anybody have/use a amp stand ?

faster100

Im getting my rotel 2 channel amp tomorrow to power the lsi15's and ran out of room on my audio rack.. I think beings i have a wall mount tv that an amp stand under it and in between the mains would look and work great!! any idea's on reasonable brands, anyone have one to sell? stuff like that.. suggestions

I called my local granite shop and they will make a 19" x 22" (stole the dimensions from a commercially made one) round over the edge and polish it and drill 4 holes in the bottom for spikes/feet for around $100 bucks

okiepolkie

Salamander makes a nice one. It can probably be had online for about $150. Take a look at audio advisor. Sometimes they have them on sale.

BTW, $100 for the granite really isn't too bad. At about $50 sq/ft, it isn't a cheap item.

Early B.

Definitely get the granite. For $100, you can't beat it. Just buy a set of nice spikes for it and you're good to go.

A less expensive alternative is to get a 2" thick cutting board and drill your own holes. Check out www.timbernation.com for the best prices. He sells stuff on the 'gon, too.

Shizelbs

I'd get the granite.

amulford

Granite.

madmax

If you are having one made you might as well measure the amp and make it fit.
madmax

I-SIG

You mean something like this...

Wes

ETA: My A/V Rack

faster100

I-SIG wrote:

You mean something like this...

Wes

No, just a stand for the amp... The 1080 rotel im getting, I have an audio rack for the rest of the stuff.. but that is a cool rack and we went back and forth if we wanted a stand for under the plasma or the one off to one side.

Dennis Gardner

I use this stand, since it matches my EFAV-3 Euro II.

http://www.audioadvisor.com/store/productdetail.asp?sku=SANEFAB2

I would go with granite though if had the $100 pricing in my area.

dkg999

I use 18" concrete patio blocks, painted black and silicone sealed to a plywood base that has spiked feet from Parts Express mounted. Works great. I have my Outlaw M200's for my HT on these. I also mounted wood strips around the outside, also painted black, so all you see is about 1/4" of the concrete patio block sticking up. Works great, and cheap!

madmax

I-SIG wrote:

You mean something like this...

Wes

ETA: My A/V Rack

Someone needs a cable specialist... :eek:
madmax

faster100

after all this, i might be able to fit it on the rack if i put my dvd on the pre.. I still like the granite idea and its not out of the question yet.. Thanks for all the help

madmax

A nice piece of MDF covered with vinyl and spikes on the bottom will do everything you need very cheaply.
madmax

I-SIG

madmax wrote:

Someone needs a cable specialist... :eek:
madmax

I'm not quite ready to start drilling holes in my sheetrock for the TV cables. Plus, I'm trying to spread the load around to different outlets. Onc eI install my new 20A outlets, hopefully this winter sometime, things will improve greatly.

Wes

madmax

You could just tie wrap the bunch together, pull them to the side and let them hang down next to the speaker. Who am I to talk anyway, mine are a mess...
madmax

okiepolkie

Just don't run the power cable in the wall. If you are running new lines to the room, take a look at the Panamax MIW(mount in wall) surge protection system. It uses romex in the wall and a recessed outlet behind the television, and an the other end at the base of the wall.