Biwiring with Monitor speakers and Harman Kardon receiver
bailey2952
Posts: 1
Hi, I'm a newbie, so I need some advice. I've decided to go ahead and try biwiring. I have Polk Monitor 30 speakers and a Harman Kardon HK 3480 receiver. If I biwire, can I use both the A and B speaker outputs? I did a search for biwiring on the forum already and someone with a similar idea had mixed responses (some said it would work, another said it wouldn't). Would I be able to do that? Should I? Also, is it worthwhile to get speaker connectors? Should I just get pins or banana connectors?
Thanks for all your help
Bailey
Thanks for all your help
Bailey
Post edited by bailey2952 on
Comments
-
If your speakers have two sets of binding posts, then yes you can bi-wire them. Personally, I wouldn't bother especially with a receiver. Instead of bi-wiring, replace the stock jumpers with the same kind of wire you are using for speaker cable. You'll get better results for a lot less money.
Speaker connectors??? Banana's, pins and spades are a way to terminate the ends of speaker cable, if that's what you're asking. I prefer banana's.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
F1nut wrote:If your speakers have two sets of binding posts, then yes you can bi-wire them. Personally, I wouldn't bother especially with a receiver. Instead of bi-wiring, replace the stock jumpers with the same kind of wire you are using for speaker cable. You'll get better results for a lot less money.
Speaker connectors??? Banana's, pins and spades are a way to terminate the ends of speaker cable, if that's what you're asking. I prefer banana's.
good advice. that's what i did with my 4's and made a noticeable difference (calmed the tweeter down a bit)- I took the jumpers off and replaced them with 4 inches of 14g speaker wire, then I used banana plugs to terminate.