Balanced Audio Technology

reeltrouble1
reeltrouble1 Posts: 9,312
edited October 2006 in 2 Channel Audio
Well, as the PF06 crowd knows the BAT VK-31SE preamp developed a hiss in the right channel the first night of the Fest. Sort of dissapointing and since Doro's pre had gotten jinxed during the last fest in SC, I was like WTF???

Anyway, I had wanted to share how neutral this pre is with the gang, its the most neutral I have owned to date, whether you like that sort of thing is an individual subjective thing, but it defines neutral, utilizing the 6h30 super tube, large power supplies for each channel, impressive capacitor set-up for speed/quickness and plenty of storage, metal film resistors, a shunt volume control and short siganl paths. But enough of all that, besides the Dodd MLP filled in just fine.

What I really want to say is how impressed I am with BAT's service, I sent the unit to BAT on Tuesday last week and it is scheduled for delivery back to me this Thursday so 10 days out of the rack including ship time and a weekend. They got the unit on Thursday repaired it Friday and shipped it out on Monday, this is exceptional, oh, BTW it was a voltage regulator that went noisy on me, the total cost for repair (out of warranty) was 110.00 including shipping. The bill comes as an invoice and you are told not to pay it until you get the unit and try it out.

One more thing, when I have called BAT with a question I have found that I should set aside some time, these folks are very into audio and their products, you get your answer and a tutorial in why they do things a certain way.

I just wanted to give them some kudo's for the fast service, of course the real test will come when I get her back in the Shed Thursday, hoping the shipping gorillas are tame on its way back to me.

RT1
Post edited by reeltrouble1 on
· Share on FacebookShare on Twitter

Comments

  • ND13
    ND13 Posts: 7,601
    edited October 2006
    Did they clean that dusty effer up for ya while they were in there??

    Glad it was something minor.
    "SOME PEOPLE CALL ME MAURICE,
    CAUSE I SPEAK OF THE POMPITIOUS OF LOVE"
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    That is magic dust my good friend, a bit of Garcia is mixed in!!!!

    RT1
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,552
    edited October 2006
    Excellent news!

    I like the line you quoted me, "Send 31SE to me, I fix BAT."....LOL
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    with heavy Russian accent!!!!!!!!!

    Vladimer (chief service tech): We make everything work nice...together all BAT work very nice, we have three power transmission line to factory, you put BAT to BAT, balanced power is key.

    me, yea when you going to make an SACD player?

    Vlad: That is not in our plan.......waaaaaaaaaa

    all very Russain you know, err.....lost a bit of humour when I mentioned an English made SACD................anyway, they are a kick to deal with.

    RT1
    · Share on FacebookShare on Twitter
  • SCompRacer
    SCompRacer Posts: 8,497
    edited October 2006
    Vladimer is a trip to talk to. When I got my 3i with remote volume, someone had told me to discharge myself of static before touching the volume knob or I could blow the remote board. I used the remote most of the time, unless I was spinning vinyl and was close to the pre and some adjustment was required before sitting down.

    One day I quickly reached to turn it down without discharging myself on the case first and I had one of them stage 4 static discharges that you can see, hear and feel. Could have been the smoking jacket.... Anyway, the volume went way loud and while the display changed, the volume wouldn't. Vladimer fix....and he implemented the static discharge protection found in later units. Funny thing was Victor would not allude to the extistance of that problem, where Vladimer would acknowledge "leetle problem, need ground"....
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    yikes, lets keep Vladdy out of the Goolag then........leetle prison, Victor is boss of BAT, dont want no static about things....

    RT1
    · Share on FacebookShare on Twitter
  • disneyjoe7
    disneyjoe7 Posts: 11,435
    edited October 2006
    Ok the pre amp will work again, nice to see you got it fix and it was cheap.


