Polk Audio PSW450 Woofer and amp for sale!!!

jerm357
jerm357 Posts: 6
edited May 2010 in For Sale (FS) Classifieds
I have the 12" woofer and 150watt RMS amp from a PSW450 subwoofer for sale. They are in like new condition rarely used, never pushed past the half way point on amp volume. looking for like $150 for the set. If anyone is interested let me know.
Big 12-inch direct radiating subwoofer driver for deep bass
Magnetically shielded for safe placement near TVs
High current power amplifier
Auto on/off circuit that automatically turns your subwoofer on when it senses a program signal. When no signal is present, the amplifier turns off within 15 minutes
Unfiltered LFE input for use with low pass filtered subwoofer output jacks
5-way binding post speaker-level inputs and outputs
Switchable 80Hz hi-pass filter
Dynamic Power Output 300 watts
Still have the Grill and Manul

Heres my Ebay feedback http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=jerm357&iid=
Post edited by jerm357 on
· Share on FacebookShare on Twitter

Comments

  • WilliamM2
    WilliamM2 Posts: 4,780
    edited February 2006
    What happened to the cabinet?
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited February 2006
    jerm, while it's nice of you to offer up Polk products in here.... it's not proper to ask for a best offer type of sale. We prefer that you set your price and have someone buy it from you. We don't bid against each other. this is a community of club members who enjoy Polk Audio products.

    If you want to set a firm price... that's the best way to sell items in here. It also helps to offer some way for us to check your feedback, say on Ebay. If you're looking to make a fast buck... then Ebay would be a better place to sell your woofer and amp.

    good luck.
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • jerm357
    jerm357 Posts: 6
    edited February 2006
    The bottom of the box took some water damage right around one of the front feet from a near by potted plant that was getting the carpet wet(that I did not know). When I found out (because the box was not sitting flat) I wiggled the foot and and it just came out and left a hole. The hardware was not touched at all and is still in great condition.
    · Share on FacebookShare on Twitter
  • ray157
    ray157 Posts: 3
    edited March 2010
    Hi, and I'm ashamed now. On my Polk PSW450 sub, I tried to bypass the broken power toggle switch. Just about cooked the soldering strips on the board. I killed it, yes, I don't have my sound anymore. I am VERY interested in just your amp only. Some youngster could use the woofer in his car but the amp is what I NEED. Very hard to find, right???
    Please contact ray157@comcast.net

    Thanks, Ray
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited March 2010
    dude um this thread is 4 years old, and also the OP has only 5 post, most of which are in this thread, so I really don't think he's been around a lot.
    · Share on FacebookShare on Twitter
  • Knucklehead
    Knucklehead Posts: 3,602
    edited March 2010
    Wow.....
    Polk Audio Surround Bar 360
    Mirage PS-12
    LG BDP-550
    Motorola HD FIOS DVR
    Panasonic 42" Plasma
    XBOX 360[/SIZE]

    Office stuff

    Allied 395 receiver
    Pioneer CDP PD-M430
    RT8t's & Wharfedale Diamond II's[/SIZE]

    Life is one grand, sweet song, so start the music. ~Ronald Reagan
    · Share on FacebookShare on Twitter
  • Kex
    Kex Posts: 5,205
    edited March 2010
    ray157 wrote: »
    ... the amp is what I NEED. Very hard to find, right??? ...
    Ray, welcome to Club Polk. Just in case: have you tried to e-mail or phone Customer Service? You might just be surprised at what they might have in the archives sometimes. I would try there first. You can even use the chat feature, which should be visible on the top right of your screen.

    The original poster of this thread did visit the forum as recently as November 2009, but has not been visibly active much in recent years (he may just be browsing without actually posting, of course). You could wait and see if he responds ... who knows what might happen?

    Otherwise, I do have a PSW150 with a damaged driver. You could probably have the amp from that, if it can be made to work (I have no idea). It is listed on the product page as 200w.

    http://www.polkaudio.com/homeaudio/specs/recent/psw450/
    http://www.polkaudio.com/homeaudio/products/recent/psw150/
    Alea jacta est!
    · Share on FacebookShare on Twitter
  • jerm357
    jerm357 Posts: 6
    edited March 2010
    Im still around, I just dont post very much. I have already talked to Ray and was sorry to tell him I had already sold the amp and driver about 4 years ago. I figured I would make a post here to let every one else know that this has been sold so nobody else gets there hopes up. It really sucks when something breaks and you think you have found the parts you need just to find out there not available anymore.
    · Share on FacebookShare on Twitter
  • ray157
    ray157 Posts: 3
    edited May 2010
    Hi Kex, I forgot all about this forum and following up on my request for the psw450 amp. I would LOVE to get the amp from you on the psw150. Contact me through my ray157@comcast.net email. Thank you for the reply too. I thought the world hated me. heehee.
    · Share on FacebookShare on Twitter