Box dimensions for MOMO 2104
dannyj
Posts: 18
I am getting ready to build a box for my sub and the deminsions specified on this site are 15" W X 13" H and 9 1/16 D. Based on my calculations the box will have an internal volume of .72 cu. ft. The specs recommend .66. Is my math wrong or is .72 an acceptable internal volume?
Post edited by dannyj on
Comments
-
Those are external dimensions.
If you use 3/4" wood that would be 13.5 x 11.5 x 7.5 which comes out to .67 ft3.
Id stick with the .66 if I were you. Manufacturer specs are usually the best way to go.polkaudio sound quality competitor since 2005
MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st
polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D -
Ok so I got the box together and the internal dimensions turned out 13 9/16 W X 11 3/8 H X 7 3/4 D. Has a volume of .69 cu. ft. Is it going to sound awful being 3 hundreths off or is this acceptable?
-
You will be fine....Alpine: CDA-7949
Alpine: PXA-H600
Alpine: CHA-S624, KCA-420i, KCA-410C
Rainbow: CS 265 Profi Phase Plug / SL 165
ARC Audio: 4150-XXK / 1500v1-XXK
JL Audio: 10W6v2 (x2)
KnuKonceptz
Second Skin -
Yup, .03 wont make much of a difference at all and certainly not one youll notice.polkaudio sound quality competitor since 2005
MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st
polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