    But now the Question is does the remote still work ;)

    Speakers
    Carver Amazing Fronts
    CS400i Center
    RT800i's Rears
    Sub Paradigm Servo 15

    Electronics
    Conrad Johnson PV-5 pre-amp
    Parasound Halo A23
    Pioneer 84TXSi AVR
    Pioneer 79Avi DVD
    Sony CX400 CD changer
    Panasonic 42-PX60U Plasma
    WMC Win7 32bit HD DVR


    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    Vlad recommends five days in Goolag for dropsies, plenty of time to hold remote in hand.:)

    RT1
    · Share on FacebookShare on Twitter
  • SCompRacer
    SCompRacer Posts: 8,497
    edited October 2006
    I've got a small dent in the harwood floor from a BAT remote. No damage to the remote at all.
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,643
    edited October 2006
    That BAT remote, while stout - is a weakling in comparison to that Jolida JD100 remote...

    Which is a deadly object, which if thrown - could easily injure or kill someone.
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • Dennis Gardner
    Dennis Gardner Posts: 4,861
    edited October 2006
    Vr3MxStyler2k3 wrote:
    That BAT remote, while stout - is a weakling in comparison to that Jolida JD100 remote...

    Which is a deadly object, which if thrown - could easily injure or kill someone.

    Isn't that one of those crime deterrent devices like those cell phones?:)
    HT Optoma HD25 LV on 80" DIY Screen, Anthem MRX 300 Receiver, Pioneer Elite BDP 51FD Polk CS350LS, Polk SDA1C, Polk FX300, Polk RT55, Dual EBS Adire Shiva 320watt tuned to 17hz, ICs-DIY Twisted Prs, Speaker-Raymond Cable

    2 Channel Thorens TD 318 Grado ZF1, SACD/CD Marantz 8260, Soundstream/Krell DAC1, Audio Mirror PP1, Odyssey Stratos, ADS L-1290, ICs-DIY Twisted , Speaker-Raymond Cable
    · Share on FacebookShare on Twitter
  • TroyD
    TroyD Posts: 13,077
    edited October 2006
    Anyone who has not heard RT1 do his impression of Mad Vlad is missing out. Funny stuff, brohams

    BDT
    I plan for the future. - F1Nut
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    BAT is back, no hissssss, Vlad fix, clean everything, play nicey nice now.

    Eight days total out of the rack.

    Check out the BAT channel with Victor and the BAT Gang. I would recommend this company as one to consider for future purchases or upgrades.

    http://www.newcenturytv.com/BAT/
    · Share on FacebookShare on Twitter
  • disneyjoe7
    disneyjoe7 Posts: 11,435
    edited October 2006
    RT1,

    You need to demo that thing for PolkFest06a my house south. :D

    Speakers
    Carver Amazing Fronts
    CS400i Center
    RT800i's Rears
    Sub Paradigm Servo 15

    Electronics
    Conrad Johnson PV-5 pre-amp
    Parasound Halo A23
    Pioneer 84TXSi AVR
    Pioneer 79Avi DVD
    Sony CX400 CD changer
    Panasonic 42-PX60U Plasma
    WMC Win7 32bit HD DVR


    · Share on FacebookShare on Twitter
  • W WALDECKER
    W WALDECKER Posts: 900
    edited October 2006
    reeltrouble1 wrote:
    BAT is back, no hissssss, Vlad fix, clean everything, play nicey nice now.

    Eight days total out of the rack.

    Check out the BAT channel with Victor and the BAT Gang. I would recommend this company as one to consider for future purchases or upgrades.

    http://www.newcenturytv.com/BAT/
    :) Hey Big Daddy, i am glad to hear that she is up and running now.i called customer service at BAT once with a question about tube rolling and the guy on the line kept me on the phone for a half an hour. BAT is a great company to deal with and i would have no problem with buying more of thier Gear in the distant future. thanks....WCW III
    Rogue Audio stereo 100 tube amplifier - Lector Zoe preamplifier with 6H30 pi's
    .Audience AU24SE speaker and ic cables- Chord Qutest DAC - Black Cat Silverstar II 75ohm digital cable-Tyler Acoustics Linbrook Signature system with large bass cabinets to accommodate 10" Seas magnesium woofers.2xhmpsuownoj.jpg
    · Share on FacebookShare on Twitter
  • reeltrouble1
    reeltrouble1 Posts: 9,312
    edited October 2006
    Yea, they are something, I finally figured out the American guy who usually answers the phone is Steve Bednarski, co-founder of the company.

    RT1
    · Share on FacebookShare on Twitter