system messed up

bolelet1

I had some guests over the weekend and somehow I believed someone messed up my Yamaha settings. I can't remember what frequency it should be but now I see it is at 120kz and everything (L/C/R and surround) is Large. I know the front should be set to small but I'm not sure about the center and surround (I have 5.1 instead of 7.1). Futhermore, it looks like there is no sound coming from my surround speakers. Please help me figure this out. Thank you.

My system:

Yamaha RXV1400
B&K 3140 (Powering the front and center)
Onkyo 282 (Powering the surround)
RTi10
CSi5
FXi5

Serendipity

I would try to run the Yamaha YPAO auto-calibration built into the receiver to get approximate settings for your speakers, and then use an SPL meter for the fine tuning.

I'm sure nothing is actually "messed up," probably just your crossover settings and speaker settings were changed.

The Yamaha YPAO calibration should set the speakers at 80Hz as a starting point for crossover, and then "Small" for all your speakers. If not, try those settings out and see if they work.

cfrizz

Make sure you never invite those particular guests over ever again!:mad:

bolelet1 wrote:

I had some guests over the weekend and somehow I believed someone messed up my Yamaha settings. I can't remember what frequency it should be but now I see it is at 120kz and everything (L/C/R and surround) is Large. I know the front should be set to small but I'm not sure about the center and surround (I have 5.1 instead of 7.1). Futhermore, it looks like there is no sound coming from my surround speakers. Please help me figure this out. Thank you.

My system:

Yamaha RXV1400
B&K 3140 (Powering the front and center)
Onkyo 282 (Powering the surround)
RTi10
CSi5
FXi5

bolelet1

Will do and for sure no more guests in the meantime. lol. What I am worried about is that no sound seems to come out from the surround speakers. I will try the YPAO and see what happens Thanks.