Frequency settings?????
YoungBlood
Posts: 2
I have a Sony STR DB930 receiver and just bought a set of RTi8, FXi3 & CSi3. I want to get the best sound possible, but am not very good with frequency settings, I am not exactly sure how to decide where to set them.
On my receiver you can adjust the low, mids & high passes for each channel,
Here are the settings,
low pass: 100Hz - 1kHz
mid pass: 500Hz - 5kHz
high pass:1khz - 10kHz
Any suggestions would be great.
On my receiver you can adjust the low, mids & high passes for each channel,
Here are the settings,
low pass: 100Hz - 1kHz
mid pass: 500Hz - 5kHz
high pass:1khz - 10kHz
Any suggestions would be great.
Post edited by YoungBlood on
Comments
-
-
I think you are mistaken about the crossovers. They should be between 40 hz and 150 hz. Check the manual again.
You are probably looking at some sort of EQ settings. I would set those all to normal or turn off if possible. -
I do have a Sub, and it is turned on in the setup.
As for the frequency settings I will have to check my manual and get back to you. What do you mean by normal? Is that mid way on the scale? -
If it is an equilizer setting, I would try to turn it off or set it in the middle. IMO they just screw up the sound. Let me know what the manual says about crossover settings.
-
The sony eq is a joke. I had that same eq on my old ES model. Just turn it off and leave it off. And keep the bass boost off as well.
