Rt 10 woofer

akamoses44
akamoses44 Posts: 7
edited May 2008 in Wanted (WTB) Classifieds
Anyone have a woofer for a RT 10. Mine fuzzes out every once in awhile and I assume that the voice coil is rubbing. I press in on the edges of the cone and it quits for awhile but then starts fuzzing again sooner or later.
Post edited by akamoses44 on
· Share on FacebookShare on Twitter

Comments

  • ben62670
    ben62670 Posts: 15,969
    edited April 2007
    Call customer service. They can send you a replacement. Polk has the best CS out there, and welcome to Club Polk. BTW mention that you are a Club Polk member to get a discount.

    Ben
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
    · Share on FacebookShare on Twitter
  • akamoses44
    akamoses44 Posts: 7
    edited April 2007
    Thanks for your suggestion Ben, but I called Polk customer service and was informed that the MW8002 woofer that was used in this speaker is no longer available. That woofer was also used in the RT 7. They also said that a woofer from a RT 20p or a RT 2000 would be a suitable replacement. Thanks again.:)
    · Share on FacebookShare on Twitter
  • cheppi
    cheppi Posts: 3
    edited April 2007
    The rt 20p is a 8 inch driver. Will it securely fit the opening of the rt10 which is a 7.5 inch driver?

    scott
    · Share on FacebookShare on Twitter
  • dougr
    dougr Posts: 124
    edited April 2007
    and the rt16 (2 per cab) as well. I have a pair of RT16s that were damaged in shipping (feet), and if I'm unable to repair or replace the feet to my satisfaction (and convince my better half that they are not THAT big) I may be solving everyone's problems here... I hope not, but who knows.
    ______________________________________________
    RT16 x4, LS/fx x2, CS350 x1, HK247, B&K av5000, B&K avp-2030, pio bdp-51fd, InFocus X10 and a $13 sheet of doable :)
    · Share on FacebookShare on Twitter
  • dougr
    dougr Posts: 124
    edited April 2007
    oops... my bad... RT16 uses MW8103... same size as MW8002, not sure what the difference is or if they are interchangeable???
    ______________________________________________
    RT16 x4, LS/fx x2, CS350 x1, HK247, B&K av5000, B&K avp-2030, pio bdp-51fd, InFocus X10 and a $13 sheet of doable :)
    · Share on FacebookShare on Twitter
  • akamoses44
    akamoses44 Posts: 7
    edited April 2007
    so dougr...how did your attempt to convince your wife that "they are not that big" turn out?
    · Share on FacebookShare on Twitter
  • akamoses44
    akamoses44 Posts: 7
    edited April 2007
    Thank all of you for your help. I ended up finding a seller on Ebay that had one only RT 7 that he was selling so I bought it and had him ship me just the drivers to save on shipping. The RT 7's have the exact same drivers as the RT 10's so it worked out great.
    · Share on FacebookShare on Twitter
  • wongmb
    wongmb Posts: 2
    edited May 2007
    Hi DougR:

    If you RT16 is beyond repair, let me know if you want to sell me one RT16 tweeter. Mine was blown and need replacement. You can email me at m.w@rogers.com

    Thanks.
    · Share on FacebookShare on Twitter
  • bigbub39
    bigbub39 Posts: 13
    edited May 2008
    Hey if you sell him the tweeter I'll take one of the mids I think one of mine is getting ready to sink.
    · Share on FacebookShare on Twitter
  • scootchu
    scootchu Posts: 100
    edited May 2008
    I have a few MW8002's that are NOS Polk Replacement Drivers.
    See my post:
    http://www.polkaudio.com/forums/showthread.php?t=67605
    · Share on FacebookShare on Twitter