail.
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • Face
    Face Posts: 14,340
    edited February 2008
    Great sounding cables!
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
  • Gadabout
    Gadabout Posts: 1,072
    edited February 2008
    PM Sent
    Without music to decorate it, time is just a bunch of boring production deadlines or dates by which bills must be paid. ..... Frank Zappa
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    Still have a pair.
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • zingo
    zingo Posts: 11,258
    edited February 2008
    Those are the Canare L4E6S Star Quad correct? With the braided shield?
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    Nope these are silver wires hand made star quads
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • Face
    Face Posts: 14,340
    edited February 2008
    zingo wrote: »
    Those are the Canare L4E6S Star Quad correct? With the braided shield?

    No. But I have a question for you, why would you ask the man on a public forum what he uses in his cables?
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
  • MKZ
    MKZ Posts: 1,068
    edited February 2008
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    Nope, its all good. Jake, and I play nice:)
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
  • zingo
    zingo Posts: 11,258
    edited February 2008
    You guys are jumping the gun. If it WERE those cables, I was going to say jump on them because they are rarely used cables and would make a great product. I was not accusing Ben of anything, was just very excited about what he was selling and trying to bump a exceptional cable builder.
  • ben62670
    ben62670 Posts: 15,969
    edited February 2008
    zingo wrote: »
    You guys are jumping the gun. If it WERE those cables, I was going to say jump on them because they are rarely used cables and would make a great product. I was not accusing Ben of anything, was just very excited about what he was selling and trying to bump a exceptional cable builder.

    Ah cut it out dude:cool: You make some pretty sweet cables yourself;)
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben