CSi5

huy30
huy30 Posts: 1
edited August 2005 in Basic Hookup/Wiring Questions
I need some help about CSi5 center speaker. This is my first set of surround speakers. I see that this speaker has 4 connectors on the back (2 positive and 2 negative). I looked at the manual and saw that you can have different setup. I just want to use this as center speaker, so I just use any set of 1-red and 1-black connector? Thanks.
Post edited by huy30 on
· Share on FacebookShare on Twitter

Comments

  • Crazed
    Crazed Posts: 60
    edited August 2005
    Yes, as long as the brass plates connecting the two reds and two blacks are in place.
    Main System:
    PreAmp: Rotel 1098 with MF X-10v3
    Amp: Rotel 1090, 1075, 1070
    Source: Pro-Ject RM9 with Blackbird Cart., Denon 2900 with MF X-DACv3
    Speakers: Gallo Ref 3s (LR), Gallo Due (C, SR, SL), Gallo Micro (RR, RL)


    Second System:
    Receiver: H/K AVR 630
    Source: Pioneer 563
    Speakers: Polk RTi10s (LR), CSi5 (C), RTR 200 (SR, SL)
    · Share on FacebookShare on Twitter
  • tecmo04
    tecmo04 Posts: 421
    edited August 2005
    the 2 terminals are for bi-wiring. whether u use both sets(make sure you remove the jumpers if you do) or just the one it will still only play the center channel sounds. what the 2 two terminals does is take the high freq's and low freq's and split them up. some say it sounds better, others dont notice a difference. the choice is up to your ears!
    My Stuff
    · Share on FacebookShare on Twitter