mmc650 in 6.75 door mount

knieght rieduz
knieght rieduz Posts: 7
edited February 2005 in Car Audio & Electronics
Hey guys, i have a set of polk mmc650s. i took apart my srt4 and tried to install them in the front door. they dont line up with the stock speaker mount nor does the ring that came with the speakers work. would this require custom fabrication or are there rings i can buy that will work?

thanks guys
Post edited by knieght rieduz on
· Share on FacebookShare on Twitter

Comments

  • exalted512
    exalted512 Posts: 10,735
    edited February 2005
    if you have any spare wood, preferrably mdf but plywood works too, just build a spacer that you can screw in to your door, then screw the speaker to the wood
    -Cody
    Music is like candy, you have to get rid of the rappers to enjoy it
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited February 2005
    Agreed.

    Just run down to your nearest Lowes and pick up a 1'x2' sheet of 1/4" MDF or birch plywood and build your own baffle.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • knieght rieduz
    knieght rieduz Posts: 7
    edited February 2005
    thanks for the help guys, i'll go try that out.
    · Share on FacebookShare on Twitter