What component got high SPL?

NOISESTEEL
NOISESTEEL Posts: 3
edited July 2005 in Car Audio & Electronics
Hi, i got a system with high SPL (MTX 1501D + MTX T9515 4+4) and need any kit to make my stereo with high volume and SPL. It will be played in my Precision Power PC650 (6 channels), i will use 2 bridges 200W RMS for each.

I'm thinking and i liked the db6500 and MMC6500 (in that order).


So, i need sugestions to safe my stereo.

Thanks a lot!


PS: Sory, my english is not good.
Project: HU 860MP, MB quart PCE 216 (ser
Post edited by NOISESTEEL on
· Share on FacebookShare on Twitter

Comments

  • MacLeod
    MacLeod Posts: 14,358
    edited July 2005
    The Momo is a better built speaker and will handle more power and so it will sound better loud. Get the Momo.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • NOISESTEEL
    NOISESTEEL Posts: 3
    edited July 2005
    Humm so mm6 is powerfull. But it can be played with 200 W RMS each kick panel, with no problems (course, no distortion in osciloscope)? I know, most pples here use components speakers in door...but anyone have simulated mm6 in kick panel (floorstanding)?


    Any other sugestion in components speakers (high sensivity, Qts, durability, low Fs,...high power!)

    Thanks a lot! Fernando
    Project: HU 860MP, MB quart PCE 216 (ser
    · Share on FacebookShare on Twitter
  • exalted512
    exalted512 Posts: 10,735
    edited July 2005
    my old mm6s handled 225 for about 3 years before i started popping the leads off the terminal...
    -Cody
    Music is like candy, you have to get rid of the rappers to enjoy it
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited July 2005
    You could just give them the 150 they require and they would be plenty loud enough. The db difference between 150 adn 200 watts would probably not be able to be noticed. Plus youre speakers would last longer.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • ND13
    ND13 Posts: 7,601
    edited July 2005
    Originally posted by MacLeod
    You could just give them the 150 they require and they would be plenty loud enough. The db difference between 150 adn 200 watts would probably not be able to be noticed. Plus youre speakers would last longer.

    +1, I've got the MMC6500s being installed tommorrow and they'll be driven by a Phoenix Gold R4.0:2 with about 125 wpc@4ohms and 200 @2ohms. I'm sure that'll be most ample.
    "SOME PEOPLE CALL ME MAURICE,
    CAUSE I SPEAK OF THE POMPITIOUS OF LOVE"
    · Share on FacebookShare on Twitter
  • exalted512
    exalted512 Posts: 10,735
    edited July 2005
    yea but then you wont have an excuse to upgrade:D
    -Cody
    Music is like candy, you have to get rid of the rappers to enjoy it
    · Share on FacebookShare on Twitter