Help with Quote on Carver TFM-6CB
AndyGwis
Posts: 3,655
Hey Guys,
I think this inquiry is best placed in the For Sale section, although I am not actually selling anything at this time.
I inherited 2 Carver TFM 6-CB amps, and I think I'm only going to need one of them. Likely going to sell the second. What's a fair market price? Here are some specs and background info I was able to find. . . not much out there on this amp.
Like New condition, likely originally purchased around 1999.
Carver TFM-6CB 2-channel Power Amplifier. This low-profile, small-footprint, conservatively rated at 65 watts RMS per channel into 8 ohms with both channels driven, 20Hz-20kHz with no more than 0.1% THD. It will also supply 100 watts RMS per channel into a 4 ohm load, both channels driven, 20Hz-20kHz with no more than 0.1% THD, and 160 watts dynamic power into 2 ohms. The TFM-6CB can be also configured in mono mode, and can supply 200 watts of power into an 8 ohm load. (bridging is selectable via a switch on the back panel). The TFM-6CB is also capable of driving 2 sets of speakers.
Any help would be appreciated. I will probably be putting the second one up for sale either here or on ebay (if my brother doesn't outright steal it from me).
Thanks!
I think this inquiry is best placed in the For Sale section, although I am not actually selling anything at this time.
I inherited 2 Carver TFM 6-CB amps, and I think I'm only going to need one of them. Likely going to sell the second. What's a fair market price? Here are some specs and background info I was able to find. . . not much out there on this amp.
Like New condition, likely originally purchased around 1999.
Carver TFM-6CB 2-channel Power Amplifier. This low-profile, small-footprint, conservatively rated at 65 watts RMS per channel into 8 ohms with both channels driven, 20Hz-20kHz with no more than 0.1% THD. It will also supply 100 watts RMS per channel into a 4 ohm load, both channels driven, 20Hz-20kHz with no more than 0.1% THD, and 160 watts dynamic power into 2 ohms. The TFM-6CB can be also configured in mono mode, and can supply 200 watts of power into an 8 ohm load. (bridging is selectable via a switch on the back panel). The TFM-6CB is also capable of driving 2 sets of speakers.
Any help would be appreciated. I will probably be putting the second one up for sale either here or on ebay (if my brother doesn't outright steal it from me).
Thanks!
Stereo Rig: Hales Revelation 3, Musical Fidelity CD-Pre 24, Forte Model 3 amp, Lexicon RT-10 SACD, MMF-5 w/speedbox, Forte Model 2 Phono Pre, Cardas Crosslink, APC H15, URC MX-950, Lovan Stand
Bedroom: Samsung HPR-4252, Toshiba HD-A2, HK 3480, Signal Cable, AQ speaker cable, Totem Dreamcatchers, SVS PB10-NSD, URC MX-850
Bedroom: Samsung HPR-4252, Toshiba HD-A2, HK 3480, Signal Cable, AQ speaker cable, Totem Dreamcatchers, SVS PB10-NSD, URC MX-850
Post edited by AndyGwis on
Comments
-
I sold a Carver TFM 15CB shipped for $225. Id say a 6 would go for around half that. Check Ebay to be sure theyre on there oftenPioneer SC-37
RTiA9-fronts
CSiA6-center
RT55i-surrounds
SVS PB13 Ultra & PSW650
Monster Power 3250 amp
Monster Power 2250 amp
Monster Power HDP-2500 surge pro.
Denon 3805,CS400i,RT25i's & FX500i's sitting in the basement collecting dust -
Neither model is a magnetic field power amp. They are both conventionals.
