Polk C400.4 enough to power MMC6500 & db570?

aphexii
aphexii Posts: 1
edited July 2007 in Car Audio & Electronics
Thinking of getting the following;

Polk C400.4 Amp
MMC6500 for the front
db570 for the rear

Will the amp (which is rated at 75w/ch) be enough?

I read a review that the amp is underrated, and that it actually gets closer to 100w/ch at 13.1v and 4 ohms....
Post edited by aphexii on

Comments

  • PolkThug
    PolkThug Posts: 7,532
    edited August 2005
    Should be fine. I think the birth sheet on mine is 94w per channel. Of course you can always add an amp later if you're not satisfied.
  • MacLeod
    MacLeod Posts: 14,358
    edited August 2005
    That amp will be a perfect match. They make well over 75 watts cleanly and will power those speaker well.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
  • zgw8
    zgw8 Posts: 78
    edited August 2005
    I just got my C400.4 and the birthsheet tested at 95 watts per channel!
  • csnut18
    csnut18 Posts: 48
    edited July 2007
    I feel like I got screwed cause my birthsheet said 89x4 on my c400.4
  • MacLeod
    MacLeod Posts: 14,358
    edited July 2007
    csnut18 wrote: »
    I feel like I got screwed cause my birthsheet said 89x4 on my c400.4

    Well considering you only paid for 75 watts and you got 89 instead, Id say you got a pretty good deal.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D